FlexSPI Configuration Block (FCB)
The FCB will configure the settings of the FlexSPI communication. It will establish how many ports will be used, what clock speed to run the FlexSPI controller at, etc. This is the first thing that happens, as everything else is stored in Flash memory. In order to read anything else, the flash must first be configured.
FCB template for lpc55s3x and flexspi_nor
family(string): MCU family name. Must be one of:["lpc55s3x", "rt101x", "rt102x", "rt104x", "rt105x", "rt106x", "rt116x", "rt117x", "rt118x", "rt5xx", "rt6xx", "rw61x"].revision(string): If needed this could be used to specify silicon revision of device. Must be one of:["latest"].type(string): Specify type of memory used by FCB description. Must be one of:["flexspi_nor"].fcb_settings(object)tag(object): [0x000-0x003] Tag, fixed value 0x42464346UL.value([‘string’, ‘number’], required): [0x000-0x003] Tag, fixed value 0x42464346UL.
version(object): [0x004-0x007] Version,[31:24] -‘V’, [23:16] - Major, [15:8] - Minor, [7:0] - bugfix.value([‘string’, ‘number’], required): [0x004-0x007] Version,[31:24] -‘V’, [23:16] - Major, [15:8] - Minor, [7:0] - bugfix.
reserved0(object): [0x008-0x00b] Reserved for future use.value([‘string’, ‘number’], required): [0x008-0x00b] Reserved for future use.
readSampleClkSrc(object): [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3.value([‘string’, ‘number’], required): [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3.
csHoldTime(object): [0x00d-0x00d] CS hold time, default value: 3.value([‘string’, ‘number’], required): [0x00d-0x00d] CS hold time, default value: 3.
csSetupTime(object): [0x00e-0x00e] CS setup time, default value: 3.value([‘string’, ‘number’], required): [0x00e-0x00e] CS setup time, default value: 3.
columnAddressWidth(object): [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For Serial NAND, need to refer to datasheet.value([‘string’, ‘number’], required): [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For Serial NAND, need to refer to datasheet.
deviceModeCfgEnable(object): [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable.value([‘string’, ‘number’], required): [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable.
deviceModeType(object): [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, Generic configuration, etc.value([‘string’, ‘number’], required): [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, Generic configuration, etc.
waitTimeCfgCommands(object): [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for DPI/QPI/OPI switch or reset command.value([‘string’, ‘number’], required): [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for DPI/QPI/OPI switch or reset command.
deviceModeSeq(object): [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt sequence number, [31:16] Reserved.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
deviceModeArg(object): [0x018-0x01b] Argument/Parameter for device configuration.value([‘string’, ‘number’], required): [0x018-0x01b] Argument/Parameter for device configuration.
configCmdEnable(object): [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable.value([‘string’, ‘number’], required): [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable.
configModeType_0(object): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe.value([‘string’, ‘number’], required): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe.
configModeType_1(object): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe.value([‘string’, ‘number’], required): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe.
configModeType_2(object): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe.value([‘string’, ‘number’], required): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe.
configCmdSeqs_0(object): [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
configCmdSeqs_1(object): [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
configCmdSeqs_2(object): [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
reserved1(object): [0x02c-0x02f] Reserved for future use.value([‘string’, ‘number’], required): [0x02c-0x02f] Reserved for future use.
configCmdArgs_0(object): [0x030-0x03b] Arguments/Parameters for device Configuration commands.value([‘string’, ‘number’], required): [0x030-0x03b] Arguments/Parameters for device Configuration commands.
configCmdArgs_1(object): [0x030-0x03b] Arguments/Parameters for device Configuration commands.value([‘string’, ‘number’], required): [0x030-0x03b] Arguments/Parameters for device Configuration commands.
configCmdArgs_2(object): [0x030-0x03b] Arguments/Parameters for device Configuration commands.value([‘string’, ‘number’], required): [0x030-0x03b] Arguments/Parameters for device Configuration commands.
reserved2(object): [0x03c-0x03f] Reserved for future use.value([‘string’, ‘number’], required): [0x03c-0x03f] Reserved for future use.
controllerMiscOption(object): [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more details.value([‘string’, ‘number’], required): [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more details.
deviceType(object): [0x044-0x044] Device Type: See Flash Type Definition for more details.value([‘string’, ‘number’], required): [0x044-0x044] Device Type: See Flash Type Definition for more details.
sflashPadType(object): [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal.value([‘string’, ‘number’], required): [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal.
serialClkFreq(object): [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot Chapter for more details.value([‘string’, ‘number’], required): [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot Chapter for more details.
lutCustomSeqEnable(object): [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot be done using 1 LUT sequence, currently, only applicable to HyperFLASH.value([‘string’, ‘number’], required): [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot be done using 1 LUT sequence, currently, only applicable to HyperFLASH.
reserved3_0(object): [0x048-0x04f] Reserved for future use.value([‘string’, ‘number’], required): [0x048-0x04f] Reserved for future use.
reserved3_1(object): [0x048-0x04f] Reserved for future use.value([‘string’, ‘number’], required): [0x048-0x04f] Reserved for future use.
sflashA1Size(object): [0x050-0x053] Size of Flash connected to A1.value([‘string’, ‘number’], required): [0x050-0x053] Size of Flash connected to A1.
sflashA2Size(object): [0x054-0x057] Size of Flash connected to A2.value([‘string’, ‘number’], required): [0x054-0x057] Size of Flash connected to A2.
sflashB1Size(object): [0x058-0x05b] Size of Flash connected to B1.value([‘string’, ‘number’], required): [0x058-0x05b] Size of Flash connected to B1.
sflashB2Size(object): [0x05c-0x05f] Size of Flash connected to B2.value([‘string’, ‘number’], required): [0x05c-0x05f] Size of Flash connected to B2.
csPadSettingOverride(object): [0x060-0x063] CS pad setting override value.value([‘string’, ‘number’], required): [0x060-0x063] CS pad setting override value.
sclkPadSettingOverride(object): [0x064-0x067] SCK pad setting override value.value([‘string’, ‘number’], required): [0x064-0x067] SCK pad setting override value.
dataPadSettingOverride(object): [0x068-0x06b] data pad setting override value.value([‘string’, ‘number’], required): [0x068-0x06b] data pad setting override value.
dqsPadSettingOverride(object): [0x06c-0x06f] DQS pad setting override value.value([‘string’, ‘number’], required): [0x06c-0x06f] DQS pad setting override value.
timeoutInMs(object): [0x070-0x073] Timeout threshold for read status command.value([‘string’, ‘number’], required): [0x070-0x073] Timeout threshold for read status command.
commandInterval(object): [0x074-0x077] CS deselect interval between two commands.value([‘string’, ‘number’], required): [0x074-0x077] CS deselect interval between two commands.
dataValidTime_0(object): [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B.bitfields(object, required)time_100ps([‘string’, ‘number’]): Data valid time, in terms of 100ps.delay_cells([‘string’, ‘number’]): Data valid time, in terms of delay cells.
dataValidTime_1(object): [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B.bitfields(object, required)time_100ps([‘string’, ‘number’]): Data valid time, in terms of 100ps.delay_cells([‘string’, ‘number’]): Data valid time, in terms of delay cells.
busyOffset(object): [0x07c-0x07d] Busy offset, valid value: 0-31.value([‘string’, ‘number’], required): [0x07c-0x07d] Busy offset, valid value: 0-31.
busyBitPolarity(object): [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - busy flag is 0 when flash device is busy.value([‘string’, ‘number’], required): [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - busy flag is 0 when flash device is busy.
lookupTable_0(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_1(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_2(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_3(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_4(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_5(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_6(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_7(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_8(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_9(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_10(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_11(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_12(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_13(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_14(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_15(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_16(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_17(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_18(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_19(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_20(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_21(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_22(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_23(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_24(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_25(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_26(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_27(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_28(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_29(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_30(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_31(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_32(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_33(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_34(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_35(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_36(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_37(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_38(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_39(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_40(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_41(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_42(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_43(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_44(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_45(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_46(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_47(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_48(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_49(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_50(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_51(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_52(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_53(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_54(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_55(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_56(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_57(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_58(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_59(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_60(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_61(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_62(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_63(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lutCustomSeq_0(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_1(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_2(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_3(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_4(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_5(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_6(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_7(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_8(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_9(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_10(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_11(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
dll0CrVal(object): [0x1b0-0x1b3] Customizable DLL0CR setting.value([‘string’, ‘number’], required): [0x1b0-0x1b3] Customizable DLL0CR setting.
dll1CrVal(object): [0x1b4-0x1b7] Customizable DLL1CR setting.value([‘string’, ‘number’], required): [0x1b4-0x1b7] Customizable DLL1CR setting.
reserved4_0(object): [0x1b8-0x1bf] Reserved for future use.value([‘string’, ‘number’], required): [0x1b8-0x1bf] Reserved for future use.
reserved4_1(object): [0x1b8-0x1bf] Reserved for future use.value([‘string’, ‘number’], required): [0x1b8-0x1bf] Reserved for future use.
pageSize(object): Page size of Serial NOR.value([‘string’, ‘number’], required): Page size of Serial NOR.
sectorSize(object): Sector size of Serial NOR.value([‘string’, ‘number’], required): Sector size of Serial NOR.
ipcmdSerialClkFreq(object): Clock frequency for IP command.value([‘string’, ‘number’], required): Clock frequency for IP command.
isUniformBlockSize(object): Sector/Block size is the same.value([‘string’, ‘number’], required): Sector/Block size is the same.
isDataOrderSwapped(object): Data order (D0, D1, D2, D3) is swapped (D1,D0, D3, D2).value([‘string’, ‘number’], required): Data order (D0, D1, D2, D3) is swapped (D1,D0, D3, D2).
reserved0_0(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
serialNorType(object): Serial NOR Flash type: 0/1/2/3.value([‘string’, ‘number’], required): Serial NOR Flash type: 0/1/2/3.
needExitNoCmdMode(object): Need to exit NoCmd mode before other IP command.value([‘string’, ‘number’], required): Need to exit NoCmd mode before other IP command.
halfClkForNonReadCmd(object): Half the Serial Clock for non-read command: true/false.value([‘string’, ‘number’], required): Half the Serial Clock for non-read command: true/false.
needRestoreNoCmdMode(object): Need to Restore NoCmd mode after IP commmand execution.value([‘string’, ‘number’], required): Need to Restore NoCmd mode after IP commmand execution.
blockSize(object): Block size.value([‘string’, ‘number’], required): Block size.
flashStateCtx(object): Flash State Context.value([‘string’, ‘number’], required): Flash State Context.
reserve2_0(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_1(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_2(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_3(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_4(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_5(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_6(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_7(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_8(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_9(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
# =========== FCB template for lpc55s3x and flexspi_nor ===========
# ----------------------------------------------------------------------------------------------------
# == FCB template for lpc55s3x and flexspi_nor ==
# ----------------------------------------------------------------------------------------------------
family: CHOOSE_FROM_TABLE # [Required], MCU family name; Possible options:['lpc55s3x', 'rt101x', 'rt102x', 'rt104x', 'rt105x', 'rt106x', 'rt116x', 'rt117x', 'rt118x', 'rt5xx', 'rt6xx', 'rw61x']
revision: a1 # [Optional], Chip silicon revision; If needed this could be used to specify silicon revision of device; Possible options:['latest']
type: flexspi_nor # [Required], Memory type; Specify type of memory used by FCB description; Possible options:['flexspi_nor']
fcb_settings: # [Required], lpc55s3x
tag: # [Optional], tag; [0x000-0x003] Tag, fixed value 0x42464346UL
value: '0x00000000' # [Required], tag; [0x000-0x003] Tag, fixed value 0x42464346UL
version: # [Optional], version; [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix
value: '0x00000000' # [Required], version; [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix
reserved0: # [Optional], reserved0; [0x008-0x00b] Reserved for future use
value: '0x00000000' # [Required], reserved0; [0x008-0x00b] Reserved for future use
readSampleClkSrc: # [Optional], readSampleClkSrc; [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3
value: '0x00' # [Required], readSampleClkSrc; [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3
csHoldTime: # [Optional], csHoldTime; [0x00d-0x00d] CS hold time, default value: 3
value: '0x00' # [Required], csHoldTime; [0x00d-0x00d] CS hold time, default value: 3
csSetupTime: # [Optional], csSetupTime; [0x00e-0x00e] CS setup time, default value: 3
value: '0x00' # [Required], csSetupTime; [0x00e-0x00e] CS setup time, default value: 3
columnAddressWidth: # [Optional], columnAddressWidth; [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For Serial NAND, need to refer to datasheet
value: '0x00' # [Required], columnAddressWidth; [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For Serial NAND, need to refer to datasheet
deviceModeCfgEnable: # [Optional], deviceModeCfgEnable; [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable
value: '0x00' # [Required], deviceModeCfgEnable; [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable
deviceModeType: # [Optional], deviceModeType; [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, Generic configuration, etc.
value: '0x00' # [Required], deviceModeType; [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, Generic configuration, etc.
waitTimeCfgCommands: # [Optional], waitTimeCfgCommands; [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for DPI/QPI/OPI switch or reset command
value: '0x0000' # [Required], waitTimeCfgCommands; [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for DPI/QPI/OPI switch or reset command
deviceModeSeq: # [Optional], deviceModeSeq; [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt sequence number, [31:16] Reserved
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
deviceModeArg: # [Optional], deviceModeArg; [0x018-0x01b] Argument/Parameter for device configuration
value: '0x00000000' # [Required], deviceModeArg; [0x018-0x01b] Argument/Parameter for device configuration
configCmdEnable: # [Optional], configCmdEnable; [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable
value: '0x00' # [Required], configCmdEnable; [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable
configModeType_0: # [Optional], configModeType_0; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
value: '0x00' # [Required], configModeType_0; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
configModeType_1: # [Optional], configModeType_1; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
value: '0x00' # [Required], configModeType_1; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
configModeType_2: # [Optional], configModeType_2; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
value: '0x00' # [Required], configModeType_2; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
configCmdSeqs_0: # [Optional], configCmdSeqs_0; [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
configCmdSeqs_1: # [Optional], configCmdSeqs_1; [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
configCmdSeqs_2: # [Optional], configCmdSeqs_2; [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
reserved1: # [Optional], reserved1; [0x02c-0x02f] Reserved for future use
value: '0x00000000' # [Required], reserved1; [0x02c-0x02f] Reserved for future use
configCmdArgs_0: # [Optional], configCmdArgs_0; [0x030-0x03b] Arguments/Parameters for device Configuration commands
value: '0x00000000' # [Required], configCmdArgs_0; [0x030-0x03b] Arguments/Parameters for device Configuration commands
configCmdArgs_1: # [Optional], configCmdArgs_1; [0x030-0x03b] Arguments/Parameters for device Configuration commands
value: '0x00000000' # [Required], configCmdArgs_1; [0x030-0x03b] Arguments/Parameters for device Configuration commands
configCmdArgs_2: # [Optional], configCmdArgs_2; [0x030-0x03b] Arguments/Parameters for device Configuration commands
value: '0x00000000' # [Required], configCmdArgs_2; [0x030-0x03b] Arguments/Parameters for device Configuration commands
reserved2: # [Optional], reserved2; [0x03c-0x03f] Reserved for future use
value: '0x00000000' # [Required], reserved2; [0x03c-0x03f] Reserved for future use
controllerMiscOption: # [Optional], controllerMiscOption; [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more details
value: '0x00000000' # [Required], controllerMiscOption; [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more details
deviceType: # [Optional], deviceType; [0x044-0x044] Device Type: See Flash Type Definition for more details
value: '0x00' # [Required], deviceType; [0x044-0x044] Device Type: See Flash Type Definition for more details
sflashPadType: # [Optional], sflashPadType; [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
value: '0x00' # [Required], sflashPadType; [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
serialClkFreq: # [Optional], serialClkFreq; [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot Chapter for more details
value: '0x00' # [Required], serialClkFreq; [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot Chapter for more details
lutCustomSeqEnable: # [Optional], lutCustomSeqEnable; [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot be done using 1 LUT sequence, currently, only applicable to HyperFLASH
value: '0x00' # [Required], lutCustomSeqEnable; [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot be done using 1 LUT sequence, currently, only applicable to HyperFLASH
reserved3_0: # [Optional], reserved3_0; [0x048-0x04f] Reserved for future use
value: '0x00000000' # [Required], reserved3_0; [0x048-0x04f] Reserved for future use
reserved3_1: # [Optional], reserved3_1; [0x048-0x04f] Reserved for future use
value: '0x00000000' # [Required], reserved3_1; [0x048-0x04f] Reserved for future use
sflashA1Size: # [Optional], sflashA1Size; [0x050-0x053] Size of Flash connected to A1
value: '0x00000000' # [Required], sflashA1Size; [0x050-0x053] Size of Flash connected to A1
sflashA2Size: # [Optional], sflashA2Size; [0x054-0x057] Size of Flash connected to A2
value: '0x00000000' # [Required], sflashA2Size; [0x054-0x057] Size of Flash connected to A2
sflashB1Size: # [Optional], sflashB1Size; [0x058-0x05b] Size of Flash connected to B1
value: '0x00000000' # [Required], sflashB1Size; [0x058-0x05b] Size of Flash connected to B1
sflashB2Size: # [Optional], sflashB2Size; [0x05c-0x05f] Size of Flash connected to B2
value: '0x00000000' # [Required], sflashB2Size; [0x05c-0x05f] Size of Flash connected to B2
csPadSettingOverride: # [Optional], csPadSettingOverride; [0x060-0x063] CS pad setting override value
value: '0x00000000' # [Required], csPadSettingOverride; [0x060-0x063] CS pad setting override value
sclkPadSettingOverride: # [Optional], sclkPadSettingOverride; [0x064-0x067] SCK pad setting override value
value: '0x00000000' # [Required], sclkPadSettingOverride; [0x064-0x067] SCK pad setting override value
dataPadSettingOverride: # [Optional], dataPadSettingOverride; [0x068-0x06b] data pad setting override value
value: '0x00000000' # [Required], dataPadSettingOverride; [0x068-0x06b] data pad setting override value
dqsPadSettingOverride: # [Optional], dqsPadSettingOverride; [0x06c-0x06f] DQS pad setting override value
value: '0x00000000' # [Required], dqsPadSettingOverride; [0x06c-0x06f] DQS pad setting override value
timeoutInMs: # [Optional], timeoutInMs; [0x070-0x073] Timeout threshold for read status command
value: '0x00000000' # [Required], timeoutInMs; [0x070-0x073] Timeout threshold for read status command
commandInterval: # [Optional], commandInterval; [0x074-0x077] CS deselect interval between two commands
value: '0x00000000' # [Required], commandInterval; [0x074-0x077] CS deselect interval between two commands
dataValidTime_0: # [Optional], dataValidTime_0; [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B
bitfields: # [Required]
time_100ps: 0 # [Optional], time_100ps; Data valid time, in terms of 100ps
delay_cells: 0 # [Optional], delay_cells; Data valid time, in terms of delay cells
dataValidTime_1: # [Optional], dataValidTime_1; [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B
bitfields: # [Required]
time_100ps: 0 # [Optional], time_100ps; Data valid time, in terms of 100ps
delay_cells: 0 # [Optional], delay_cells; Data valid time, in terms of delay cells
busyOffset: # [Optional], busyOffset; [0x07c-0x07d] Busy offset, valid value: 0-31
value: '0x0000' # [Required], busyOffset; [0x07c-0x07d] Busy offset, valid value: 0-31
busyBitPolarity: # [Optional], busyBitPolarity; [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - busy flag is 0 when flash device is busy
value: '0x0000' # [Required], busyBitPolarity; [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - busy flag is 0 when flash device is busy
lookupTable_0: # [Optional], lookupTable_0; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_0; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_1: # [Optional], lookupTable_1; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_1; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_2: # [Optional], lookupTable_2; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_2; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_3: # [Optional], lookupTable_3; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_3; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_4: # [Optional], lookupTable_4; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_4; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_5: # [Optional], lookupTable_5; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_5; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_6: # [Optional], lookupTable_6; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_6; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_7: # [Optional], lookupTable_7; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_7; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_8: # [Optional], lookupTable_8; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_8; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_9: # [Optional], lookupTable_9; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_9; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_10: # [Optional], lookupTable_10; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_10; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_11: # [Optional], lookupTable_11; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_11; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_12: # [Optional], lookupTable_12; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_12; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_13: # [Optional], lookupTable_13; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_13; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_14: # [Optional], lookupTable_14; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_14; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_15: # [Optional], lookupTable_15; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_15; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_16: # [Optional], lookupTable_16; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_16; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_17: # [Optional], lookupTable_17; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_17; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_18: # [Optional], lookupTable_18; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_18; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_19: # [Optional], lookupTable_19; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_19; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_20: # [Optional], lookupTable_20; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_20; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_21: # [Optional], lookupTable_21; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_21; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_22: # [Optional], lookupTable_22; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_22; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_23: # [Optional], lookupTable_23; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_23; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_24: # [Optional], lookupTable_24; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_24; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_25: # [Optional], lookupTable_25; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_25; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_26: # [Optional], lookupTable_26; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_26; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_27: # [Optional], lookupTable_27; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_27; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_28: # [Optional], lookupTable_28; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_28; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_29: # [Optional], lookupTable_29; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_29; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_30: # [Optional], lookupTable_30; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_30; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_31: # [Optional], lookupTable_31; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_31; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_32: # [Optional], lookupTable_32; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_32; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_33: # [Optional], lookupTable_33; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_33; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_34: # [Optional], lookupTable_34; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_34; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_35: # [Optional], lookupTable_35; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_35; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_36: # [Optional], lookupTable_36; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_36; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_37: # [Optional], lookupTable_37; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_37; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_38: # [Optional], lookupTable_38; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_38; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_39: # [Optional], lookupTable_39; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_39; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_40: # [Optional], lookupTable_40; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_40; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_41: # [Optional], lookupTable_41; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_41; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_42: # [Optional], lookupTable_42; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_42; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_43: # [Optional], lookupTable_43; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_43; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_44: # [Optional], lookupTable_44; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_44; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_45: # [Optional], lookupTable_45; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_45; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_46: # [Optional], lookupTable_46; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_46; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_47: # [Optional], lookupTable_47; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_47; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_48: # [Optional], lookupTable_48; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_48; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_49: # [Optional], lookupTable_49; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_49; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_50: # [Optional], lookupTable_50; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_50; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_51: # [Optional], lookupTable_51; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_51; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_52: # [Optional], lookupTable_52; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_52; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_53: # [Optional], lookupTable_53; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_53; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_54: # [Optional], lookupTable_54; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_54; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_55: # [Optional], lookupTable_55; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_55; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_56: # [Optional], lookupTable_56; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_56; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_57: # [Optional], lookupTable_57; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_57; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_58: # [Optional], lookupTable_58; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_58; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_59: # [Optional], lookupTable_59; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_59; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_60: # [Optional], lookupTable_60; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_60; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_61: # [Optional], lookupTable_61; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_61; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_62: # [Optional], lookupTable_62; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_62; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_63: # [Optional], lookupTable_63; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_63; [0x080-0x17f] Lookup table holds Flash command sequences
lutCustomSeq_0: # [Optional], lutCustomSeq_0; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_1: # [Optional], lutCustomSeq_1; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_2: # [Optional], lutCustomSeq_2; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_3: # [Optional], lutCustomSeq_3; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_4: # [Optional], lutCustomSeq_4; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_5: # [Optional], lutCustomSeq_5; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_6: # [Optional], lutCustomSeq_6; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_7: # [Optional], lutCustomSeq_7; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_8: # [Optional], lutCustomSeq_8; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_9: # [Optional], lutCustomSeq_9; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_10: # [Optional], lutCustomSeq_10; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_11: # [Optional], lutCustomSeq_11; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
dll0CrVal: # [Optional], dll0CrVal; [0x1b0-0x1b3] Customizable DLL0CR setting
value: '0x00000000' # [Required], dll0CrVal; [0x1b0-0x1b3] Customizable DLL0CR setting
dll1CrVal: # [Optional], dll1CrVal; [0x1b4-0x1b7] Customizable DLL1CR setting
value: '0x00000000' # [Required], dll1CrVal; [0x1b4-0x1b7] Customizable DLL1CR setting
reserved4_0: # [Optional], reserved4_0; [0x1b8-0x1bf] Reserved for future use
value: '0x00000000' # [Required], reserved4_0; [0x1b8-0x1bf] Reserved for future use
reserved4_1: # [Optional], reserved4_1; [0x1b8-0x1bf] Reserved for future use
value: '0x00000000' # [Required], reserved4_1; [0x1b8-0x1bf] Reserved for future use
pageSize: # [Optional], pageSize; Page size of Serial NOR
value: '0x00000000' # [Required], pageSize; Page size of Serial NOR
sectorSize: # [Optional], sectorSize; Sector size of Serial NOR
value: '0x00000000' # [Required], sectorSize; Sector size of Serial NOR
ipcmdSerialClkFreq: # [Optional], ipcmdSerialClkFreq; Clock frequency for IP command
value: '0x00' # [Required], ipcmdSerialClkFreq; Clock frequency for IP command
isUniformBlockSize: # [Optional], isUniformBlockSize; Sector/Block size is the same
value: '0x00' # [Required], isUniformBlockSize; Sector/Block size is the same
isDataOrderSwapped: # [Optional], isDataOrderSwapped; Data order (D0, D1, D2, D3) is swapped (D1,D0, D3, D2)
value: '0x00' # [Required], isDataOrderSwapped; Data order (D0, D1, D2, D3) is swapped (D1,D0, D3, D2)
reserved0_0: # [Optional], reserved0_0; Reserved for future use
value: '0x00' # [Required], reserved0_0; Reserved for future use
serialNorType: # [Optional], serialNorType; Serial NOR Flash type: 0/1/2/3
value: '0x00' # [Required], serialNorType; Serial NOR Flash type: 0/1/2/3
needExitNoCmdMode: # [Optional], needExitNoCmdMode; Need to exit NoCmd mode before other IP command
value: '0x00' # [Required], needExitNoCmdMode; Need to exit NoCmd mode before other IP command
halfClkForNonReadCmd: # [Optional], halfClkForNonReadCmd; Half the Serial Clock for non-read command: true/false
value: '0x00' # [Required], halfClkForNonReadCmd; Half the Serial Clock for non-read command: true/false
needRestoreNoCmdMode: # [Optional], needRestoreNoCmdMode; Need to Restore NoCmd mode after IP commmand execution
value: '0x00' # [Required], needRestoreNoCmdMode; Need to Restore NoCmd mode after IP commmand execution
blockSize: # [Optional], blockSize; Block size
value: '0x00000000' # [Required], blockSize; Block size
flashStateCtx: # [Optional], flashStateCtx; Flash State Context
value: '0x00000000' # [Required], flashStateCtx; Flash State Context
reserve2_0: # [Optional], reserve2_0; Reserved for future use
value: '0x00000000' # [Required], reserve2_0; Reserved for future use
reserve2_1: # [Optional], reserve2_1; Reserved for future use
value: '0x00000000' # [Required], reserve2_1; Reserved for future use
reserve2_2: # [Optional], reserve2_2; Reserved for future use
value: '0x00000000' # [Required], reserve2_2; Reserved for future use
reserve2_3: # [Optional], reserve2_3; Reserved for future use
value: '0x00000000' # [Required], reserve2_3; Reserved for future use
reserve2_4: # [Optional], reserve2_4; Reserved for future use
value: '0x00000000' # [Required], reserve2_4; Reserved for future use
reserve2_5: # [Optional], reserve2_5; Reserved for future use
value: '0x00000000' # [Required], reserve2_5; Reserved for future use
reserve2_6: # [Optional], reserve2_6; Reserved for future use
value: '0x00000000' # [Required], reserve2_6; Reserved for future use
reserve2_7: # [Optional], reserve2_7; Reserved for future use
value: '0x00000000' # [Required], reserve2_7; Reserved for future use
reserve2_8: # [Optional], reserve2_8; Reserved for future use
value: '0x00000000' # [Required], reserve2_8; Reserved for future use
reserve2_9: # [Optional], reserve2_9; Reserved for future use
value: '0x00000000' # [Required], reserve2_9; Reserved for future use
FCB template for rt101x and flexspi_nor
family(string): MCU family name. Must be one of:["lpc55s3x", "rt101x", "rt102x", "rt104x", "rt105x", "rt106x", "rt116x", "rt117x", "rt118x", "rt5xx", "rt6xx", "rw61x"].revision(string): If needed this could be used to specify silicon revision of device. Must be one of:["latest"].type(string): Specify type of memory used by FCB description. Must be one of:["flexspi_nor"].fcb_settings(object)tag(object): [0x000-0x003] Tag, fixed value 0x42464346UL.value([‘string’, ‘number’], required): [0x000-0x003] Tag, fixed value 0x42464346UL.
version(object): [0x004-0x007] Version,[31:24] -‘V’, [23:16] - Major, [15:8] - Minor, [7:0] - bugfix.value([‘string’, ‘number’], required): [0x004-0x007] Version,[31:24] -‘V’, [23:16] - Major, [15:8] - Minor, [7:0] - bugfix.
reserved0(object): [0x008-0x00b] Reserved for future use.value([‘string’, ‘number’], required): [0x008-0x00b] Reserved for future use.
readSampleClkSrc(object): [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3.value([‘string’, ‘number’], required): [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3.
csHoldTime(object): [0x00d-0x00d] CS hold time, default value: 3.value([‘string’, ‘number’], required): [0x00d-0x00d] CS hold time, default value: 3.
csSetupTime(object): [0x00e-0x00e] CS setup time, default value: 3.value([‘string’, ‘number’], required): [0x00e-0x00e] CS setup time, default value: 3.
columnAddressWidth(object): [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For Serial NAND, need to refer to datasheet.value([‘string’, ‘number’], required): [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For Serial NAND, need to refer to datasheet.
deviceModeCfgEnable(object): [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable.value([‘string’, ‘number’], required): [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable.
deviceModeType(object): [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, Generic configuration, etc.value([‘string’, ‘number’], required): [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, Generic configuration, etc.
waitTimeCfgCommands(object): [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for DPI/QPI/OPI switch or reset command.value([‘string’, ‘number’], required): [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for DPI/QPI/OPI switch or reset command.
deviceModeSeq(object): [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt sequence number, [31:16] Reserved.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
deviceModeArg(object): [0x018-0x01b] Argument/Parameter for device configuration.value([‘string’, ‘number’], required): [0x018-0x01b] Argument/Parameter for device configuration.
configCmdEnable(object): [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable.value([‘string’, ‘number’], required): [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable.
configModeType_0(object): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe.value([‘string’, ‘number’], required): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe.
configModeType_1(object): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe.value([‘string’, ‘number’], required): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe.
configModeType_2(object): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe.value([‘string’, ‘number’], required): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe.
configCmdSeqs_0(object): [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
configCmdSeqs_1(object): [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
configCmdSeqs_2(object): [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
reserved1(object): [0x02c-0x02f] Reserved for future use.value([‘string’, ‘number’], required): [0x02c-0x02f] Reserved for future use.
configCmdArgs_0(object): [0x030-0x03b] Arguments/Parameters for device Configuration commands.value([‘string’, ‘number’], required): [0x030-0x03b] Arguments/Parameters for device Configuration commands.
configCmdArgs_1(object): [0x030-0x03b] Arguments/Parameters for device Configuration commands.value([‘string’, ‘number’], required): [0x030-0x03b] Arguments/Parameters for device Configuration commands.
configCmdArgs_2(object): [0x030-0x03b] Arguments/Parameters for device Configuration commands.value([‘string’, ‘number’], required): [0x030-0x03b] Arguments/Parameters for device Configuration commands.
reserved2(object): [0x03c-0x03f] Reserved for future use.value([‘string’, ‘number’], required): [0x03c-0x03f] Reserved for future use.
controllerMiscOption(object): [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more details.value([‘string’, ‘number’], required): [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more details.
deviceType(object): [0x044-0x044] Device Type: See Flash Type Definition for more details.value([‘string’, ‘number’], required): [0x044-0x044] Device Type: See Flash Type Definition for more details.
sflashPadType(object): [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal.value([‘string’, ‘number’], required): [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal.
serialClkFreq(object): [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot Chapter for more details.value([‘string’, ‘number’], required): [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot Chapter for more details.
lutCustomSeqEnable(object): [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot be done using 1 LUT sequence, currently, only applicable to HyperFLASH.value([‘string’, ‘number’], required): [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot be done using 1 LUT sequence, currently, only applicable to HyperFLASH.
reserved3_0(object): [0x048-0x04f] Reserved for future use.value([‘string’, ‘number’], required): [0x048-0x04f] Reserved for future use.
reserved3_1(object): [0x048-0x04f] Reserved for future use.value([‘string’, ‘number’], required): [0x048-0x04f] Reserved for future use.
sflashA1Size(object): [0x050-0x053] Size of Flash connected to A1.value([‘string’, ‘number’], required): [0x050-0x053] Size of Flash connected to A1.
sflashA2Size(object): [0x054-0x057] Size of Flash connected to A2.value([‘string’, ‘number’], required): [0x054-0x057] Size of Flash connected to A2.
sflashB1Size(object): [0x058-0x05b] Size of Flash connected to B1.value([‘string’, ‘number’], required): [0x058-0x05b] Size of Flash connected to B1.
sflashB2Size(object): [0x05c-0x05f] Size of Flash connected to B2.value([‘string’, ‘number’], required): [0x05c-0x05f] Size of Flash connected to B2.
csPadSettingOverride(object): [0x060-0x063] CS pad setting override value.value([‘string’, ‘number’], required): [0x060-0x063] CS pad setting override value.
sclkPadSettingOverride(object): [0x064-0x067] SCK pad setting override value.value([‘string’, ‘number’], required): [0x064-0x067] SCK pad setting override value.
dataPadSettingOverride(object): [0x068-0x06b] data pad setting override value.value([‘string’, ‘number’], required): [0x068-0x06b] data pad setting override value.
dqsPadSettingOverride(object): [0x06c-0x06f] DQS pad setting override value.value([‘string’, ‘number’], required): [0x06c-0x06f] DQS pad setting override value.
timeoutInMs(object): [0x070-0x073] Timeout threshold for read status command.value([‘string’, ‘number’], required): [0x070-0x073] Timeout threshold for read status command.
commandInterval(object): [0x074-0x077] CS deselect interval between two commands.value([‘string’, ‘number’], required): [0x074-0x077] CS deselect interval between two commands.
dataValidTime_0(object): [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns.value([‘string’, ‘number’], required): [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns.
dataValidTime_1(object): [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns.value([‘string’, ‘number’], required): [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns.
busyOffset(object): [0x07c-0x07d] Busy offset, valid value: 0-31.value([‘string’, ‘number’], required): [0x07c-0x07d] Busy offset, valid value: 0-31.
busyBitPolarity(object): [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - busy flag is 0 when flash device is busy.value([‘string’, ‘number’], required): [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - busy flag is 0 when flash device is busy.
lookupTable_0(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_1(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_2(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_3(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_4(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_5(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_6(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_7(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_8(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_9(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_10(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_11(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_12(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_13(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_14(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_15(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_16(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_17(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_18(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_19(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_20(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_21(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_22(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_23(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_24(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_25(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_26(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_27(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_28(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_29(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_30(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_31(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_32(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_33(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_34(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_35(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_36(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_37(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_38(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_39(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_40(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_41(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_42(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_43(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_44(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_45(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_46(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_47(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_48(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_49(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_50(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_51(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_52(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_53(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_54(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_55(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_56(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_57(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_58(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_59(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_60(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_61(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_62(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_63(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lutCustomSeq_0(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_1(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_2(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_3(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_4(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_5(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_6(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_7(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_8(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_9(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_10(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_11(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
reserved4_0(object): [0x1b0-0x1bf] Reserved for future use.value([‘string’, ‘number’], required): [0x1b0-0x1bf] Reserved for future use.
reserved4_1(object): [0x1b0-0x1bf] Reserved for future use.value([‘string’, ‘number’], required): [0x1b0-0x1bf] Reserved for future use.
reserved4_2(object): [0x1b0-0x1bf] Reserved for future use.value([‘string’, ‘number’], required): [0x1b0-0x1bf] Reserved for future use.
reserved4_3(object): [0x1b0-0x1bf] Reserved for future use.value([‘string’, ‘number’], required): [0x1b0-0x1bf] Reserved for future use.
pageSize(object): Page size of Serial NOR.value([‘string’, ‘number’], required): Page size of Serial NOR.
sectorSize(object): Sector size of Serial NOR.value([‘string’, ‘number’], required): Sector size of Serial NOR.
ipcmdSerialClkFreq(object): Clock frequency for IP command.value([‘string’, ‘number’], required): Clock frequency for IP command.
isUniformBlockSize(object): Sector/Block size is the same.value([‘string’, ‘number’], required): Sector/Block size is the same.
reserved0_0(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserved0_1(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
serialNorType(object): Serial NOR Flash type: 0/1/2/3.value([‘string’, ‘number’], required): Serial NOR Flash type: 0/1/2/3.
needExitNoCmdMode(object): Need to exit NoCmd mode before other IP command.value([‘string’, ‘number’], required): Need to exit NoCmd mode before other IP command.
halfClkForNonReadCmd(object): Half the Serial Clock for non-read command: true/false.value([‘string’, ‘number’], required): Half the Serial Clock for non-read command: true/false.
needRestoreNoCmdMode(object): Need to Restore NoCmd mode after IP commmand execution.value([‘string’, ‘number’], required): Need to Restore NoCmd mode after IP commmand execution.
blockSize(object): Block size.value([‘string’, ‘number’], required): Block size.
reserve2_0(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_1(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_2(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_3(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_4(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_5(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_6(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_7(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_8(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_9(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_10(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
# =========== FCB template for rt101x and flexspi_nor ===========
# ----------------------------------------------------------------------------------------------------
# == FCB template for rt101x and flexspi_nor ==
# ----------------------------------------------------------------------------------------------------
family: CHOOSE_FROM_TABLE # [Required], MCU family name; Possible options:['lpc55s3x', 'rt101x', 'rt102x', 'rt104x', 'rt105x', 'rt106x', 'rt116x', 'rt117x', 'rt118x', 'rt5xx', 'rt6xx', 'rw61x']
revision: a1 # [Optional], Chip silicon revision; If needed this could be used to specify silicon revision of device; Possible options:['latest']
type: flexspi_nor # [Required], Memory type; Specify type of memory used by FCB description; Possible options:['flexspi_nor']
fcb_settings: # [Required], rt101x
tag: # [Optional], tag; [0x000-0x003] Tag, fixed value 0x42464346UL
value: '0x00000000' # [Required], tag; [0x000-0x003] Tag, fixed value 0x42464346UL
version: # [Optional], version; [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix
value: '0x00000000' # [Required], version; [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix
reserved0: # [Optional], reserved0; [0x008-0x00b] Reserved for future use
value: '0x00000000' # [Required], reserved0; [0x008-0x00b] Reserved for future use
readSampleClkSrc: # [Optional], readSampleClkSrc; [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3
value: '0x00' # [Required], readSampleClkSrc; [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3
csHoldTime: # [Optional], csHoldTime; [0x00d-0x00d] CS hold time, default value: 3
value: '0x00' # [Required], csHoldTime; [0x00d-0x00d] CS hold time, default value: 3
csSetupTime: # [Optional], csSetupTime; [0x00e-0x00e] CS setup time, default value: 3
value: '0x00' # [Required], csSetupTime; [0x00e-0x00e] CS setup time, default value: 3
columnAddressWidth: # [Optional], columnAddressWidth; [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For Serial NAND, need to refer to datasheet
value: '0x00' # [Required], columnAddressWidth; [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For Serial NAND, need to refer to datasheet
deviceModeCfgEnable: # [Optional], deviceModeCfgEnable; [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable
value: '0x00' # [Required], deviceModeCfgEnable; [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable
deviceModeType: # [Optional], deviceModeType; [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, Generic configuration, etc.
value: '0x00' # [Required], deviceModeType; [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, Generic configuration, etc.
waitTimeCfgCommands: # [Optional], waitTimeCfgCommands; [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for DPI/QPI/OPI switch or reset command
value: '0x0000' # [Required], waitTimeCfgCommands; [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for DPI/QPI/OPI switch or reset command
deviceModeSeq: # [Optional], deviceModeSeq; [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt sequence number, [31:16] Reserved
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
deviceModeArg: # [Optional], deviceModeArg; [0x018-0x01b] Argument/Parameter for device configuration
value: '0x00000000' # [Required], deviceModeArg; [0x018-0x01b] Argument/Parameter for device configuration
configCmdEnable: # [Optional], configCmdEnable; [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable
value: '0x00' # [Required], configCmdEnable; [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable
configModeType_0: # [Optional], configModeType_0; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
value: '0x00' # [Required], configModeType_0; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
configModeType_1: # [Optional], configModeType_1; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
value: '0x00' # [Required], configModeType_1; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
configModeType_2: # [Optional], configModeType_2; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
value: '0x00' # [Required], configModeType_2; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
configCmdSeqs_0: # [Optional], configCmdSeqs_0; [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
configCmdSeqs_1: # [Optional], configCmdSeqs_1; [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
configCmdSeqs_2: # [Optional], configCmdSeqs_2; [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
reserved1: # [Optional], reserved1; [0x02c-0x02f] Reserved for future use
value: '0x00000000' # [Required], reserved1; [0x02c-0x02f] Reserved for future use
configCmdArgs_0: # [Optional], configCmdArgs_0; [0x030-0x03b] Arguments/Parameters for device Configuration commands
value: '0x00000000' # [Required], configCmdArgs_0; [0x030-0x03b] Arguments/Parameters for device Configuration commands
configCmdArgs_1: # [Optional], configCmdArgs_1; [0x030-0x03b] Arguments/Parameters for device Configuration commands
value: '0x00000000' # [Required], configCmdArgs_1; [0x030-0x03b] Arguments/Parameters for device Configuration commands
configCmdArgs_2: # [Optional], configCmdArgs_2; [0x030-0x03b] Arguments/Parameters for device Configuration commands
value: '0x00000000' # [Required], configCmdArgs_2; [0x030-0x03b] Arguments/Parameters for device Configuration commands
reserved2: # [Optional], reserved2; [0x03c-0x03f] Reserved for future use
value: '0x00000000' # [Required], reserved2; [0x03c-0x03f] Reserved for future use
controllerMiscOption: # [Optional], controllerMiscOption; [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more details
value: '0x00000000' # [Required], controllerMiscOption; [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more details
deviceType: # [Optional], deviceType; [0x044-0x044] Device Type: See Flash Type Definition for more details
value: '0x00' # [Required], deviceType; [0x044-0x044] Device Type: See Flash Type Definition for more details
sflashPadType: # [Optional], sflashPadType; [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
value: '0x00' # [Required], sflashPadType; [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
serialClkFreq: # [Optional], serialClkFreq; [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot Chapter for more details
value: '0x00' # [Required], serialClkFreq; [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot Chapter for more details
lutCustomSeqEnable: # [Optional], lutCustomSeqEnable; [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot be done using 1 LUT sequence, currently, only applicable to HyperFLASH
value: '0x00' # [Required], lutCustomSeqEnable; [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot be done using 1 LUT sequence, currently, only applicable to HyperFLASH
reserved3_0: # [Optional], reserved3_0; [0x048-0x04f] Reserved for future use
value: '0x00000000' # [Required], reserved3_0; [0x048-0x04f] Reserved for future use
reserved3_1: # [Optional], reserved3_1; [0x048-0x04f] Reserved for future use
value: '0x00000000' # [Required], reserved3_1; [0x048-0x04f] Reserved for future use
sflashA1Size: # [Optional], sflashA1Size; [0x050-0x053] Size of Flash connected to A1
value: '0x00000000' # [Required], sflashA1Size; [0x050-0x053] Size of Flash connected to A1
sflashA2Size: # [Optional], sflashA2Size; [0x054-0x057] Size of Flash connected to A2
value: '0x00000000' # [Required], sflashA2Size; [0x054-0x057] Size of Flash connected to A2
sflashB1Size: # [Optional], sflashB1Size; [0x058-0x05b] Size of Flash connected to B1
value: '0x00000000' # [Required], sflashB1Size; [0x058-0x05b] Size of Flash connected to B1
sflashB2Size: # [Optional], sflashB2Size; [0x05c-0x05f] Size of Flash connected to B2
value: '0x00000000' # [Required], sflashB2Size; [0x05c-0x05f] Size of Flash connected to B2
csPadSettingOverride: # [Optional], csPadSettingOverride; [0x060-0x063] CS pad setting override value
value: '0x00000000' # [Required], csPadSettingOverride; [0x060-0x063] CS pad setting override value
sclkPadSettingOverride: # [Optional], sclkPadSettingOverride; [0x064-0x067] SCK pad setting override value
value: '0x00000000' # [Required], sclkPadSettingOverride; [0x064-0x067] SCK pad setting override value
dataPadSettingOverride: # [Optional], dataPadSettingOverride; [0x068-0x06b] data pad setting override value
value: '0x00000000' # [Required], dataPadSettingOverride; [0x068-0x06b] data pad setting override value
dqsPadSettingOverride: # [Optional], dqsPadSettingOverride; [0x06c-0x06f] DQS pad setting override value
value: '0x00000000' # [Required], dqsPadSettingOverride; [0x06c-0x06f] DQS pad setting override value
timeoutInMs: # [Optional], timeoutInMs; [0x070-0x073] Timeout threshold for read status command
value: '0x00000000' # [Required], timeoutInMs; [0x070-0x073] Timeout threshold for read status command
commandInterval: # [Optional], commandInterval; [0x074-0x077] CS deselect interval between two commands
value: '0x00000000' # [Required], commandInterval; [0x074-0x077] CS deselect interval between two commands
dataValidTime_0: # [Optional], dataValidTime_0; [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
value: '0x0000' # [Required], dataValidTime_0; [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
dataValidTime_1: # [Optional], dataValidTime_1; [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
value: '0x0000' # [Required], dataValidTime_1; [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
busyOffset: # [Optional], busyOffset; [0x07c-0x07d] Busy offset, valid value: 0-31
value: '0x0000' # [Required], busyOffset; [0x07c-0x07d] Busy offset, valid value: 0-31
busyBitPolarity: # [Optional], busyBitPolarity; [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - busy flag is 0 when flash device is busy
value: '0x0000' # [Required], busyBitPolarity; [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - busy flag is 0 when flash device is busy
lookupTable_0: # [Optional], lookupTable_0; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_0; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_1: # [Optional], lookupTable_1; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_1; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_2: # [Optional], lookupTable_2; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_2; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_3: # [Optional], lookupTable_3; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_3; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_4: # [Optional], lookupTable_4; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_4; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_5: # [Optional], lookupTable_5; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_5; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_6: # [Optional], lookupTable_6; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_6; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_7: # [Optional], lookupTable_7; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_7; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_8: # [Optional], lookupTable_8; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_8; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_9: # [Optional], lookupTable_9; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_9; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_10: # [Optional], lookupTable_10; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_10; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_11: # [Optional], lookupTable_11; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_11; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_12: # [Optional], lookupTable_12; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_12; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_13: # [Optional], lookupTable_13; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_13; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_14: # [Optional], lookupTable_14; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_14; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_15: # [Optional], lookupTable_15; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_15; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_16: # [Optional], lookupTable_16; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_16; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_17: # [Optional], lookupTable_17; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_17; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_18: # [Optional], lookupTable_18; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_18; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_19: # [Optional], lookupTable_19; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_19; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_20: # [Optional], lookupTable_20; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_20; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_21: # [Optional], lookupTable_21; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_21; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_22: # [Optional], lookupTable_22; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_22; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_23: # [Optional], lookupTable_23; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_23; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_24: # [Optional], lookupTable_24; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_24; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_25: # [Optional], lookupTable_25; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_25; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_26: # [Optional], lookupTable_26; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_26; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_27: # [Optional], lookupTable_27; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_27; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_28: # [Optional], lookupTable_28; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_28; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_29: # [Optional], lookupTable_29; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_29; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_30: # [Optional], lookupTable_30; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_30; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_31: # [Optional], lookupTable_31; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_31; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_32: # [Optional], lookupTable_32; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_32; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_33: # [Optional], lookupTable_33; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_33; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_34: # [Optional], lookupTable_34; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_34; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_35: # [Optional], lookupTable_35; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_35; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_36: # [Optional], lookupTable_36; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_36; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_37: # [Optional], lookupTable_37; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_37; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_38: # [Optional], lookupTable_38; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_38; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_39: # [Optional], lookupTable_39; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_39; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_40: # [Optional], lookupTable_40; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_40; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_41: # [Optional], lookupTable_41; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_41; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_42: # [Optional], lookupTable_42; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_42; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_43: # [Optional], lookupTable_43; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_43; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_44: # [Optional], lookupTable_44; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_44; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_45: # [Optional], lookupTable_45; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_45; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_46: # [Optional], lookupTable_46; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_46; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_47: # [Optional], lookupTable_47; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_47; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_48: # [Optional], lookupTable_48; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_48; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_49: # [Optional], lookupTable_49; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_49; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_50: # [Optional], lookupTable_50; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_50; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_51: # [Optional], lookupTable_51; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_51; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_52: # [Optional], lookupTable_52; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_52; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_53: # [Optional], lookupTable_53; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_53; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_54: # [Optional], lookupTable_54; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_54; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_55: # [Optional], lookupTable_55; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_55; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_56: # [Optional], lookupTable_56; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_56; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_57: # [Optional], lookupTable_57; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_57; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_58: # [Optional], lookupTable_58; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_58; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_59: # [Optional], lookupTable_59; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_59; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_60: # [Optional], lookupTable_60; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_60; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_61: # [Optional], lookupTable_61; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_61; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_62: # [Optional], lookupTable_62; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_62; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_63: # [Optional], lookupTable_63; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_63; [0x080-0x17f] Lookup table holds Flash command sequences
lutCustomSeq_0: # [Optional], lutCustomSeq_0; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_1: # [Optional], lutCustomSeq_1; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_2: # [Optional], lutCustomSeq_2; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_3: # [Optional], lutCustomSeq_3; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_4: # [Optional], lutCustomSeq_4; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_5: # [Optional], lutCustomSeq_5; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_6: # [Optional], lutCustomSeq_6; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_7: # [Optional], lutCustomSeq_7; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_8: # [Optional], lutCustomSeq_8; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_9: # [Optional], lutCustomSeq_9; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_10: # [Optional], lutCustomSeq_10; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_11: # [Optional], lutCustomSeq_11; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
reserved4_0: # [Optional], reserved4_0; [0x1b0-0x1bf] Reserved for future use
value: '0x00000000' # [Required], reserved4_0; [0x1b0-0x1bf] Reserved for future use
reserved4_1: # [Optional], reserved4_1; [0x1b0-0x1bf] Reserved for future use
value: '0x00000000' # [Required], reserved4_1; [0x1b0-0x1bf] Reserved for future use
reserved4_2: # [Optional], reserved4_2; [0x1b0-0x1bf] Reserved for future use
value: '0x00000000' # [Required], reserved4_2; [0x1b0-0x1bf] Reserved for future use
reserved4_3: # [Optional], reserved4_3; [0x1b0-0x1bf] Reserved for future use
value: '0x00000000' # [Required], reserved4_3; [0x1b0-0x1bf] Reserved for future use
pageSize: # [Optional], pageSize; Page size of Serial NOR
value: '0x00000000' # [Required], pageSize; Page size of Serial NOR
sectorSize: # [Optional], sectorSize; Sector size of Serial NOR
value: '0x00000000' # [Required], sectorSize; Sector size of Serial NOR
ipcmdSerialClkFreq: # [Optional], ipcmdSerialClkFreq; Clock frequency for IP command
value: '0x00' # [Required], ipcmdSerialClkFreq; Clock frequency for IP command
isUniformBlockSize: # [Optional], isUniformBlockSize; Sector/Block size is the same
value: '0x00' # [Required], isUniformBlockSize; Sector/Block size is the same
reserved0_0: # [Optional], reserved0_0; Reserved for future use
value: '0x00' # [Required], reserved0_0; Reserved for future use
reserved0_1: # [Optional], reserved0_1; Reserved for future use
value: '0x00' # [Required], reserved0_1; Reserved for future use
serialNorType: # [Optional], serialNorType; Serial NOR Flash type: 0/1/2/3
value: '0x00' # [Required], serialNorType; Serial NOR Flash type: 0/1/2/3
needExitNoCmdMode: # [Optional], needExitNoCmdMode; Need to exit NoCmd mode before other IP command
value: '0x00' # [Required], needExitNoCmdMode; Need to exit NoCmd mode before other IP command
halfClkForNonReadCmd: # [Optional], halfClkForNonReadCmd; Half the Serial Clock for non-read command: true/false
value: '0x00' # [Required], halfClkForNonReadCmd; Half the Serial Clock for non-read command: true/false
needRestoreNoCmdMode: # [Optional], needRestoreNoCmdMode; Need to Restore NoCmd mode after IP commmand execution
value: '0x00' # [Required], needRestoreNoCmdMode; Need to Restore NoCmd mode after IP commmand execution
blockSize: # [Optional], blockSize; Block size
value: '0x00000000' # [Required], blockSize; Block size
reserve2_0: # [Optional], reserve2_0; Reserved for future use
value: '0x00000000' # [Required], reserve2_0; Reserved for future use
reserve2_1: # [Optional], reserve2_1; Reserved for future use
value: '0x00000000' # [Required], reserve2_1; Reserved for future use
reserve2_2: # [Optional], reserve2_2; Reserved for future use
value: '0x00000000' # [Required], reserve2_2; Reserved for future use
reserve2_3: # [Optional], reserve2_3; Reserved for future use
value: '0x00000000' # [Required], reserve2_3; Reserved for future use
reserve2_4: # [Optional], reserve2_4; Reserved for future use
value: '0x00000000' # [Required], reserve2_4; Reserved for future use
reserve2_5: # [Optional], reserve2_5; Reserved for future use
value: '0x00000000' # [Required], reserve2_5; Reserved for future use
reserve2_6: # [Optional], reserve2_6; Reserved for future use
value: '0x00000000' # [Required], reserve2_6; Reserved for future use
reserve2_7: # [Optional], reserve2_7; Reserved for future use
value: '0x00000000' # [Required], reserve2_7; Reserved for future use
reserve2_8: # [Optional], reserve2_8; Reserved for future use
value: '0x00000000' # [Required], reserve2_8; Reserved for future use
reserve2_9: # [Optional], reserve2_9; Reserved for future use
value: '0x00000000' # [Required], reserve2_9; Reserved for future use
reserve2_10: # [Optional], reserve2_10; Reserved for future use
value: '0x00000000' # [Required], reserve2_10; Reserved for future use
FCB template for rt102x and flexspi_nor
family(string): MCU family name. Must be one of:["lpc55s3x", "rt101x", "rt102x", "rt104x", "rt105x", "rt106x", "rt116x", "rt117x", "rt118x", "rt5xx", "rt6xx", "rw61x"].revision(string): If needed this could be used to specify silicon revision of device. Must be one of:["latest"].type(string): Specify type of memory used by FCB description. Must be one of:["flexspi_nor"].fcb_settings(object)tag(object): [0x000-0x003] Tag, fixed value 0x42464346UL.value([‘string’, ‘number’], required): [0x000-0x003] Tag, fixed value 0x42464346UL.
version(object): [0x004-0x007] Version,[31:24] -‘V’, [23:16] - Major, [15:8] - Minor, [7:0] - bugfix.value([‘string’, ‘number’], required): [0x004-0x007] Version,[31:24] -‘V’, [23:16] - Major, [15:8] - Minor, [7:0] - bugfix.
reserved0(object): [0x008-0x00b] Reserved for future use.value([‘string’, ‘number’], required): [0x008-0x00b] Reserved for future use.
readSampleClkSrc(object): [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3.value([‘string’, ‘number’], required): [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3.
csHoldTime(object): [0x00d-0x00d] CS hold time, default value: 3.value([‘string’, ‘number’], required): [0x00d-0x00d] CS hold time, default value: 3.
csSetupTime(object): [0x00e-0x00e] CS setup time, default value: 3.value([‘string’, ‘number’], required): [0x00e-0x00e] CS setup time, default value: 3.
columnAddressWidth(object): [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For Serial NAND, need to refer to datasheet.value([‘string’, ‘number’], required): [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For Serial NAND, need to refer to datasheet.
deviceModeCfgEnable(object): [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable.value([‘string’, ‘number’], required): [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable.
deviceModeType(object): [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, Generic configuration, etc.value([‘string’, ‘number’], required): [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, Generic configuration, etc.
waitTimeCfgCommands(object): [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for DPI/QPI/OPI switch or reset command.value([‘string’, ‘number’], required): [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for DPI/QPI/OPI switch or reset command.
deviceModeSeq(object): [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt sequence number, [31:16] Reserved.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
deviceModeArg(object): [0x018-0x01b] Argument/Parameter for device configuration.value([‘string’, ‘number’], required): [0x018-0x01b] Argument/Parameter for device configuration.
configCmdEnable(object): [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable.value([‘string’, ‘number’], required): [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable.
configModeType_0(object): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe.value([‘string’, ‘number’], required): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe.
configModeType_1(object): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe.value([‘string’, ‘number’], required): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe.
configModeType_2(object): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe.value([‘string’, ‘number’], required): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe.
configCmdSeqs_0(object): [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
configCmdSeqs_1(object): [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
configCmdSeqs_2(object): [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
reserved1(object): [0x02c-0x02f] Reserved for future use.value([‘string’, ‘number’], required): [0x02c-0x02f] Reserved for future use.
configCmdArgs_0(object): [0x030-0x03b] Arguments/Parameters for device Configuration commands.value([‘string’, ‘number’], required): [0x030-0x03b] Arguments/Parameters for device Configuration commands.
configCmdArgs_1(object): [0x030-0x03b] Arguments/Parameters for device Configuration commands.value([‘string’, ‘number’], required): [0x030-0x03b] Arguments/Parameters for device Configuration commands.
configCmdArgs_2(object): [0x030-0x03b] Arguments/Parameters for device Configuration commands.value([‘string’, ‘number’], required): [0x030-0x03b] Arguments/Parameters for device Configuration commands.
reserved2(object): [0x03c-0x03f] Reserved for future use.value([‘string’, ‘number’], required): [0x03c-0x03f] Reserved for future use.
controllerMiscOption(object): [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more details.value([‘string’, ‘number’], required): [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more details.
deviceType(object): [0x044-0x044] Device Type: See Flash Type Definition for more details.value([‘string’, ‘number’], required): [0x044-0x044] Device Type: See Flash Type Definition for more details.
sflashPadType(object): [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal.value([‘string’, ‘number’], required): [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal.
serialClkFreq(object): [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot Chapter for more details.value([‘string’, ‘number’], required): [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot Chapter for more details.
lutCustomSeqEnable(object): [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot be done using 1 LUT sequence, currently, only applicable to HyperFLASH.value([‘string’, ‘number’], required): [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot be done using 1 LUT sequence, currently, only applicable to HyperFLASH.
reserved3_0(object): [0x048-0x04f] Reserved for future use.value([‘string’, ‘number’], required): [0x048-0x04f] Reserved for future use.
reserved3_1(object): [0x048-0x04f] Reserved for future use.value([‘string’, ‘number’], required): [0x048-0x04f] Reserved for future use.
sflashA1Size(object): [0x050-0x053] Size of Flash connected to A1.value([‘string’, ‘number’], required): [0x050-0x053] Size of Flash connected to A1.
sflashA2Size(object): [0x054-0x057] Size of Flash connected to A2.value([‘string’, ‘number’], required): [0x054-0x057] Size of Flash connected to A2.
sflashB1Size(object): [0x058-0x05b] Size of Flash connected to B1.value([‘string’, ‘number’], required): [0x058-0x05b] Size of Flash connected to B1.
sflashB2Size(object): [0x05c-0x05f] Size of Flash connected to B2.value([‘string’, ‘number’], required): [0x05c-0x05f] Size of Flash connected to B2.
csPadSettingOverride(object): [0x060-0x063] CS pad setting override value.value([‘string’, ‘number’], required): [0x060-0x063] CS pad setting override value.
sclkPadSettingOverride(object): [0x064-0x067] SCK pad setting override value.value([‘string’, ‘number’], required): [0x064-0x067] SCK pad setting override value.
dataPadSettingOverride(object): [0x068-0x06b] data pad setting override value.value([‘string’, ‘number’], required): [0x068-0x06b] data pad setting override value.
dqsPadSettingOverride(object): [0x06c-0x06f] DQS pad setting override value.value([‘string’, ‘number’], required): [0x06c-0x06f] DQS pad setting override value.
timeoutInMs(object): [0x070-0x073] Timeout threshold for read status command.value([‘string’, ‘number’], required): [0x070-0x073] Timeout threshold for read status command.
commandInterval(object): [0x074-0x077] CS deselect interval between two commands.value([‘string’, ‘number’], required): [0x074-0x077] CS deselect interval between two commands.
dataValidTime_0(object): [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns.value([‘string’, ‘number’], required): [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns.
dataValidTime_1(object): [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns.value([‘string’, ‘number’], required): [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns.
busyOffset(object): [0x07c-0x07d] Busy offset, valid value: 0-31.value([‘string’, ‘number’], required): [0x07c-0x07d] Busy offset, valid value: 0-31.
busyBitPolarity(object): [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - busy flag is 0 when flash device is busy.value([‘string’, ‘number’], required): [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - busy flag is 0 when flash device is busy.
lookupTable_0(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_1(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_2(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_3(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_4(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_5(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_6(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_7(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_8(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_9(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_10(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_11(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_12(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_13(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_14(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_15(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_16(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_17(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_18(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_19(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_20(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_21(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_22(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_23(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_24(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_25(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_26(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_27(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_28(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_29(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_30(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_31(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_32(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_33(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_34(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_35(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_36(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_37(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_38(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_39(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_40(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_41(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_42(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_43(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_44(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_45(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_46(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_47(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_48(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_49(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_50(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_51(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_52(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_53(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_54(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_55(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_56(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_57(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_58(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_59(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_60(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_61(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_62(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_63(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lutCustomSeq_0(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_1(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_2(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_3(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_4(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_5(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_6(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_7(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_8(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_9(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_10(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_11(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
reserved4_0(object): [0x1b0-0x1bf] Reserved for future use.value([‘string’, ‘number’], required): [0x1b0-0x1bf] Reserved for future use.
reserved4_1(object): [0x1b0-0x1bf] Reserved for future use.value([‘string’, ‘number’], required): [0x1b0-0x1bf] Reserved for future use.
reserved4_2(object): [0x1b0-0x1bf] Reserved for future use.value([‘string’, ‘number’], required): [0x1b0-0x1bf] Reserved for future use.
reserved4_3(object): [0x1b0-0x1bf] Reserved for future use.value([‘string’, ‘number’], required): [0x1b0-0x1bf] Reserved for future use.
pageSize(object): Page size of Serial NOR.value([‘string’, ‘number’], required): Page size of Serial NOR.
sectorSize(object): Sector size of Serial NOR.value([‘string’, ‘number’], required): Sector size of Serial NOR.
ipcmdSerialClkFreq(object): Clock frequency for IP command.value([‘string’, ‘number’], required): Clock frequency for IP command.
isUniformBlockSize(object): Sector/Block size is the same.value([‘string’, ‘number’], required): Sector/Block size is the same.
reserved0_0(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserved0_1(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
serialNorType(object): Serial NOR Flash type: 0/1/2/3.value([‘string’, ‘number’], required): Serial NOR Flash type: 0/1/2/3.
needExitNoCmdMode(object): Need to exit NoCmd mode before other IP command.value([‘string’, ‘number’], required): Need to exit NoCmd mode before other IP command.
halfClkForNonReadCmd(object): Half the Serial Clock for non-read command: true/false.value([‘string’, ‘number’], required): Half the Serial Clock for non-read command: true/false.
needRestoreNoCmdMode(object): Need to Restore NoCmd mode after IP commmand execution.value([‘string’, ‘number’], required): Need to Restore NoCmd mode after IP commmand execution.
blockSize(object): Block size.value([‘string’, ‘number’], required): Block size.
reserve2_0(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_1(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_2(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_3(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_4(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_5(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_6(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_7(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_8(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_9(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_10(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
# =========== FCB template for rt102x and flexspi_nor ===========
# ----------------------------------------------------------------------------------------------------
# == FCB template for rt102x and flexspi_nor ==
# ----------------------------------------------------------------------------------------------------
family: CHOOSE_FROM_TABLE # [Required], MCU family name; Possible options:['lpc55s3x', 'rt101x', 'rt102x', 'rt104x', 'rt105x', 'rt106x', 'rt116x', 'rt117x', 'rt118x', 'rt5xx', 'rt6xx', 'rw61x']
revision: a1 # [Optional], Chip silicon revision; If needed this could be used to specify silicon revision of device; Possible options:['latest']
type: flexspi_nor # [Required], Memory type; Specify type of memory used by FCB description; Possible options:['flexspi_nor']
fcb_settings: # [Required], rt102x
tag: # [Optional], tag; [0x000-0x003] Tag, fixed value 0x42464346UL
value: '0x00000000' # [Required], tag; [0x000-0x003] Tag, fixed value 0x42464346UL
version: # [Optional], version; [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix
value: '0x00000000' # [Required], version; [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix
reserved0: # [Optional], reserved0; [0x008-0x00b] Reserved for future use
value: '0x00000000' # [Required], reserved0; [0x008-0x00b] Reserved for future use
readSampleClkSrc: # [Optional], readSampleClkSrc; [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3
value: '0x00' # [Required], readSampleClkSrc; [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3
csHoldTime: # [Optional], csHoldTime; [0x00d-0x00d] CS hold time, default value: 3
value: '0x00' # [Required], csHoldTime; [0x00d-0x00d] CS hold time, default value: 3
csSetupTime: # [Optional], csSetupTime; [0x00e-0x00e] CS setup time, default value: 3
value: '0x00' # [Required], csSetupTime; [0x00e-0x00e] CS setup time, default value: 3
columnAddressWidth: # [Optional], columnAddressWidth; [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For Serial NAND, need to refer to datasheet
value: '0x00' # [Required], columnAddressWidth; [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For Serial NAND, need to refer to datasheet
deviceModeCfgEnable: # [Optional], deviceModeCfgEnable; [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable
value: '0x00' # [Required], deviceModeCfgEnable; [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable
deviceModeType: # [Optional], deviceModeType; [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, Generic configuration, etc.
value: '0x00' # [Required], deviceModeType; [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, Generic configuration, etc.
waitTimeCfgCommands: # [Optional], waitTimeCfgCommands; [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for DPI/QPI/OPI switch or reset command
value: '0x0000' # [Required], waitTimeCfgCommands; [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for DPI/QPI/OPI switch or reset command
deviceModeSeq: # [Optional], deviceModeSeq; [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt sequence number, [31:16] Reserved
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
deviceModeArg: # [Optional], deviceModeArg; [0x018-0x01b] Argument/Parameter for device configuration
value: '0x00000000' # [Required], deviceModeArg; [0x018-0x01b] Argument/Parameter for device configuration
configCmdEnable: # [Optional], configCmdEnable; [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable
value: '0x00' # [Required], configCmdEnable; [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable
configModeType_0: # [Optional], configModeType_0; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
value: '0x00' # [Required], configModeType_0; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
configModeType_1: # [Optional], configModeType_1; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
value: '0x00' # [Required], configModeType_1; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
configModeType_2: # [Optional], configModeType_2; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
value: '0x00' # [Required], configModeType_2; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
configCmdSeqs_0: # [Optional], configCmdSeqs_0; [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
configCmdSeqs_1: # [Optional], configCmdSeqs_1; [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
configCmdSeqs_2: # [Optional], configCmdSeqs_2; [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
reserved1: # [Optional], reserved1; [0x02c-0x02f] Reserved for future use
value: '0x00000000' # [Required], reserved1; [0x02c-0x02f] Reserved for future use
configCmdArgs_0: # [Optional], configCmdArgs_0; [0x030-0x03b] Arguments/Parameters for device Configuration commands
value: '0x00000000' # [Required], configCmdArgs_0; [0x030-0x03b] Arguments/Parameters for device Configuration commands
configCmdArgs_1: # [Optional], configCmdArgs_1; [0x030-0x03b] Arguments/Parameters for device Configuration commands
value: '0x00000000' # [Required], configCmdArgs_1; [0x030-0x03b] Arguments/Parameters for device Configuration commands
configCmdArgs_2: # [Optional], configCmdArgs_2; [0x030-0x03b] Arguments/Parameters for device Configuration commands
value: '0x00000000' # [Required], configCmdArgs_2; [0x030-0x03b] Arguments/Parameters for device Configuration commands
reserved2: # [Optional], reserved2; [0x03c-0x03f] Reserved for future use
value: '0x00000000' # [Required], reserved2; [0x03c-0x03f] Reserved for future use
controllerMiscOption: # [Optional], controllerMiscOption; [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more details
value: '0x00000000' # [Required], controllerMiscOption; [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more details
deviceType: # [Optional], deviceType; [0x044-0x044] Device Type: See Flash Type Definition for more details
value: '0x00' # [Required], deviceType; [0x044-0x044] Device Type: See Flash Type Definition for more details
sflashPadType: # [Optional], sflashPadType; [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
value: '0x00' # [Required], sflashPadType; [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
serialClkFreq: # [Optional], serialClkFreq; [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot Chapter for more details
value: '0x00' # [Required], serialClkFreq; [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot Chapter for more details
lutCustomSeqEnable: # [Optional], lutCustomSeqEnable; [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot be done using 1 LUT sequence, currently, only applicable to HyperFLASH
value: '0x00' # [Required], lutCustomSeqEnable; [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot be done using 1 LUT sequence, currently, only applicable to HyperFLASH
reserved3_0: # [Optional], reserved3_0; [0x048-0x04f] Reserved for future use
value: '0x00000000' # [Required], reserved3_0; [0x048-0x04f] Reserved for future use
reserved3_1: # [Optional], reserved3_1; [0x048-0x04f] Reserved for future use
value: '0x00000000' # [Required], reserved3_1; [0x048-0x04f] Reserved for future use
sflashA1Size: # [Optional], sflashA1Size; [0x050-0x053] Size of Flash connected to A1
value: '0x00000000' # [Required], sflashA1Size; [0x050-0x053] Size of Flash connected to A1
sflashA2Size: # [Optional], sflashA2Size; [0x054-0x057] Size of Flash connected to A2
value: '0x00000000' # [Required], sflashA2Size; [0x054-0x057] Size of Flash connected to A2
sflashB1Size: # [Optional], sflashB1Size; [0x058-0x05b] Size of Flash connected to B1
value: '0x00000000' # [Required], sflashB1Size; [0x058-0x05b] Size of Flash connected to B1
sflashB2Size: # [Optional], sflashB2Size; [0x05c-0x05f] Size of Flash connected to B2
value: '0x00000000' # [Required], sflashB2Size; [0x05c-0x05f] Size of Flash connected to B2
csPadSettingOverride: # [Optional], csPadSettingOverride; [0x060-0x063] CS pad setting override value
value: '0x00000000' # [Required], csPadSettingOverride; [0x060-0x063] CS pad setting override value
sclkPadSettingOverride: # [Optional], sclkPadSettingOverride; [0x064-0x067] SCK pad setting override value
value: '0x00000000' # [Required], sclkPadSettingOverride; [0x064-0x067] SCK pad setting override value
dataPadSettingOverride: # [Optional], dataPadSettingOverride; [0x068-0x06b] data pad setting override value
value: '0x00000000' # [Required], dataPadSettingOverride; [0x068-0x06b] data pad setting override value
dqsPadSettingOverride: # [Optional], dqsPadSettingOverride; [0x06c-0x06f] DQS pad setting override value
value: '0x00000000' # [Required], dqsPadSettingOverride; [0x06c-0x06f] DQS pad setting override value
timeoutInMs: # [Optional], timeoutInMs; [0x070-0x073] Timeout threshold for read status command
value: '0x00000000' # [Required], timeoutInMs; [0x070-0x073] Timeout threshold for read status command
commandInterval: # [Optional], commandInterval; [0x074-0x077] CS deselect interval between two commands
value: '0x00000000' # [Required], commandInterval; [0x074-0x077] CS deselect interval between two commands
dataValidTime_0: # [Optional], dataValidTime_0; [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
value: '0x0000' # [Required], dataValidTime_0; [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
dataValidTime_1: # [Optional], dataValidTime_1; [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
value: '0x0000' # [Required], dataValidTime_1; [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
busyOffset: # [Optional], busyOffset; [0x07c-0x07d] Busy offset, valid value: 0-31
value: '0x0000' # [Required], busyOffset; [0x07c-0x07d] Busy offset, valid value: 0-31
busyBitPolarity: # [Optional], busyBitPolarity; [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - busy flag is 0 when flash device is busy
value: '0x0000' # [Required], busyBitPolarity; [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - busy flag is 0 when flash device is busy
lookupTable_0: # [Optional], lookupTable_0; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_0; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_1: # [Optional], lookupTable_1; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_1; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_2: # [Optional], lookupTable_2; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_2; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_3: # [Optional], lookupTable_3; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_3; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_4: # [Optional], lookupTable_4; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_4; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_5: # [Optional], lookupTable_5; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_5; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_6: # [Optional], lookupTable_6; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_6; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_7: # [Optional], lookupTable_7; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_7; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_8: # [Optional], lookupTable_8; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_8; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_9: # [Optional], lookupTable_9; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_9; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_10: # [Optional], lookupTable_10; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_10; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_11: # [Optional], lookupTable_11; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_11; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_12: # [Optional], lookupTable_12; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_12; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_13: # [Optional], lookupTable_13; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_13; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_14: # [Optional], lookupTable_14; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_14; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_15: # [Optional], lookupTable_15; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_15; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_16: # [Optional], lookupTable_16; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_16; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_17: # [Optional], lookupTable_17; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_17; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_18: # [Optional], lookupTable_18; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_18; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_19: # [Optional], lookupTable_19; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_19; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_20: # [Optional], lookupTable_20; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_20; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_21: # [Optional], lookupTable_21; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_21; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_22: # [Optional], lookupTable_22; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_22; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_23: # [Optional], lookupTable_23; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_23; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_24: # [Optional], lookupTable_24; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_24; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_25: # [Optional], lookupTable_25; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_25; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_26: # [Optional], lookupTable_26; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_26; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_27: # [Optional], lookupTable_27; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_27; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_28: # [Optional], lookupTable_28; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_28; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_29: # [Optional], lookupTable_29; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_29; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_30: # [Optional], lookupTable_30; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_30; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_31: # [Optional], lookupTable_31; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_31; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_32: # [Optional], lookupTable_32; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_32; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_33: # [Optional], lookupTable_33; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_33; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_34: # [Optional], lookupTable_34; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_34; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_35: # [Optional], lookupTable_35; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_35; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_36: # [Optional], lookupTable_36; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_36; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_37: # [Optional], lookupTable_37; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_37; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_38: # [Optional], lookupTable_38; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_38; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_39: # [Optional], lookupTable_39; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_39; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_40: # [Optional], lookupTable_40; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_40; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_41: # [Optional], lookupTable_41; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_41; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_42: # [Optional], lookupTable_42; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_42; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_43: # [Optional], lookupTable_43; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_43; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_44: # [Optional], lookupTable_44; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_44; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_45: # [Optional], lookupTable_45; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_45; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_46: # [Optional], lookupTable_46; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_46; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_47: # [Optional], lookupTable_47; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_47; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_48: # [Optional], lookupTable_48; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_48; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_49: # [Optional], lookupTable_49; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_49; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_50: # [Optional], lookupTable_50; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_50; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_51: # [Optional], lookupTable_51; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_51; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_52: # [Optional], lookupTable_52; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_52; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_53: # [Optional], lookupTable_53; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_53; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_54: # [Optional], lookupTable_54; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_54; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_55: # [Optional], lookupTable_55; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_55; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_56: # [Optional], lookupTable_56; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_56; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_57: # [Optional], lookupTable_57; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_57; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_58: # [Optional], lookupTable_58; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_58; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_59: # [Optional], lookupTable_59; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_59; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_60: # [Optional], lookupTable_60; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_60; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_61: # [Optional], lookupTable_61; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_61; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_62: # [Optional], lookupTable_62; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_62; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_63: # [Optional], lookupTable_63; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_63; [0x080-0x17f] Lookup table holds Flash command sequences
lutCustomSeq_0: # [Optional], lutCustomSeq_0; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_1: # [Optional], lutCustomSeq_1; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_2: # [Optional], lutCustomSeq_2; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_3: # [Optional], lutCustomSeq_3; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_4: # [Optional], lutCustomSeq_4; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_5: # [Optional], lutCustomSeq_5; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_6: # [Optional], lutCustomSeq_6; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_7: # [Optional], lutCustomSeq_7; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_8: # [Optional], lutCustomSeq_8; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_9: # [Optional], lutCustomSeq_9; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_10: # [Optional], lutCustomSeq_10; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_11: # [Optional], lutCustomSeq_11; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
reserved4_0: # [Optional], reserved4_0; [0x1b0-0x1bf] Reserved for future use
value: '0x00000000' # [Required], reserved4_0; [0x1b0-0x1bf] Reserved for future use
reserved4_1: # [Optional], reserved4_1; [0x1b0-0x1bf] Reserved for future use
value: '0x00000000' # [Required], reserved4_1; [0x1b0-0x1bf] Reserved for future use
reserved4_2: # [Optional], reserved4_2; [0x1b0-0x1bf] Reserved for future use
value: '0x00000000' # [Required], reserved4_2; [0x1b0-0x1bf] Reserved for future use
reserved4_3: # [Optional], reserved4_3; [0x1b0-0x1bf] Reserved for future use
value: '0x00000000' # [Required], reserved4_3; [0x1b0-0x1bf] Reserved for future use
pageSize: # [Optional], pageSize; Page size of Serial NOR
value: '0x00000000' # [Required], pageSize; Page size of Serial NOR
sectorSize: # [Optional], sectorSize; Sector size of Serial NOR
value: '0x00000000' # [Required], sectorSize; Sector size of Serial NOR
ipcmdSerialClkFreq: # [Optional], ipcmdSerialClkFreq; Clock frequency for IP command
value: '0x00' # [Required], ipcmdSerialClkFreq; Clock frequency for IP command
isUniformBlockSize: # [Optional], isUniformBlockSize; Sector/Block size is the same
value: '0x00' # [Required], isUniformBlockSize; Sector/Block size is the same
reserved0_0: # [Optional], reserved0_0; Reserved for future use
value: '0x00' # [Required], reserved0_0; Reserved for future use
reserved0_1: # [Optional], reserved0_1; Reserved for future use
value: '0x00' # [Required], reserved0_1; Reserved for future use
serialNorType: # [Optional], serialNorType; Serial NOR Flash type: 0/1/2/3
value: '0x00' # [Required], serialNorType; Serial NOR Flash type: 0/1/2/3
needExitNoCmdMode: # [Optional], needExitNoCmdMode; Need to exit NoCmd mode before other IP command
value: '0x00' # [Required], needExitNoCmdMode; Need to exit NoCmd mode before other IP command
halfClkForNonReadCmd: # [Optional], halfClkForNonReadCmd; Half the Serial Clock for non-read command: true/false
value: '0x00' # [Required], halfClkForNonReadCmd; Half the Serial Clock for non-read command: true/false
needRestoreNoCmdMode: # [Optional], needRestoreNoCmdMode; Need to Restore NoCmd mode after IP commmand execution
value: '0x00' # [Required], needRestoreNoCmdMode; Need to Restore NoCmd mode after IP commmand execution
blockSize: # [Optional], blockSize; Block size
value: '0x00000000' # [Required], blockSize; Block size
reserve2_0: # [Optional], reserve2_0; Reserved for future use
value: '0x00000000' # [Required], reserve2_0; Reserved for future use
reserve2_1: # [Optional], reserve2_1; Reserved for future use
value: '0x00000000' # [Required], reserve2_1; Reserved for future use
reserve2_2: # [Optional], reserve2_2; Reserved for future use
value: '0x00000000' # [Required], reserve2_2; Reserved for future use
reserve2_3: # [Optional], reserve2_3; Reserved for future use
value: '0x00000000' # [Required], reserve2_3; Reserved for future use
reserve2_4: # [Optional], reserve2_4; Reserved for future use
value: '0x00000000' # [Required], reserve2_4; Reserved for future use
reserve2_5: # [Optional], reserve2_5; Reserved for future use
value: '0x00000000' # [Required], reserve2_5; Reserved for future use
reserve2_6: # [Optional], reserve2_6; Reserved for future use
value: '0x00000000' # [Required], reserve2_6; Reserved for future use
reserve2_7: # [Optional], reserve2_7; Reserved for future use
value: '0x00000000' # [Required], reserve2_7; Reserved for future use
reserve2_8: # [Optional], reserve2_8; Reserved for future use
value: '0x00000000' # [Required], reserve2_8; Reserved for future use
reserve2_9: # [Optional], reserve2_9; Reserved for future use
value: '0x00000000' # [Required], reserve2_9; Reserved for future use
reserve2_10: # [Optional], reserve2_10; Reserved for future use
value: '0x00000000' # [Required], reserve2_10; Reserved for future use
FCB template for rt104x and flexspi_nor
family(string): MCU family name. Must be one of:["lpc55s3x", "rt101x", "rt102x", "rt104x", "rt105x", "rt106x", "rt116x", "rt117x", "rt118x", "rt5xx", "rt6xx", "rw61x"].revision(string): If needed this could be used to specify silicon revision of device. Must be one of:["latest"].type(string): Specify type of memory used by FCB description. Must be one of:["flexspi_nor"].fcb_settings(object)tag(object): [0x000-0x003] Tag, fixed value 0x42464346UL.value([‘string’, ‘number’], required): [0x000-0x003] Tag, fixed value 0x42464346UL.
version(object): [0x004-0x007] Version,[31:24] -‘V’, [23:16] - Major, [15:8] - Minor, [7:0] - bugfix.value([‘string’, ‘number’], required): [0x004-0x007] Version,[31:24] -‘V’, [23:16] - Major, [15:8] - Minor, [7:0] - bugfix.
reserved0(object): [0x008-0x00b] Reserved for future use.value([‘string’, ‘number’], required): [0x008-0x00b] Reserved for future use.
readSampleClkSrc(object): [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3.value([‘string’, ‘number’], required): [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3.
csHoldTime(object): [0x00d-0x00d] CS hold time, default value: 3.value([‘string’, ‘number’], required): [0x00d-0x00d] CS hold time, default value: 3.
csSetupTime(object): [0x00e-0x00e] CS setup time, default value: 3.value([‘string’, ‘number’], required): [0x00e-0x00e] CS setup time, default value: 3.
columnAddressWidth(object): [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For Serial NAND, need to refer to datasheet.value([‘string’, ‘number’], required): [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For Serial NAND, need to refer to datasheet.
deviceModeCfgEnable(object): [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable.value([‘string’, ‘number’], required): [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable.
deviceModeType(object): [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, Generic configuration, etc.value([‘string’, ‘number’], required): [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, Generic configuration, etc.
waitTimeCfgCommands(object): [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for DPI/QPI/OPI switch or reset command.value([‘string’, ‘number’], required): [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for DPI/QPI/OPI switch or reset command.
deviceModeSeq(object): [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt sequence number, [31:16] Reserved.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
deviceModeArg(object): [0x018-0x01b] Argument/Parameter for device configuration.value([‘string’, ‘number’], required): [0x018-0x01b] Argument/Parameter for device configuration.
configCmdEnable(object): [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable.value([‘string’, ‘number’], required): [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable.
configModeType_0(object): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe.value([‘string’, ‘number’], required): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe.
configModeType_1(object): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe.value([‘string’, ‘number’], required): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe.
configModeType_2(object): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe.value([‘string’, ‘number’], required): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe.
configCmdSeqs_0(object): [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
configCmdSeqs_1(object): [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
configCmdSeqs_2(object): [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
reserved1(object): [0x02c-0x02f] Reserved for future use.value([‘string’, ‘number’], required): [0x02c-0x02f] Reserved for future use.
configCmdArgs_0(object): [0x030-0x03b] Arguments/Parameters for device Configuration commands.value([‘string’, ‘number’], required): [0x030-0x03b] Arguments/Parameters for device Configuration commands.
configCmdArgs_1(object): [0x030-0x03b] Arguments/Parameters for device Configuration commands.value([‘string’, ‘number’], required): [0x030-0x03b] Arguments/Parameters for device Configuration commands.
configCmdArgs_2(object): [0x030-0x03b] Arguments/Parameters for device Configuration commands.value([‘string’, ‘number’], required): [0x030-0x03b] Arguments/Parameters for device Configuration commands.
reserved2(object): [0x03c-0x03f] Reserved for future use.value([‘string’, ‘number’], required): [0x03c-0x03f] Reserved for future use.
controllerMiscOption(object): [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more details.value([‘string’, ‘number’], required): [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more details.
deviceType(object): [0x044-0x044] Device Type: See Flash Type Definition for more details.value([‘string’, ‘number’], required): [0x044-0x044] Device Type: See Flash Type Definition for more details.
sflashPadType(object): [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal.value([‘string’, ‘number’], required): [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal.
serialClkFreq(object): [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot Chapter for more details.value([‘string’, ‘number’], required): [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot Chapter for more details.
lutCustomSeqEnable(object): [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot be done using 1 LUT sequence, currently, only applicable to HyperFLASH.value([‘string’, ‘number’], required): [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot be done using 1 LUT sequence, currently, only applicable to HyperFLASH.
reserved3_0(object): [0x048-0x04f] Reserved for future use.value([‘string’, ‘number’], required): [0x048-0x04f] Reserved for future use.
reserved3_1(object): [0x048-0x04f] Reserved for future use.value([‘string’, ‘number’], required): [0x048-0x04f] Reserved for future use.
sflashA1Size(object): [0x050-0x053] Size of Flash connected to A1.value([‘string’, ‘number’], required): [0x050-0x053] Size of Flash connected to A1.
sflashA2Size(object): [0x054-0x057] Size of Flash connected to A2.value([‘string’, ‘number’], required): [0x054-0x057] Size of Flash connected to A2.
sflashB1Size(object): [0x058-0x05b] Size of Flash connected to B1.value([‘string’, ‘number’], required): [0x058-0x05b] Size of Flash connected to B1.
sflashB2Size(object): [0x05c-0x05f] Size of Flash connected to B2.value([‘string’, ‘number’], required): [0x05c-0x05f] Size of Flash connected to B2.
csPadSettingOverride(object): [0x060-0x063] CS pad setting override value.value([‘string’, ‘number’], required): [0x060-0x063] CS pad setting override value.
sclkPadSettingOverride(object): [0x064-0x067] SCK pad setting override value.value([‘string’, ‘number’], required): [0x064-0x067] SCK pad setting override value.
dataPadSettingOverride(object): [0x068-0x06b] data pad setting override value.value([‘string’, ‘number’], required): [0x068-0x06b] data pad setting override value.
dqsPadSettingOverride(object): [0x06c-0x06f] DQS pad setting override value.value([‘string’, ‘number’], required): [0x06c-0x06f] DQS pad setting override value.
timeoutInMs(object): [0x070-0x073] Timeout threshold for read status command.value([‘string’, ‘number’], required): [0x070-0x073] Timeout threshold for read status command.
commandInterval(object): [0x074-0x077] CS deselect interval between two commands.value([‘string’, ‘number’], required): [0x074-0x077] CS deselect interval between two commands.
dataValidTime_0(object): [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns.value([‘string’, ‘number’], required): [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns.
dataValidTime_1(object): [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns.value([‘string’, ‘number’], required): [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns.
busyOffset(object): [0x07c-0x07d] Busy offset, valid value: 0-31.value([‘string’, ‘number’], required): [0x07c-0x07d] Busy offset, valid value: 0-31.
busyBitPolarity(object): [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - busy flag is 0 when flash device is busy.value([‘string’, ‘number’], required): [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - busy flag is 0 when flash device is busy.
lookupTable_0(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_1(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_2(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_3(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_4(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_5(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_6(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_7(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_8(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_9(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_10(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_11(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_12(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_13(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_14(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_15(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_16(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_17(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_18(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_19(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_20(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_21(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_22(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_23(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_24(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_25(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_26(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_27(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_28(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_29(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_30(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_31(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_32(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_33(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_34(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_35(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_36(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_37(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_38(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_39(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_40(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_41(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_42(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_43(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_44(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_45(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_46(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_47(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_48(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_49(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_50(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_51(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_52(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_53(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_54(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_55(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_56(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_57(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_58(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_59(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_60(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_61(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_62(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_63(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lutCustomSeq_0(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_1(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_2(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_3(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_4(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_5(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_6(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_7(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_8(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_9(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_10(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_11(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
reserved4_0(object): [0x1b0-0x1bf] Reserved for future use.value([‘string’, ‘number’], required): [0x1b0-0x1bf] Reserved for future use.
reserved4_1(object): [0x1b0-0x1bf] Reserved for future use.value([‘string’, ‘number’], required): [0x1b0-0x1bf] Reserved for future use.
reserved4_2(object): [0x1b0-0x1bf] Reserved for future use.value([‘string’, ‘number’], required): [0x1b0-0x1bf] Reserved for future use.
reserved4_3(object): [0x1b0-0x1bf] Reserved for future use.value([‘string’, ‘number’], required): [0x1b0-0x1bf] Reserved for future use.
pageSize(object): Page size of Serial NOR.value([‘string’, ‘number’], required): Page size of Serial NOR.
sectorSize(object): Sector size of Serial NOR.value([‘string’, ‘number’], required): Sector size of Serial NOR.
ipcmdSerialClkFreq(object): Clock frequency for IP command.value([‘string’, ‘number’], required): Clock frequency for IP command.
isUniformBlockSize(object): Sector/Block size is the same.value([‘string’, ‘number’], required): Sector/Block size is the same.
reserved0_0(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserved0_1(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
serialNorType(object): Serial NOR Flash type: 0/1/2/3.value([‘string’, ‘number’], required): Serial NOR Flash type: 0/1/2/3.
needExitNoCmdMode(object): Need to exit NoCmd mode before other IP command.value([‘string’, ‘number’], required): Need to exit NoCmd mode before other IP command.
halfClkForNonReadCmd(object): Half the Serial Clock for non-read command: true/false.value([‘string’, ‘number’], required): Half the Serial Clock for non-read command: true/false.
needRestoreNoCmdMode(object): Need to Restore NoCmd mode after IP commmand execution.value([‘string’, ‘number’], required): Need to Restore NoCmd mode after IP commmand execution.
blockSize(object): Block size.value([‘string’, ‘number’], required): Block size.
reserve2_0(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_1(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_2(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_3(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_4(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_5(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_6(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_7(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_8(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_9(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_10(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
# =========== FCB template for rt104x and flexspi_nor ===========
# ----------------------------------------------------------------------------------------------------
# == FCB template for rt104x and flexspi_nor ==
# ----------------------------------------------------------------------------------------------------
family: CHOOSE_FROM_TABLE # [Required], MCU family name; Possible options:['lpc55s3x', 'rt101x', 'rt102x', 'rt104x', 'rt105x', 'rt106x', 'rt116x', 'rt117x', 'rt118x', 'rt5xx', 'rt6xx', 'rw61x']
revision: a1 # [Optional], Chip silicon revision; If needed this could be used to specify silicon revision of device; Possible options:['latest']
type: flexspi_nor # [Required], Memory type; Specify type of memory used by FCB description; Possible options:['flexspi_nor']
fcb_settings: # [Required], rt104x
tag: # [Optional], tag; [0x000-0x003] Tag, fixed value 0x42464346UL
value: '0x00000000' # [Required], tag; [0x000-0x003] Tag, fixed value 0x42464346UL
version: # [Optional], version; [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix
value: '0x00000000' # [Required], version; [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix
reserved0: # [Optional], reserved0; [0x008-0x00b] Reserved for future use
value: '0x00000000' # [Required], reserved0; [0x008-0x00b] Reserved for future use
readSampleClkSrc: # [Optional], readSampleClkSrc; [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3
value: '0x00' # [Required], readSampleClkSrc; [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3
csHoldTime: # [Optional], csHoldTime; [0x00d-0x00d] CS hold time, default value: 3
value: '0x00' # [Required], csHoldTime; [0x00d-0x00d] CS hold time, default value: 3
csSetupTime: # [Optional], csSetupTime; [0x00e-0x00e] CS setup time, default value: 3
value: '0x00' # [Required], csSetupTime; [0x00e-0x00e] CS setup time, default value: 3
columnAddressWidth: # [Optional], columnAddressWidth; [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For Serial NAND, need to refer to datasheet
value: '0x00' # [Required], columnAddressWidth; [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For Serial NAND, need to refer to datasheet
deviceModeCfgEnable: # [Optional], deviceModeCfgEnable; [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable
value: '0x00' # [Required], deviceModeCfgEnable; [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable
deviceModeType: # [Optional], deviceModeType; [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, Generic configuration, etc.
value: '0x00' # [Required], deviceModeType; [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, Generic configuration, etc.
waitTimeCfgCommands: # [Optional], waitTimeCfgCommands; [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for DPI/QPI/OPI switch or reset command
value: '0x0000' # [Required], waitTimeCfgCommands; [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for DPI/QPI/OPI switch or reset command
deviceModeSeq: # [Optional], deviceModeSeq; [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt sequence number, [31:16] Reserved
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
deviceModeArg: # [Optional], deviceModeArg; [0x018-0x01b] Argument/Parameter for device configuration
value: '0x00000000' # [Required], deviceModeArg; [0x018-0x01b] Argument/Parameter for device configuration
configCmdEnable: # [Optional], configCmdEnable; [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable
value: '0x00' # [Required], configCmdEnable; [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable
configModeType_0: # [Optional], configModeType_0; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
value: '0x00' # [Required], configModeType_0; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
configModeType_1: # [Optional], configModeType_1; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
value: '0x00' # [Required], configModeType_1; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
configModeType_2: # [Optional], configModeType_2; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
value: '0x00' # [Required], configModeType_2; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
configCmdSeqs_0: # [Optional], configCmdSeqs_0; [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
configCmdSeqs_1: # [Optional], configCmdSeqs_1; [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
configCmdSeqs_2: # [Optional], configCmdSeqs_2; [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
reserved1: # [Optional], reserved1; [0x02c-0x02f] Reserved for future use
value: '0x00000000' # [Required], reserved1; [0x02c-0x02f] Reserved for future use
configCmdArgs_0: # [Optional], configCmdArgs_0; [0x030-0x03b] Arguments/Parameters for device Configuration commands
value: '0x00000000' # [Required], configCmdArgs_0; [0x030-0x03b] Arguments/Parameters for device Configuration commands
configCmdArgs_1: # [Optional], configCmdArgs_1; [0x030-0x03b] Arguments/Parameters for device Configuration commands
value: '0x00000000' # [Required], configCmdArgs_1; [0x030-0x03b] Arguments/Parameters for device Configuration commands
configCmdArgs_2: # [Optional], configCmdArgs_2; [0x030-0x03b] Arguments/Parameters for device Configuration commands
value: '0x00000000' # [Required], configCmdArgs_2; [0x030-0x03b] Arguments/Parameters for device Configuration commands
reserved2: # [Optional], reserved2; [0x03c-0x03f] Reserved for future use
value: '0x00000000' # [Required], reserved2; [0x03c-0x03f] Reserved for future use
controllerMiscOption: # [Optional], controllerMiscOption; [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more details
value: '0x00000000' # [Required], controllerMiscOption; [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more details
deviceType: # [Optional], deviceType; [0x044-0x044] Device Type: See Flash Type Definition for more details
value: '0x00' # [Required], deviceType; [0x044-0x044] Device Type: See Flash Type Definition for more details
sflashPadType: # [Optional], sflashPadType; [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
value: '0x00' # [Required], sflashPadType; [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
serialClkFreq: # [Optional], serialClkFreq; [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot Chapter for more details
value: '0x00' # [Required], serialClkFreq; [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot Chapter for more details
lutCustomSeqEnable: # [Optional], lutCustomSeqEnable; [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot be done using 1 LUT sequence, currently, only applicable to HyperFLASH
value: '0x00' # [Required], lutCustomSeqEnable; [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot be done using 1 LUT sequence, currently, only applicable to HyperFLASH
reserved3_0: # [Optional], reserved3_0; [0x048-0x04f] Reserved for future use
value: '0x00000000' # [Required], reserved3_0; [0x048-0x04f] Reserved for future use
reserved3_1: # [Optional], reserved3_1; [0x048-0x04f] Reserved for future use
value: '0x00000000' # [Required], reserved3_1; [0x048-0x04f] Reserved for future use
sflashA1Size: # [Optional], sflashA1Size; [0x050-0x053] Size of Flash connected to A1
value: '0x00000000' # [Required], sflashA1Size; [0x050-0x053] Size of Flash connected to A1
sflashA2Size: # [Optional], sflashA2Size; [0x054-0x057] Size of Flash connected to A2
value: '0x00000000' # [Required], sflashA2Size; [0x054-0x057] Size of Flash connected to A2
sflashB1Size: # [Optional], sflashB1Size; [0x058-0x05b] Size of Flash connected to B1
value: '0x00000000' # [Required], sflashB1Size; [0x058-0x05b] Size of Flash connected to B1
sflashB2Size: # [Optional], sflashB2Size; [0x05c-0x05f] Size of Flash connected to B2
value: '0x00000000' # [Required], sflashB2Size; [0x05c-0x05f] Size of Flash connected to B2
csPadSettingOverride: # [Optional], csPadSettingOverride; [0x060-0x063] CS pad setting override value
value: '0x00000000' # [Required], csPadSettingOverride; [0x060-0x063] CS pad setting override value
sclkPadSettingOverride: # [Optional], sclkPadSettingOverride; [0x064-0x067] SCK pad setting override value
value: '0x00000000' # [Required], sclkPadSettingOverride; [0x064-0x067] SCK pad setting override value
dataPadSettingOverride: # [Optional], dataPadSettingOverride; [0x068-0x06b] data pad setting override value
value: '0x00000000' # [Required], dataPadSettingOverride; [0x068-0x06b] data pad setting override value
dqsPadSettingOverride: # [Optional], dqsPadSettingOverride; [0x06c-0x06f] DQS pad setting override value
value: '0x00000000' # [Required], dqsPadSettingOverride; [0x06c-0x06f] DQS pad setting override value
timeoutInMs: # [Optional], timeoutInMs; [0x070-0x073] Timeout threshold for read status command
value: '0x00000000' # [Required], timeoutInMs; [0x070-0x073] Timeout threshold for read status command
commandInterval: # [Optional], commandInterval; [0x074-0x077] CS deselect interval between two commands
value: '0x00000000' # [Required], commandInterval; [0x074-0x077] CS deselect interval between two commands
dataValidTime_0: # [Optional], dataValidTime_0; [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
value: '0x0000' # [Required], dataValidTime_0; [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
dataValidTime_1: # [Optional], dataValidTime_1; [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
value: '0x0000' # [Required], dataValidTime_1; [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
busyOffset: # [Optional], busyOffset; [0x07c-0x07d] Busy offset, valid value: 0-31
value: '0x0000' # [Required], busyOffset; [0x07c-0x07d] Busy offset, valid value: 0-31
busyBitPolarity: # [Optional], busyBitPolarity; [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - busy flag is 0 when flash device is busy
value: '0x0000' # [Required], busyBitPolarity; [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - busy flag is 0 when flash device is busy
lookupTable_0: # [Optional], lookupTable_0; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_0; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_1: # [Optional], lookupTable_1; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_1; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_2: # [Optional], lookupTable_2; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_2; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_3: # [Optional], lookupTable_3; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_3; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_4: # [Optional], lookupTable_4; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_4; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_5: # [Optional], lookupTable_5; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_5; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_6: # [Optional], lookupTable_6; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_6; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_7: # [Optional], lookupTable_7; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_7; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_8: # [Optional], lookupTable_8; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_8; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_9: # [Optional], lookupTable_9; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_9; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_10: # [Optional], lookupTable_10; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_10; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_11: # [Optional], lookupTable_11; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_11; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_12: # [Optional], lookupTable_12; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_12; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_13: # [Optional], lookupTable_13; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_13; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_14: # [Optional], lookupTable_14; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_14; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_15: # [Optional], lookupTable_15; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_15; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_16: # [Optional], lookupTable_16; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_16; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_17: # [Optional], lookupTable_17; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_17; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_18: # [Optional], lookupTable_18; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_18; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_19: # [Optional], lookupTable_19; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_19; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_20: # [Optional], lookupTable_20; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_20; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_21: # [Optional], lookupTable_21; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_21; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_22: # [Optional], lookupTable_22; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_22; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_23: # [Optional], lookupTable_23; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_23; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_24: # [Optional], lookupTable_24; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_24; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_25: # [Optional], lookupTable_25; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_25; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_26: # [Optional], lookupTable_26; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_26; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_27: # [Optional], lookupTable_27; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_27; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_28: # [Optional], lookupTable_28; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_28; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_29: # [Optional], lookupTable_29; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_29; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_30: # [Optional], lookupTable_30; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_30; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_31: # [Optional], lookupTable_31; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_31; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_32: # [Optional], lookupTable_32; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_32; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_33: # [Optional], lookupTable_33; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_33; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_34: # [Optional], lookupTable_34; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_34; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_35: # [Optional], lookupTable_35; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_35; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_36: # [Optional], lookupTable_36; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_36; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_37: # [Optional], lookupTable_37; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_37; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_38: # [Optional], lookupTable_38; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_38; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_39: # [Optional], lookupTable_39; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_39; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_40: # [Optional], lookupTable_40; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_40; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_41: # [Optional], lookupTable_41; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_41; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_42: # [Optional], lookupTable_42; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_42; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_43: # [Optional], lookupTable_43; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_43; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_44: # [Optional], lookupTable_44; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_44; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_45: # [Optional], lookupTable_45; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_45; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_46: # [Optional], lookupTable_46; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_46; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_47: # [Optional], lookupTable_47; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_47; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_48: # [Optional], lookupTable_48; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_48; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_49: # [Optional], lookupTable_49; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_49; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_50: # [Optional], lookupTable_50; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_50; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_51: # [Optional], lookupTable_51; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_51; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_52: # [Optional], lookupTable_52; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_52; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_53: # [Optional], lookupTable_53; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_53; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_54: # [Optional], lookupTable_54; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_54; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_55: # [Optional], lookupTable_55; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_55; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_56: # [Optional], lookupTable_56; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_56; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_57: # [Optional], lookupTable_57; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_57; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_58: # [Optional], lookupTable_58; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_58; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_59: # [Optional], lookupTable_59; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_59; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_60: # [Optional], lookupTable_60; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_60; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_61: # [Optional], lookupTable_61; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_61; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_62: # [Optional], lookupTable_62; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_62; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_63: # [Optional], lookupTable_63; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_63; [0x080-0x17f] Lookup table holds Flash command sequences
lutCustomSeq_0: # [Optional], lutCustomSeq_0; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_1: # [Optional], lutCustomSeq_1; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_2: # [Optional], lutCustomSeq_2; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_3: # [Optional], lutCustomSeq_3; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_4: # [Optional], lutCustomSeq_4; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_5: # [Optional], lutCustomSeq_5; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_6: # [Optional], lutCustomSeq_6; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_7: # [Optional], lutCustomSeq_7; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_8: # [Optional], lutCustomSeq_8; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_9: # [Optional], lutCustomSeq_9; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_10: # [Optional], lutCustomSeq_10; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_11: # [Optional], lutCustomSeq_11; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
reserved4_0: # [Optional], reserved4_0; [0x1b0-0x1bf] Reserved for future use
value: '0x00000000' # [Required], reserved4_0; [0x1b0-0x1bf] Reserved for future use
reserved4_1: # [Optional], reserved4_1; [0x1b0-0x1bf] Reserved for future use
value: '0x00000000' # [Required], reserved4_1; [0x1b0-0x1bf] Reserved for future use
reserved4_2: # [Optional], reserved4_2; [0x1b0-0x1bf] Reserved for future use
value: '0x00000000' # [Required], reserved4_2; [0x1b0-0x1bf] Reserved for future use
reserved4_3: # [Optional], reserved4_3; [0x1b0-0x1bf] Reserved for future use
value: '0x00000000' # [Required], reserved4_3; [0x1b0-0x1bf] Reserved for future use
pageSize: # [Optional], pageSize; Page size of Serial NOR
value: '0x00000000' # [Required], pageSize; Page size of Serial NOR
sectorSize: # [Optional], sectorSize; Sector size of Serial NOR
value: '0x00000000' # [Required], sectorSize; Sector size of Serial NOR
ipcmdSerialClkFreq: # [Optional], ipcmdSerialClkFreq; Clock frequency for IP command
value: '0x00' # [Required], ipcmdSerialClkFreq; Clock frequency for IP command
isUniformBlockSize: # [Optional], isUniformBlockSize; Sector/Block size is the same
value: '0x00' # [Required], isUniformBlockSize; Sector/Block size is the same
reserved0_0: # [Optional], reserved0_0; Reserved for future use
value: '0x00' # [Required], reserved0_0; Reserved for future use
reserved0_1: # [Optional], reserved0_1; Reserved for future use
value: '0x00' # [Required], reserved0_1; Reserved for future use
serialNorType: # [Optional], serialNorType; Serial NOR Flash type: 0/1/2/3
value: '0x00' # [Required], serialNorType; Serial NOR Flash type: 0/1/2/3
needExitNoCmdMode: # [Optional], needExitNoCmdMode; Need to exit NoCmd mode before other IP command
value: '0x00' # [Required], needExitNoCmdMode; Need to exit NoCmd mode before other IP command
halfClkForNonReadCmd: # [Optional], halfClkForNonReadCmd; Half the Serial Clock for non-read command: true/false
value: '0x00' # [Required], halfClkForNonReadCmd; Half the Serial Clock for non-read command: true/false
needRestoreNoCmdMode: # [Optional], needRestoreNoCmdMode; Need to Restore NoCmd mode after IP commmand execution
value: '0x00' # [Required], needRestoreNoCmdMode; Need to Restore NoCmd mode after IP commmand execution
blockSize: # [Optional], blockSize; Block size
value: '0x00000000' # [Required], blockSize; Block size
reserve2_0: # [Optional], reserve2_0; Reserved for future use
value: '0x00000000' # [Required], reserve2_0; Reserved for future use
reserve2_1: # [Optional], reserve2_1; Reserved for future use
value: '0x00000000' # [Required], reserve2_1; Reserved for future use
reserve2_2: # [Optional], reserve2_2; Reserved for future use
value: '0x00000000' # [Required], reserve2_2; Reserved for future use
reserve2_3: # [Optional], reserve2_3; Reserved for future use
value: '0x00000000' # [Required], reserve2_3; Reserved for future use
reserve2_4: # [Optional], reserve2_4; Reserved for future use
value: '0x00000000' # [Required], reserve2_4; Reserved for future use
reserve2_5: # [Optional], reserve2_5; Reserved for future use
value: '0x00000000' # [Required], reserve2_5; Reserved for future use
reserve2_6: # [Optional], reserve2_6; Reserved for future use
value: '0x00000000' # [Required], reserve2_6; Reserved for future use
reserve2_7: # [Optional], reserve2_7; Reserved for future use
value: '0x00000000' # [Required], reserve2_7; Reserved for future use
reserve2_8: # [Optional], reserve2_8; Reserved for future use
value: '0x00000000' # [Required], reserve2_8; Reserved for future use
reserve2_9: # [Optional], reserve2_9; Reserved for future use
value: '0x00000000' # [Required], reserve2_9; Reserved for future use
reserve2_10: # [Optional], reserve2_10; Reserved for future use
value: '0x00000000' # [Required], reserve2_10; Reserved for future use
FCB template for rt105x and flexspi_nor
family(string): MCU family name. Must be one of:["lpc55s3x", "rt101x", "rt102x", "rt104x", "rt105x", "rt106x", "rt116x", "rt117x", "rt118x", "rt5xx", "rt6xx", "rw61x"].revision(string): If needed this could be used to specify silicon revision of device. Must be one of:["latest"].type(string): Specify type of memory used by FCB description. Must be one of:["flexspi_nor"].fcb_settings(object)tag(object): [0x000-0x003] Tag, fixed value 0x42464346UL.value([‘string’, ‘number’], required): [0x000-0x003] Tag, fixed value 0x42464346UL.
version(object): [0x004-0x007] Version,[31:24] -‘V’, [23:16] - Major, [15:8] - Minor, [7:0] - bugfix.value([‘string’, ‘number’], required): [0x004-0x007] Version,[31:24] -‘V’, [23:16] - Major, [15:8] - Minor, [7:0] - bugfix.
reserved0(object): [0x008-0x00b] Reserved for future use.value([‘string’, ‘number’], required): [0x008-0x00b] Reserved for future use.
readSampleClkSrc(object): [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3.value([‘string’, ‘number’], required): [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3.
csHoldTime(object): [0x00d-0x00d] CS hold time, default value: 3.value([‘string’, ‘number’], required): [0x00d-0x00d] CS hold time, default value: 3.
csSetupTime(object): [0x00e-0x00e] CS setup time, default value: 3.value([‘string’, ‘number’], required): [0x00e-0x00e] CS setup time, default value: 3.
columnAddressWidth(object): [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For Serial NAND, need to refer to datasheet.value([‘string’, ‘number’], required): [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For Serial NAND, need to refer to datasheet.
deviceModeCfgEnable(object): [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable.value([‘string’, ‘number’], required): [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable.
deviceModeType(object): [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, Generic configuration, etc.value([‘string’, ‘number’], required): [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, Generic configuration, etc.
waitTimeCfgCommands(object): [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for DPI/QPI/OPI switch or reset command.value([‘string’, ‘number’], required): [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for DPI/QPI/OPI switch or reset command.
deviceModeSeq(object): [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt sequence number, [31:16] Reserved.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
deviceModeArg(object): [0x018-0x01b] Argument/Parameter for device configuration.value([‘string’, ‘number’], required): [0x018-0x01b] Argument/Parameter for device configuration.
configCmdEnable(object): [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable.value([‘string’, ‘number’], required): [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable.
configModeType_0(object): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe.value([‘string’, ‘number’], required): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe.
configModeType_1(object): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe.value([‘string’, ‘number’], required): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe.
configModeType_2(object): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe.value([‘string’, ‘number’], required): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe.
configCmdSeqs_0(object): [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
configCmdSeqs_1(object): [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
configCmdSeqs_2(object): [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
reserved1(object): [0x02c-0x02f] Reserved for future use.value([‘string’, ‘number’], required): [0x02c-0x02f] Reserved for future use.
configCmdArgs_0(object): [0x030-0x03b] Arguments/Parameters for device Configuration commands.value([‘string’, ‘number’], required): [0x030-0x03b] Arguments/Parameters for device Configuration commands.
configCmdArgs_1(object): [0x030-0x03b] Arguments/Parameters for device Configuration commands.value([‘string’, ‘number’], required): [0x030-0x03b] Arguments/Parameters for device Configuration commands.
configCmdArgs_2(object): [0x030-0x03b] Arguments/Parameters for device Configuration commands.value([‘string’, ‘number’], required): [0x030-0x03b] Arguments/Parameters for device Configuration commands.
reserved2(object): [0x03c-0x03f] Reserved for future use.value([‘string’, ‘number’], required): [0x03c-0x03f] Reserved for future use.
controllerMiscOption(object): [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more details.value([‘string’, ‘number’], required): [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more details.
deviceType(object): [0x044-0x044] Device Type: See Flash Type Definition for more details.value([‘string’, ‘number’], required): [0x044-0x044] Device Type: See Flash Type Definition for more details.
sflashPadType(object): [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal.value([‘string’, ‘number’], required): [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal.
serialClkFreq(object): [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot Chapter for more details.value([‘string’, ‘number’], required): [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot Chapter for more details.
lutCustomSeqEnable(object): [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot be done using 1 LUT sequence, currently, only applicable to HyperFLASH.value([‘string’, ‘number’], required): [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot be done using 1 LUT sequence, currently, only applicable to HyperFLASH.
reserved3_0(object): [0x048-0x04f] Reserved for future use.value([‘string’, ‘number’], required): [0x048-0x04f] Reserved for future use.
reserved3_1(object): [0x048-0x04f] Reserved for future use.value([‘string’, ‘number’], required): [0x048-0x04f] Reserved for future use.
sflashA1Size(object): [0x050-0x053] Size of Flash connected to A1.value([‘string’, ‘number’], required): [0x050-0x053] Size of Flash connected to A1.
sflashA2Size(object): [0x054-0x057] Size of Flash connected to A2.value([‘string’, ‘number’], required): [0x054-0x057] Size of Flash connected to A2.
sflashB1Size(object): [0x058-0x05b] Size of Flash connected to B1.value([‘string’, ‘number’], required): [0x058-0x05b] Size of Flash connected to B1.
sflashB2Size(object): [0x05c-0x05f] Size of Flash connected to B2.value([‘string’, ‘number’], required): [0x05c-0x05f] Size of Flash connected to B2.
csPadSettingOverride(object): [0x060-0x063] CS pad setting override value.value([‘string’, ‘number’], required): [0x060-0x063] CS pad setting override value.
sclkPadSettingOverride(object): [0x064-0x067] SCK pad setting override value.value([‘string’, ‘number’], required): [0x064-0x067] SCK pad setting override value.
dataPadSettingOverride(object): [0x068-0x06b] data pad setting override value.value([‘string’, ‘number’], required): [0x068-0x06b] data pad setting override value.
dqsPadSettingOverride(object): [0x06c-0x06f] DQS pad setting override value.value([‘string’, ‘number’], required): [0x06c-0x06f] DQS pad setting override value.
timeoutInMs(object): [0x070-0x073] Timeout threshold for read status command.value([‘string’, ‘number’], required): [0x070-0x073] Timeout threshold for read status command.
commandInterval(object): [0x074-0x077] CS deselect interval between two commands.value([‘string’, ‘number’], required): [0x074-0x077] CS deselect interval between two commands.
dataValidTime_0(object): [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns.value([‘string’, ‘number’], required): [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns.
dataValidTime_1(object): [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns.value([‘string’, ‘number’], required): [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns.
busyOffset(object): [0x07c-0x07d] Busy offset, valid value: 0-31.value([‘string’, ‘number’], required): [0x07c-0x07d] Busy offset, valid value: 0-31.
busyBitPolarity(object): [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - busy flag is 0 when flash device is busy.value([‘string’, ‘number’], required): [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - busy flag is 0 when flash device is busy.
lookupTable_0(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_1(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_2(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_3(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_4(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_5(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_6(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_7(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_8(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_9(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_10(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_11(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_12(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_13(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_14(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_15(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_16(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_17(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_18(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_19(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_20(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_21(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_22(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_23(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_24(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_25(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_26(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_27(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_28(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_29(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_30(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_31(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_32(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_33(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_34(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_35(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_36(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_37(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_38(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_39(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_40(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_41(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_42(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_43(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_44(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_45(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_46(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_47(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_48(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_49(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_50(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_51(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_52(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_53(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_54(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_55(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_56(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_57(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_58(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_59(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_60(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_61(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_62(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_63(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lutCustomSeq_0(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_1(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_2(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_3(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_4(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_5(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_6(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_7(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_8(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_9(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_10(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_11(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
reserved4_0(object): [0x1b0-0x1bf] Reserved for future use.value([‘string’, ‘number’], required): [0x1b0-0x1bf] Reserved for future use.
reserved4_1(object): [0x1b0-0x1bf] Reserved for future use.value([‘string’, ‘number’], required): [0x1b0-0x1bf] Reserved for future use.
reserved4_2(object): [0x1b0-0x1bf] Reserved for future use.value([‘string’, ‘number’], required): [0x1b0-0x1bf] Reserved for future use.
reserved4_3(object): [0x1b0-0x1bf] Reserved for future use.value([‘string’, ‘number’], required): [0x1b0-0x1bf] Reserved for future use.
pageSize(object): Page size of Serial NOR.value([‘string’, ‘number’], required): Page size of Serial NOR.
sectorSize(object): Sector size of Serial NOR.value([‘string’, ‘number’], required): Sector size of Serial NOR.
ipcmdSerialClkFreq(object): Clock frequency for IP command.value([‘string’, ‘number’], required): Clock frequency for IP command.
isUniformBlockSize(object): Sector/Block size is the same.value([‘string’, ‘number’], required): Sector/Block size is the same.
reserved0_0(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserved0_1(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
serialNorType(object): Serial NOR Flash type: 0/1/2/3.value([‘string’, ‘number’], required): Serial NOR Flash type: 0/1/2/3.
needExitNoCmdMode(object): Need to exit NoCmd mode before other IP command.value([‘string’, ‘number’], required): Need to exit NoCmd mode before other IP command.
halfClkForNonReadCmd(object): Half the Serial Clock for non-read command: true/false.value([‘string’, ‘number’], required): Half the Serial Clock for non-read command: true/false.
needRestoreNoCmdMode(object): Need to Restore NoCmd mode after IP commmand execution.value([‘string’, ‘number’], required): Need to Restore NoCmd mode after IP commmand execution.
blockSize(object): Block size.value([‘string’, ‘number’], required): Block size.
reserve2_0(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_1(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_2(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_3(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_4(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_5(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_6(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_7(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_8(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_9(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_10(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
# =========== FCB template for rt105x and flexspi_nor ===========
# ----------------------------------------------------------------------------------------------------
# == FCB template for rt105x and flexspi_nor ==
# ----------------------------------------------------------------------------------------------------
family: CHOOSE_FROM_TABLE # [Required], MCU family name; Possible options:['lpc55s3x', 'rt101x', 'rt102x', 'rt104x', 'rt105x', 'rt106x', 'rt116x', 'rt117x', 'rt118x', 'rt5xx', 'rt6xx', 'rw61x']
revision: a1 # [Optional], Chip silicon revision; If needed this could be used to specify silicon revision of device; Possible options:['latest']
type: flexspi_nor # [Required], Memory type; Specify type of memory used by FCB description; Possible options:['flexspi_nor']
fcb_settings: # [Required], rt105x
tag: # [Optional], tag; [0x000-0x003] Tag, fixed value 0x42464346UL
value: '0x00000000' # [Required], tag; [0x000-0x003] Tag, fixed value 0x42464346UL
version: # [Optional], version; [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix
value: '0x00000000' # [Required], version; [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix
reserved0: # [Optional], reserved0; [0x008-0x00b] Reserved for future use
value: '0x00000000' # [Required], reserved0; [0x008-0x00b] Reserved for future use
readSampleClkSrc: # [Optional], readSampleClkSrc; [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3
value: '0x00' # [Required], readSampleClkSrc; [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3
csHoldTime: # [Optional], csHoldTime; [0x00d-0x00d] CS hold time, default value: 3
value: '0x00' # [Required], csHoldTime; [0x00d-0x00d] CS hold time, default value: 3
csSetupTime: # [Optional], csSetupTime; [0x00e-0x00e] CS setup time, default value: 3
value: '0x00' # [Required], csSetupTime; [0x00e-0x00e] CS setup time, default value: 3
columnAddressWidth: # [Optional], columnAddressWidth; [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For Serial NAND, need to refer to datasheet
value: '0x00' # [Required], columnAddressWidth; [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For Serial NAND, need to refer to datasheet
deviceModeCfgEnable: # [Optional], deviceModeCfgEnable; [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable
value: '0x00' # [Required], deviceModeCfgEnable; [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable
deviceModeType: # [Optional], deviceModeType; [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, Generic configuration, etc.
value: '0x00' # [Required], deviceModeType; [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, Generic configuration, etc.
waitTimeCfgCommands: # [Optional], waitTimeCfgCommands; [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for DPI/QPI/OPI switch or reset command
value: '0x0000' # [Required], waitTimeCfgCommands; [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for DPI/QPI/OPI switch or reset command
deviceModeSeq: # [Optional], deviceModeSeq; [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt sequence number, [31:16] Reserved
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
deviceModeArg: # [Optional], deviceModeArg; [0x018-0x01b] Argument/Parameter for device configuration
value: '0x00000000' # [Required], deviceModeArg; [0x018-0x01b] Argument/Parameter for device configuration
configCmdEnable: # [Optional], configCmdEnable; [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable
value: '0x00' # [Required], configCmdEnable; [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable
configModeType_0: # [Optional], configModeType_0; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
value: '0x00' # [Required], configModeType_0; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
configModeType_1: # [Optional], configModeType_1; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
value: '0x00' # [Required], configModeType_1; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
configModeType_2: # [Optional], configModeType_2; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
value: '0x00' # [Required], configModeType_2; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
configCmdSeqs_0: # [Optional], configCmdSeqs_0; [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
configCmdSeqs_1: # [Optional], configCmdSeqs_1; [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
configCmdSeqs_2: # [Optional], configCmdSeqs_2; [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
reserved1: # [Optional], reserved1; [0x02c-0x02f] Reserved for future use
value: '0x00000000' # [Required], reserved1; [0x02c-0x02f] Reserved for future use
configCmdArgs_0: # [Optional], configCmdArgs_0; [0x030-0x03b] Arguments/Parameters for device Configuration commands
value: '0x00000000' # [Required], configCmdArgs_0; [0x030-0x03b] Arguments/Parameters for device Configuration commands
configCmdArgs_1: # [Optional], configCmdArgs_1; [0x030-0x03b] Arguments/Parameters for device Configuration commands
value: '0x00000000' # [Required], configCmdArgs_1; [0x030-0x03b] Arguments/Parameters for device Configuration commands
configCmdArgs_2: # [Optional], configCmdArgs_2; [0x030-0x03b] Arguments/Parameters for device Configuration commands
value: '0x00000000' # [Required], configCmdArgs_2; [0x030-0x03b] Arguments/Parameters for device Configuration commands
reserved2: # [Optional], reserved2; [0x03c-0x03f] Reserved for future use
value: '0x00000000' # [Required], reserved2; [0x03c-0x03f] Reserved for future use
controllerMiscOption: # [Optional], controllerMiscOption; [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more details
value: '0x00000000' # [Required], controllerMiscOption; [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more details
deviceType: # [Optional], deviceType; [0x044-0x044] Device Type: See Flash Type Definition for more details
value: '0x00' # [Required], deviceType; [0x044-0x044] Device Type: See Flash Type Definition for more details
sflashPadType: # [Optional], sflashPadType; [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
value: '0x00' # [Required], sflashPadType; [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
serialClkFreq: # [Optional], serialClkFreq; [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot Chapter for more details
value: '0x00' # [Required], serialClkFreq; [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot Chapter for more details
lutCustomSeqEnable: # [Optional], lutCustomSeqEnable; [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot be done using 1 LUT sequence, currently, only applicable to HyperFLASH
value: '0x00' # [Required], lutCustomSeqEnable; [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot be done using 1 LUT sequence, currently, only applicable to HyperFLASH
reserved3_0: # [Optional], reserved3_0; [0x048-0x04f] Reserved for future use
value: '0x00000000' # [Required], reserved3_0; [0x048-0x04f] Reserved for future use
reserved3_1: # [Optional], reserved3_1; [0x048-0x04f] Reserved for future use
value: '0x00000000' # [Required], reserved3_1; [0x048-0x04f] Reserved for future use
sflashA1Size: # [Optional], sflashA1Size; [0x050-0x053] Size of Flash connected to A1
value: '0x00000000' # [Required], sflashA1Size; [0x050-0x053] Size of Flash connected to A1
sflashA2Size: # [Optional], sflashA2Size; [0x054-0x057] Size of Flash connected to A2
value: '0x00000000' # [Required], sflashA2Size; [0x054-0x057] Size of Flash connected to A2
sflashB1Size: # [Optional], sflashB1Size; [0x058-0x05b] Size of Flash connected to B1
value: '0x00000000' # [Required], sflashB1Size; [0x058-0x05b] Size of Flash connected to B1
sflashB2Size: # [Optional], sflashB2Size; [0x05c-0x05f] Size of Flash connected to B2
value: '0x00000000' # [Required], sflashB2Size; [0x05c-0x05f] Size of Flash connected to B2
csPadSettingOverride: # [Optional], csPadSettingOverride; [0x060-0x063] CS pad setting override value
value: '0x00000000' # [Required], csPadSettingOverride; [0x060-0x063] CS pad setting override value
sclkPadSettingOverride: # [Optional], sclkPadSettingOverride; [0x064-0x067] SCK pad setting override value
value: '0x00000000' # [Required], sclkPadSettingOverride; [0x064-0x067] SCK pad setting override value
dataPadSettingOverride: # [Optional], dataPadSettingOverride; [0x068-0x06b] data pad setting override value
value: '0x00000000' # [Required], dataPadSettingOverride; [0x068-0x06b] data pad setting override value
dqsPadSettingOverride: # [Optional], dqsPadSettingOverride; [0x06c-0x06f] DQS pad setting override value
value: '0x00000000' # [Required], dqsPadSettingOverride; [0x06c-0x06f] DQS pad setting override value
timeoutInMs: # [Optional], timeoutInMs; [0x070-0x073] Timeout threshold for read status command
value: '0x00000000' # [Required], timeoutInMs; [0x070-0x073] Timeout threshold for read status command
commandInterval: # [Optional], commandInterval; [0x074-0x077] CS deselect interval between two commands
value: '0x00000000' # [Required], commandInterval; [0x074-0x077] CS deselect interval between two commands
dataValidTime_0: # [Optional], dataValidTime_0; [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
value: '0x0000' # [Required], dataValidTime_0; [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
dataValidTime_1: # [Optional], dataValidTime_1; [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
value: '0x0000' # [Required], dataValidTime_1; [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
busyOffset: # [Optional], busyOffset; [0x07c-0x07d] Busy offset, valid value: 0-31
value: '0x0000' # [Required], busyOffset; [0x07c-0x07d] Busy offset, valid value: 0-31
busyBitPolarity: # [Optional], busyBitPolarity; [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - busy flag is 0 when flash device is busy
value: '0x0000' # [Required], busyBitPolarity; [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - busy flag is 0 when flash device is busy
lookupTable_0: # [Optional], lookupTable_0; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_0; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_1: # [Optional], lookupTable_1; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_1; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_2: # [Optional], lookupTable_2; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_2; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_3: # [Optional], lookupTable_3; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_3; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_4: # [Optional], lookupTable_4; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_4; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_5: # [Optional], lookupTable_5; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_5; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_6: # [Optional], lookupTable_6; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_6; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_7: # [Optional], lookupTable_7; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_7; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_8: # [Optional], lookupTable_8; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_8; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_9: # [Optional], lookupTable_9; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_9; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_10: # [Optional], lookupTable_10; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_10; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_11: # [Optional], lookupTable_11; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_11; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_12: # [Optional], lookupTable_12; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_12; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_13: # [Optional], lookupTable_13; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_13; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_14: # [Optional], lookupTable_14; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_14; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_15: # [Optional], lookupTable_15; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_15; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_16: # [Optional], lookupTable_16; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_16; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_17: # [Optional], lookupTable_17; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_17; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_18: # [Optional], lookupTable_18; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_18; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_19: # [Optional], lookupTable_19; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_19; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_20: # [Optional], lookupTable_20; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_20; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_21: # [Optional], lookupTable_21; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_21; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_22: # [Optional], lookupTable_22; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_22; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_23: # [Optional], lookupTable_23; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_23; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_24: # [Optional], lookupTable_24; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_24; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_25: # [Optional], lookupTable_25; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_25; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_26: # [Optional], lookupTable_26; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_26; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_27: # [Optional], lookupTable_27; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_27; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_28: # [Optional], lookupTable_28; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_28; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_29: # [Optional], lookupTable_29; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_29; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_30: # [Optional], lookupTable_30; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_30; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_31: # [Optional], lookupTable_31; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_31; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_32: # [Optional], lookupTable_32; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_32; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_33: # [Optional], lookupTable_33; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_33; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_34: # [Optional], lookupTable_34; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_34; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_35: # [Optional], lookupTable_35; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_35; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_36: # [Optional], lookupTable_36; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_36; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_37: # [Optional], lookupTable_37; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_37; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_38: # [Optional], lookupTable_38; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_38; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_39: # [Optional], lookupTable_39; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_39; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_40: # [Optional], lookupTable_40; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_40; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_41: # [Optional], lookupTable_41; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_41; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_42: # [Optional], lookupTable_42; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_42; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_43: # [Optional], lookupTable_43; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_43; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_44: # [Optional], lookupTable_44; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_44; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_45: # [Optional], lookupTable_45; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_45; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_46: # [Optional], lookupTable_46; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_46; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_47: # [Optional], lookupTable_47; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_47; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_48: # [Optional], lookupTable_48; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_48; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_49: # [Optional], lookupTable_49; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_49; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_50: # [Optional], lookupTable_50; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_50; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_51: # [Optional], lookupTable_51; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_51; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_52: # [Optional], lookupTable_52; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_52; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_53: # [Optional], lookupTable_53; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_53; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_54: # [Optional], lookupTable_54; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_54; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_55: # [Optional], lookupTable_55; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_55; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_56: # [Optional], lookupTable_56; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_56; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_57: # [Optional], lookupTable_57; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_57; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_58: # [Optional], lookupTable_58; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_58; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_59: # [Optional], lookupTable_59; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_59; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_60: # [Optional], lookupTable_60; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_60; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_61: # [Optional], lookupTable_61; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_61; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_62: # [Optional], lookupTable_62; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_62; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_63: # [Optional], lookupTable_63; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_63; [0x080-0x17f] Lookup table holds Flash command sequences
lutCustomSeq_0: # [Optional], lutCustomSeq_0; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_1: # [Optional], lutCustomSeq_1; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_2: # [Optional], lutCustomSeq_2; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_3: # [Optional], lutCustomSeq_3; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_4: # [Optional], lutCustomSeq_4; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_5: # [Optional], lutCustomSeq_5; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_6: # [Optional], lutCustomSeq_6; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_7: # [Optional], lutCustomSeq_7; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_8: # [Optional], lutCustomSeq_8; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_9: # [Optional], lutCustomSeq_9; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_10: # [Optional], lutCustomSeq_10; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_11: # [Optional], lutCustomSeq_11; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
reserved4_0: # [Optional], reserved4_0; [0x1b0-0x1bf] Reserved for future use
value: '0x00000000' # [Required], reserved4_0; [0x1b0-0x1bf] Reserved for future use
reserved4_1: # [Optional], reserved4_1; [0x1b0-0x1bf] Reserved for future use
value: '0x00000000' # [Required], reserved4_1; [0x1b0-0x1bf] Reserved for future use
reserved4_2: # [Optional], reserved4_2; [0x1b0-0x1bf] Reserved for future use
value: '0x00000000' # [Required], reserved4_2; [0x1b0-0x1bf] Reserved for future use
reserved4_3: # [Optional], reserved4_3; [0x1b0-0x1bf] Reserved for future use
value: '0x00000000' # [Required], reserved4_3; [0x1b0-0x1bf] Reserved for future use
pageSize: # [Optional], pageSize; Page size of Serial NOR
value: '0x00000000' # [Required], pageSize; Page size of Serial NOR
sectorSize: # [Optional], sectorSize; Sector size of Serial NOR
value: '0x00000000' # [Required], sectorSize; Sector size of Serial NOR
ipcmdSerialClkFreq: # [Optional], ipcmdSerialClkFreq; Clock frequency for IP command
value: '0x00' # [Required], ipcmdSerialClkFreq; Clock frequency for IP command
isUniformBlockSize: # [Optional], isUniformBlockSize; Sector/Block size is the same
value: '0x00' # [Required], isUniformBlockSize; Sector/Block size is the same
reserved0_0: # [Optional], reserved0_0; Reserved for future use
value: '0x00' # [Required], reserved0_0; Reserved for future use
reserved0_1: # [Optional], reserved0_1; Reserved for future use
value: '0x00' # [Required], reserved0_1; Reserved for future use
serialNorType: # [Optional], serialNorType; Serial NOR Flash type: 0/1/2/3
value: '0x00' # [Required], serialNorType; Serial NOR Flash type: 0/1/2/3
needExitNoCmdMode: # [Optional], needExitNoCmdMode; Need to exit NoCmd mode before other IP command
value: '0x00' # [Required], needExitNoCmdMode; Need to exit NoCmd mode before other IP command
halfClkForNonReadCmd: # [Optional], halfClkForNonReadCmd; Half the Serial Clock for non-read command: true/false
value: '0x00' # [Required], halfClkForNonReadCmd; Half the Serial Clock for non-read command: true/false
needRestoreNoCmdMode: # [Optional], needRestoreNoCmdMode; Need to Restore NoCmd mode after IP commmand execution
value: '0x00' # [Required], needRestoreNoCmdMode; Need to Restore NoCmd mode after IP commmand execution
blockSize: # [Optional], blockSize; Block size
value: '0x00000000' # [Required], blockSize; Block size
reserve2_0: # [Optional], reserve2_0; Reserved for future use
value: '0x00000000' # [Required], reserve2_0; Reserved for future use
reserve2_1: # [Optional], reserve2_1; Reserved for future use
value: '0x00000000' # [Required], reserve2_1; Reserved for future use
reserve2_2: # [Optional], reserve2_2; Reserved for future use
value: '0x00000000' # [Required], reserve2_2; Reserved for future use
reserve2_3: # [Optional], reserve2_3; Reserved for future use
value: '0x00000000' # [Required], reserve2_3; Reserved for future use
reserve2_4: # [Optional], reserve2_4; Reserved for future use
value: '0x00000000' # [Required], reserve2_4; Reserved for future use
reserve2_5: # [Optional], reserve2_5; Reserved for future use
value: '0x00000000' # [Required], reserve2_5; Reserved for future use
reserve2_6: # [Optional], reserve2_6; Reserved for future use
value: '0x00000000' # [Required], reserve2_6; Reserved for future use
reserve2_7: # [Optional], reserve2_7; Reserved for future use
value: '0x00000000' # [Required], reserve2_7; Reserved for future use
reserve2_8: # [Optional], reserve2_8; Reserved for future use
value: '0x00000000' # [Required], reserve2_8; Reserved for future use
reserve2_9: # [Optional], reserve2_9; Reserved for future use
value: '0x00000000' # [Required], reserve2_9; Reserved for future use
reserve2_10: # [Optional], reserve2_10; Reserved for future use
value: '0x00000000' # [Required], reserve2_10; Reserved for future use
FCB template for rt106x and flexspi_nor
family(string): MCU family name. Must be one of:["lpc55s3x", "rt101x", "rt102x", "rt104x", "rt105x", "rt106x", "rt116x", "rt117x", "rt118x", "rt5xx", "rt6xx", "rw61x"].revision(string): If needed this could be used to specify silicon revision of device. Must be one of:["latest"].type(string): Specify type of memory used by FCB description. Must be one of:["flexspi_nor"].fcb_settings(object)tag(object): [0x000-0x003] Tag, fixed value 0x42464346UL.value([‘string’, ‘number’], required): [0x000-0x003] Tag, fixed value 0x42464346UL.
version(object): [0x004-0x007] Version,[31:24] -‘V’, [23:16] - Major, [15:8] - Minor, [7:0] - bugfix.value([‘string’, ‘number’], required): [0x004-0x007] Version,[31:24] -‘V’, [23:16] - Major, [15:8] - Minor, [7:0] - bugfix.
reserved0(object): [0x008-0x00b] Reserved for future use.value([‘string’, ‘number’], required): [0x008-0x00b] Reserved for future use.
readSampleClkSrc(object): [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3.value([‘string’, ‘number’], required): [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3.
csHoldTime(object): [0x00d-0x00d] CS hold time, default value: 3.value([‘string’, ‘number’], required): [0x00d-0x00d] CS hold time, default value: 3.
csSetupTime(object): [0x00e-0x00e] CS setup time, default value: 3.value([‘string’, ‘number’], required): [0x00e-0x00e] CS setup time, default value: 3.
columnAddressWidth(object): [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For Serial NAND, need to refer to datasheet.value([‘string’, ‘number’], required): [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For Serial NAND, need to refer to datasheet.
deviceModeCfgEnable(object): [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable.value([‘string’, ‘number’], required): [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable.
deviceModeType(object): [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, Generic configuration, etc.value([‘string’, ‘number’], required): [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, Generic configuration, etc.
waitTimeCfgCommands(object): [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for DPI/QPI/OPI switch or reset command.value([‘string’, ‘number’], required): [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for DPI/QPI/OPI switch or reset command.
deviceModeSeq(object): [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt sequence number, [31:16] Reserved.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
deviceModeArg(object): [0x018-0x01b] Argument/Parameter for device configuration.value([‘string’, ‘number’], required): [0x018-0x01b] Argument/Parameter for device configuration.
configCmdEnable(object): [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable.value([‘string’, ‘number’], required): [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable.
configModeType_0(object): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe.value([‘string’, ‘number’], required): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe.
configModeType_1(object): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe.value([‘string’, ‘number’], required): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe.
configModeType_2(object): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe.value([‘string’, ‘number’], required): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe.
configCmdSeqs_0(object): [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
configCmdSeqs_1(object): [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
configCmdSeqs_2(object): [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
reserved1(object): [0x02c-0x02f] Reserved for future use.value([‘string’, ‘number’], required): [0x02c-0x02f] Reserved for future use.
configCmdArgs_0(object): [0x030-0x03b] Arguments/Parameters for device Configuration commands.value([‘string’, ‘number’], required): [0x030-0x03b] Arguments/Parameters for device Configuration commands.
configCmdArgs_1(object): [0x030-0x03b] Arguments/Parameters for device Configuration commands.value([‘string’, ‘number’], required): [0x030-0x03b] Arguments/Parameters for device Configuration commands.
configCmdArgs_2(object): [0x030-0x03b] Arguments/Parameters for device Configuration commands.value([‘string’, ‘number’], required): [0x030-0x03b] Arguments/Parameters for device Configuration commands.
reserved2(object): [0x03c-0x03f] Reserved for future use.value([‘string’, ‘number’], required): [0x03c-0x03f] Reserved for future use.
controllerMiscOption(object): [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more details.value([‘string’, ‘number’], required): [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more details.
deviceType(object): [0x044-0x044] Device Type: See Flash Type Definition for more details.value([‘string’, ‘number’], required): [0x044-0x044] Device Type: See Flash Type Definition for more details.
sflashPadType(object): [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal.value([‘string’, ‘number’], required): [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal.
serialClkFreq(object): [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot Chapter for more details.value([‘string’, ‘number’], required): [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot Chapter for more details.
lutCustomSeqEnable(object): [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot be done using 1 LUT sequence, currently, only applicable to HyperFLASH.value([‘string’, ‘number’], required): [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot be done using 1 LUT sequence, currently, only applicable to HyperFLASH.
reserved3_0(object): [0x048-0x04f] Reserved for future use.value([‘string’, ‘number’], required): [0x048-0x04f] Reserved for future use.
reserved3_1(object): [0x048-0x04f] Reserved for future use.value([‘string’, ‘number’], required): [0x048-0x04f] Reserved for future use.
sflashA1Size(object): [0x050-0x053] Size of Flash connected to A1.value([‘string’, ‘number’], required): [0x050-0x053] Size of Flash connected to A1.
sflashA2Size(object): [0x054-0x057] Size of Flash connected to A2.value([‘string’, ‘number’], required): [0x054-0x057] Size of Flash connected to A2.
sflashB1Size(object): [0x058-0x05b] Size of Flash connected to B1.value([‘string’, ‘number’], required): [0x058-0x05b] Size of Flash connected to B1.
sflashB2Size(object): [0x05c-0x05f] Size of Flash connected to B2.value([‘string’, ‘number’], required): [0x05c-0x05f] Size of Flash connected to B2.
csPadSettingOverride(object): [0x060-0x063] CS pad setting override value.value([‘string’, ‘number’], required): [0x060-0x063] CS pad setting override value.
sclkPadSettingOverride(object): [0x064-0x067] SCK pad setting override value.value([‘string’, ‘number’], required): [0x064-0x067] SCK pad setting override value.
dataPadSettingOverride(object): [0x068-0x06b] data pad setting override value.value([‘string’, ‘number’], required): [0x068-0x06b] data pad setting override value.
dqsPadSettingOverride(object): [0x06c-0x06f] DQS pad setting override value.value([‘string’, ‘number’], required): [0x06c-0x06f] DQS pad setting override value.
timeoutInMs(object): [0x070-0x073] Timeout threshold for read status command.value([‘string’, ‘number’], required): [0x070-0x073] Timeout threshold for read status command.
commandInterval(object): [0x074-0x077] CS deselect interval between two commands.value([‘string’, ‘number’], required): [0x074-0x077] CS deselect interval between two commands.
dataValidTime_0(object): [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns.value([‘string’, ‘number’], required): [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns.
dataValidTime_1(object): [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns.value([‘string’, ‘number’], required): [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns.
busyOffset(object): [0x07c-0x07d] Busy offset, valid value: 0-31.value([‘string’, ‘number’], required): [0x07c-0x07d] Busy offset, valid value: 0-31.
busyBitPolarity(object): [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - busy flag is 0 when flash device is busy.value([‘string’, ‘number’], required): [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - busy flag is 0 when flash device is busy.
lookupTable_0(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_1(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_2(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_3(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_4(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_5(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_6(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_7(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_8(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_9(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_10(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_11(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_12(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_13(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_14(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_15(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_16(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_17(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_18(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_19(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_20(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_21(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_22(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_23(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_24(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_25(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_26(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_27(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_28(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_29(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_30(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_31(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_32(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_33(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_34(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_35(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_36(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_37(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_38(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_39(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_40(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_41(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_42(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_43(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_44(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_45(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_46(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_47(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_48(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_49(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_50(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_51(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_52(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_53(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_54(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_55(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_56(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_57(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_58(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_59(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_60(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_61(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_62(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_63(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lutCustomSeq_0(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_1(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_2(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_3(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_4(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_5(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_6(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_7(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_8(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_9(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_10(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_11(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
reserved4_0(object): [0x1b0-0x1bf] Reserved for future use.value([‘string’, ‘number’], required): [0x1b0-0x1bf] Reserved for future use.
reserved4_1(object): [0x1b0-0x1bf] Reserved for future use.value([‘string’, ‘number’], required): [0x1b0-0x1bf] Reserved for future use.
reserved4_2(object): [0x1b0-0x1bf] Reserved for future use.value([‘string’, ‘number’], required): [0x1b0-0x1bf] Reserved for future use.
reserved4_3(object): [0x1b0-0x1bf] Reserved for future use.value([‘string’, ‘number’], required): [0x1b0-0x1bf] Reserved for future use.
pageSize(object): Page size of Serial NOR.value([‘string’, ‘number’], required): Page size of Serial NOR.
sectorSize(object): Sector size of Serial NOR.value([‘string’, ‘number’], required): Sector size of Serial NOR.
ipcmdSerialClkFreq(object): Clock frequency for IP command.value([‘string’, ‘number’], required): Clock frequency for IP command.
isUniformBlockSize(object): Sector/Block size is the same.value([‘string’, ‘number’], required): Sector/Block size is the same.
reserved0_0(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserved0_1(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
serialNorType(object): Serial NOR Flash type: 0/1/2/3.value([‘string’, ‘number’], required): Serial NOR Flash type: 0/1/2/3.
needExitNoCmdMode(object): Need to exit NoCmd mode before other IP command.value([‘string’, ‘number’], required): Need to exit NoCmd mode before other IP command.
halfClkForNonReadCmd(object): Half the Serial Clock for non-read command: true/false.value([‘string’, ‘number’], required): Half the Serial Clock for non-read command: true/false.
needRestoreNoCmdMode(object): Need to Restore NoCmd mode after IP commmand execution.value([‘string’, ‘number’], required): Need to Restore NoCmd mode after IP commmand execution.
blockSize(object): Block size.value([‘string’, ‘number’], required): Block size.
reserve2_0(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_1(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_2(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_3(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_4(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_5(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_6(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_7(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_8(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_9(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_10(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
# =========== FCB template for rt106x and flexspi_nor ===========
# ----------------------------------------------------------------------------------------------------
# == FCB template for rt106x and flexspi_nor ==
# ----------------------------------------------------------------------------------------------------
family: CHOOSE_FROM_TABLE # [Required], MCU family name; Possible options:['lpc55s3x', 'rt101x', 'rt102x', 'rt104x', 'rt105x', 'rt106x', 'rt116x', 'rt117x', 'rt118x', 'rt5xx', 'rt6xx', 'rw61x']
revision: a1 # [Optional], Chip silicon revision; If needed this could be used to specify silicon revision of device; Possible options:['latest']
type: flexspi_nor # [Required], Memory type; Specify type of memory used by FCB description; Possible options:['flexspi_nor']
fcb_settings: # [Required], rt106x
tag: # [Optional], tag; [0x000-0x003] Tag, fixed value 0x42464346UL
value: '0x00000000' # [Required], tag; [0x000-0x003] Tag, fixed value 0x42464346UL
version: # [Optional], version; [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix
value: '0x00000000' # [Required], version; [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix
reserved0: # [Optional], reserved0; [0x008-0x00b] Reserved for future use
value: '0x00000000' # [Required], reserved0; [0x008-0x00b] Reserved for future use
readSampleClkSrc: # [Optional], readSampleClkSrc; [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3
value: '0x00' # [Required], readSampleClkSrc; [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3
csHoldTime: # [Optional], csHoldTime; [0x00d-0x00d] CS hold time, default value: 3
value: '0x00' # [Required], csHoldTime; [0x00d-0x00d] CS hold time, default value: 3
csSetupTime: # [Optional], csSetupTime; [0x00e-0x00e] CS setup time, default value: 3
value: '0x00' # [Required], csSetupTime; [0x00e-0x00e] CS setup time, default value: 3
columnAddressWidth: # [Optional], columnAddressWidth; [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For Serial NAND, need to refer to datasheet
value: '0x00' # [Required], columnAddressWidth; [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For Serial NAND, need to refer to datasheet
deviceModeCfgEnable: # [Optional], deviceModeCfgEnable; [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable
value: '0x00' # [Required], deviceModeCfgEnable; [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable
deviceModeType: # [Optional], deviceModeType; [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, Generic configuration, etc.
value: '0x00' # [Required], deviceModeType; [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, Generic configuration, etc.
waitTimeCfgCommands: # [Optional], waitTimeCfgCommands; [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for DPI/QPI/OPI switch or reset command
value: '0x0000' # [Required], waitTimeCfgCommands; [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for DPI/QPI/OPI switch or reset command
deviceModeSeq: # [Optional], deviceModeSeq; [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt sequence number, [31:16] Reserved
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
deviceModeArg: # [Optional], deviceModeArg; [0x018-0x01b] Argument/Parameter for device configuration
value: '0x00000000' # [Required], deviceModeArg; [0x018-0x01b] Argument/Parameter for device configuration
configCmdEnable: # [Optional], configCmdEnable; [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable
value: '0x00' # [Required], configCmdEnable; [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable
configModeType_0: # [Optional], configModeType_0; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
value: '0x00' # [Required], configModeType_0; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
configModeType_1: # [Optional], configModeType_1; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
value: '0x00' # [Required], configModeType_1; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
configModeType_2: # [Optional], configModeType_2; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
value: '0x00' # [Required], configModeType_2; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
configCmdSeqs_0: # [Optional], configCmdSeqs_0; [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
configCmdSeqs_1: # [Optional], configCmdSeqs_1; [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
configCmdSeqs_2: # [Optional], configCmdSeqs_2; [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
reserved1: # [Optional], reserved1; [0x02c-0x02f] Reserved for future use
value: '0x00000000' # [Required], reserved1; [0x02c-0x02f] Reserved for future use
configCmdArgs_0: # [Optional], configCmdArgs_0; [0x030-0x03b] Arguments/Parameters for device Configuration commands
value: '0x00000000' # [Required], configCmdArgs_0; [0x030-0x03b] Arguments/Parameters for device Configuration commands
configCmdArgs_1: # [Optional], configCmdArgs_1; [0x030-0x03b] Arguments/Parameters for device Configuration commands
value: '0x00000000' # [Required], configCmdArgs_1; [0x030-0x03b] Arguments/Parameters for device Configuration commands
configCmdArgs_2: # [Optional], configCmdArgs_2; [0x030-0x03b] Arguments/Parameters for device Configuration commands
value: '0x00000000' # [Required], configCmdArgs_2; [0x030-0x03b] Arguments/Parameters for device Configuration commands
reserved2: # [Optional], reserved2; [0x03c-0x03f] Reserved for future use
value: '0x00000000' # [Required], reserved2; [0x03c-0x03f] Reserved for future use
controllerMiscOption: # [Optional], controllerMiscOption; [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more details
value: '0x00000000' # [Required], controllerMiscOption; [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more details
deviceType: # [Optional], deviceType; [0x044-0x044] Device Type: See Flash Type Definition for more details
value: '0x00' # [Required], deviceType; [0x044-0x044] Device Type: See Flash Type Definition for more details
sflashPadType: # [Optional], sflashPadType; [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
value: '0x00' # [Required], sflashPadType; [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
serialClkFreq: # [Optional], serialClkFreq; [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot Chapter for more details
value: '0x00' # [Required], serialClkFreq; [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot Chapter for more details
lutCustomSeqEnable: # [Optional], lutCustomSeqEnable; [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot be done using 1 LUT sequence, currently, only applicable to HyperFLASH
value: '0x00' # [Required], lutCustomSeqEnable; [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot be done using 1 LUT sequence, currently, only applicable to HyperFLASH
reserved3_0: # [Optional], reserved3_0; [0x048-0x04f] Reserved for future use
value: '0x00000000' # [Required], reserved3_0; [0x048-0x04f] Reserved for future use
reserved3_1: # [Optional], reserved3_1; [0x048-0x04f] Reserved for future use
value: '0x00000000' # [Required], reserved3_1; [0x048-0x04f] Reserved for future use
sflashA1Size: # [Optional], sflashA1Size; [0x050-0x053] Size of Flash connected to A1
value: '0x00000000' # [Required], sflashA1Size; [0x050-0x053] Size of Flash connected to A1
sflashA2Size: # [Optional], sflashA2Size; [0x054-0x057] Size of Flash connected to A2
value: '0x00000000' # [Required], sflashA2Size; [0x054-0x057] Size of Flash connected to A2
sflashB1Size: # [Optional], sflashB1Size; [0x058-0x05b] Size of Flash connected to B1
value: '0x00000000' # [Required], sflashB1Size; [0x058-0x05b] Size of Flash connected to B1
sflashB2Size: # [Optional], sflashB2Size; [0x05c-0x05f] Size of Flash connected to B2
value: '0x00000000' # [Required], sflashB2Size; [0x05c-0x05f] Size of Flash connected to B2
csPadSettingOverride: # [Optional], csPadSettingOverride; [0x060-0x063] CS pad setting override value
value: '0x00000000' # [Required], csPadSettingOverride; [0x060-0x063] CS pad setting override value
sclkPadSettingOverride: # [Optional], sclkPadSettingOverride; [0x064-0x067] SCK pad setting override value
value: '0x00000000' # [Required], sclkPadSettingOverride; [0x064-0x067] SCK pad setting override value
dataPadSettingOverride: # [Optional], dataPadSettingOverride; [0x068-0x06b] data pad setting override value
value: '0x00000000' # [Required], dataPadSettingOverride; [0x068-0x06b] data pad setting override value
dqsPadSettingOverride: # [Optional], dqsPadSettingOverride; [0x06c-0x06f] DQS pad setting override value
value: '0x00000000' # [Required], dqsPadSettingOverride; [0x06c-0x06f] DQS pad setting override value
timeoutInMs: # [Optional], timeoutInMs; [0x070-0x073] Timeout threshold for read status command
value: '0x00000000' # [Required], timeoutInMs; [0x070-0x073] Timeout threshold for read status command
commandInterval: # [Optional], commandInterval; [0x074-0x077] CS deselect interval between two commands
value: '0x00000000' # [Required], commandInterval; [0x074-0x077] CS deselect interval between two commands
dataValidTime_0: # [Optional], dataValidTime_0; [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
value: '0x0000' # [Required], dataValidTime_0; [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
dataValidTime_1: # [Optional], dataValidTime_1; [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
value: '0x0000' # [Required], dataValidTime_1; [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
busyOffset: # [Optional], busyOffset; [0x07c-0x07d] Busy offset, valid value: 0-31
value: '0x0000' # [Required], busyOffset; [0x07c-0x07d] Busy offset, valid value: 0-31
busyBitPolarity: # [Optional], busyBitPolarity; [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - busy flag is 0 when flash device is busy
value: '0x0000' # [Required], busyBitPolarity; [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - busy flag is 0 when flash device is busy
lookupTable_0: # [Optional], lookupTable_0; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_0; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_1: # [Optional], lookupTable_1; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_1; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_2: # [Optional], lookupTable_2; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_2; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_3: # [Optional], lookupTable_3; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_3; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_4: # [Optional], lookupTable_4; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_4; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_5: # [Optional], lookupTable_5; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_5; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_6: # [Optional], lookupTable_6; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_6; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_7: # [Optional], lookupTable_7; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_7; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_8: # [Optional], lookupTable_8; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_8; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_9: # [Optional], lookupTable_9; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_9; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_10: # [Optional], lookupTable_10; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_10; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_11: # [Optional], lookupTable_11; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_11; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_12: # [Optional], lookupTable_12; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_12; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_13: # [Optional], lookupTable_13; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_13; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_14: # [Optional], lookupTable_14; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_14; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_15: # [Optional], lookupTable_15; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_15; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_16: # [Optional], lookupTable_16; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_16; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_17: # [Optional], lookupTable_17; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_17; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_18: # [Optional], lookupTable_18; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_18; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_19: # [Optional], lookupTable_19; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_19; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_20: # [Optional], lookupTable_20; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_20; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_21: # [Optional], lookupTable_21; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_21; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_22: # [Optional], lookupTable_22; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_22; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_23: # [Optional], lookupTable_23; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_23; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_24: # [Optional], lookupTable_24; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_24; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_25: # [Optional], lookupTable_25; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_25; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_26: # [Optional], lookupTable_26; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_26; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_27: # [Optional], lookupTable_27; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_27; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_28: # [Optional], lookupTable_28; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_28; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_29: # [Optional], lookupTable_29; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_29; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_30: # [Optional], lookupTable_30; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_30; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_31: # [Optional], lookupTable_31; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_31; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_32: # [Optional], lookupTable_32; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_32; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_33: # [Optional], lookupTable_33; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_33; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_34: # [Optional], lookupTable_34; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_34; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_35: # [Optional], lookupTable_35; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_35; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_36: # [Optional], lookupTable_36; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_36; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_37: # [Optional], lookupTable_37; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_37; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_38: # [Optional], lookupTable_38; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_38; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_39: # [Optional], lookupTable_39; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_39; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_40: # [Optional], lookupTable_40; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_40; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_41: # [Optional], lookupTable_41; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_41; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_42: # [Optional], lookupTable_42; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_42; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_43: # [Optional], lookupTable_43; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_43; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_44: # [Optional], lookupTable_44; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_44; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_45: # [Optional], lookupTable_45; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_45; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_46: # [Optional], lookupTable_46; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_46; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_47: # [Optional], lookupTable_47; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_47; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_48: # [Optional], lookupTable_48; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_48; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_49: # [Optional], lookupTable_49; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_49; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_50: # [Optional], lookupTable_50; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_50; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_51: # [Optional], lookupTable_51; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_51; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_52: # [Optional], lookupTable_52; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_52; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_53: # [Optional], lookupTable_53; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_53; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_54: # [Optional], lookupTable_54; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_54; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_55: # [Optional], lookupTable_55; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_55; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_56: # [Optional], lookupTable_56; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_56; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_57: # [Optional], lookupTable_57; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_57; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_58: # [Optional], lookupTable_58; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_58; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_59: # [Optional], lookupTable_59; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_59; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_60: # [Optional], lookupTable_60; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_60; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_61: # [Optional], lookupTable_61; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_61; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_62: # [Optional], lookupTable_62; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_62; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_63: # [Optional], lookupTable_63; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_63; [0x080-0x17f] Lookup table holds Flash command sequences
lutCustomSeq_0: # [Optional], lutCustomSeq_0; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_1: # [Optional], lutCustomSeq_1; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_2: # [Optional], lutCustomSeq_2; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_3: # [Optional], lutCustomSeq_3; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_4: # [Optional], lutCustomSeq_4; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_5: # [Optional], lutCustomSeq_5; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_6: # [Optional], lutCustomSeq_6; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_7: # [Optional], lutCustomSeq_7; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_8: # [Optional], lutCustomSeq_8; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_9: # [Optional], lutCustomSeq_9; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_10: # [Optional], lutCustomSeq_10; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_11: # [Optional], lutCustomSeq_11; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
reserved4_0: # [Optional], reserved4_0; [0x1b0-0x1bf] Reserved for future use
value: '0x00000000' # [Required], reserved4_0; [0x1b0-0x1bf] Reserved for future use
reserved4_1: # [Optional], reserved4_1; [0x1b0-0x1bf] Reserved for future use
value: '0x00000000' # [Required], reserved4_1; [0x1b0-0x1bf] Reserved for future use
reserved4_2: # [Optional], reserved4_2; [0x1b0-0x1bf] Reserved for future use
value: '0x00000000' # [Required], reserved4_2; [0x1b0-0x1bf] Reserved for future use
reserved4_3: # [Optional], reserved4_3; [0x1b0-0x1bf] Reserved for future use
value: '0x00000000' # [Required], reserved4_3; [0x1b0-0x1bf] Reserved for future use
pageSize: # [Optional], pageSize; Page size of Serial NOR
value: '0x00000000' # [Required], pageSize; Page size of Serial NOR
sectorSize: # [Optional], sectorSize; Sector size of Serial NOR
value: '0x00000000' # [Required], sectorSize; Sector size of Serial NOR
ipcmdSerialClkFreq: # [Optional], ipcmdSerialClkFreq; Clock frequency for IP command
value: '0x00' # [Required], ipcmdSerialClkFreq; Clock frequency for IP command
isUniformBlockSize: # [Optional], isUniformBlockSize; Sector/Block size is the same
value: '0x00' # [Required], isUniformBlockSize; Sector/Block size is the same
reserved0_0: # [Optional], reserved0_0; Reserved for future use
value: '0x00' # [Required], reserved0_0; Reserved for future use
reserved0_1: # [Optional], reserved0_1; Reserved for future use
value: '0x00' # [Required], reserved0_1; Reserved for future use
serialNorType: # [Optional], serialNorType; Serial NOR Flash type: 0/1/2/3
value: '0x00' # [Required], serialNorType; Serial NOR Flash type: 0/1/2/3
needExitNoCmdMode: # [Optional], needExitNoCmdMode; Need to exit NoCmd mode before other IP command
value: '0x00' # [Required], needExitNoCmdMode; Need to exit NoCmd mode before other IP command
halfClkForNonReadCmd: # [Optional], halfClkForNonReadCmd; Half the Serial Clock for non-read command: true/false
value: '0x00' # [Required], halfClkForNonReadCmd; Half the Serial Clock for non-read command: true/false
needRestoreNoCmdMode: # [Optional], needRestoreNoCmdMode; Need to Restore NoCmd mode after IP commmand execution
value: '0x00' # [Required], needRestoreNoCmdMode; Need to Restore NoCmd mode after IP commmand execution
blockSize: # [Optional], blockSize; Block size
value: '0x00000000' # [Required], blockSize; Block size
reserve2_0: # [Optional], reserve2_0; Reserved for future use
value: '0x00000000' # [Required], reserve2_0; Reserved for future use
reserve2_1: # [Optional], reserve2_1; Reserved for future use
value: '0x00000000' # [Required], reserve2_1; Reserved for future use
reserve2_2: # [Optional], reserve2_2; Reserved for future use
value: '0x00000000' # [Required], reserve2_2; Reserved for future use
reserve2_3: # [Optional], reserve2_3; Reserved for future use
value: '0x00000000' # [Required], reserve2_3; Reserved for future use
reserve2_4: # [Optional], reserve2_4; Reserved for future use
value: '0x00000000' # [Required], reserve2_4; Reserved for future use
reserve2_5: # [Optional], reserve2_5; Reserved for future use
value: '0x00000000' # [Required], reserve2_5; Reserved for future use
reserve2_6: # [Optional], reserve2_6; Reserved for future use
value: '0x00000000' # [Required], reserve2_6; Reserved for future use
reserve2_7: # [Optional], reserve2_7; Reserved for future use
value: '0x00000000' # [Required], reserve2_7; Reserved for future use
reserve2_8: # [Optional], reserve2_8; Reserved for future use
value: '0x00000000' # [Required], reserve2_8; Reserved for future use
reserve2_9: # [Optional], reserve2_9; Reserved for future use
value: '0x00000000' # [Required], reserve2_9; Reserved for future use
reserve2_10: # [Optional], reserve2_10; Reserved for future use
value: '0x00000000' # [Required], reserve2_10; Reserved for future use
FCB template for rt116x and flexspi_nor
family(string): MCU family name. Must be one of:["lpc55s3x", "rt101x", "rt102x", "rt104x", "rt105x", "rt106x", "rt116x", "rt117x", "rt118x", "rt5xx", "rt6xx", "rw61x"].revision(string): If needed this could be used to specify silicon revision of device. Must be one of:["latest"].type(string): Specify type of memory used by FCB description. Must be one of:["flexspi_nor"].fcb_settings(object)tag(object): [0x000-0x003] Tag, fixed value 0x42464346UL.value([‘string’, ‘number’], required): [0x000-0x003] Tag, fixed value 0x42464346UL.
version(object): [0x004-0x007] Version,[31:24] -‘V’, [23:16] - Major, [15:8] - Minor, [7:0] - bugfix.value([‘string’, ‘number’], required): [0x004-0x007] Version,[31:24] -‘V’, [23:16] - Major, [15:8] - Minor, [7:0] - bugfix.
reserved0(object): [0x008-0x00b] Reserved for future use.value([‘string’, ‘number’], required): [0x008-0x00b] Reserved for future use.
readSampleClkSrc(object): [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3.value([‘string’, ‘number’], required): [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3.
csHoldTime(object): [0x00d-0x00d] CS hold time, default value: 3.value([‘string’, ‘number’], required): [0x00d-0x00d] CS hold time, default value: 3.
csSetupTime(object): [0x00e-0x00e] CS setup time, default value: 3.value([‘string’, ‘number’], required): [0x00e-0x00e] CS setup time, default value: 3.
columnAddressWidth(object): [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For Serial NAND, need to refer to datasheet.value([‘string’, ‘number’], required): [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For Serial NAND, need to refer to datasheet.
deviceModeCfgEnable(object): [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable.value([‘string’, ‘number’], required): [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable.
deviceModeType(object): [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, Generic configuration, etc.value([‘string’, ‘number’], required): [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, Generic configuration, etc.
waitTimeCfgCommands(object): [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for DPI/QPI/OPI switch or reset command.value([‘string’, ‘number’], required): [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for DPI/QPI/OPI switch or reset command.
deviceModeSeq(object): [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt sequence number, [31:16] Reserved.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
deviceModeArg(object): [0x018-0x01b] Argument/Parameter for device configuration.value([‘string’, ‘number’], required): [0x018-0x01b] Argument/Parameter for device configuration.
configCmdEnable(object): [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable.value([‘string’, ‘number’], required): [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable.
configModeType_0(object): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe.value([‘string’, ‘number’], required): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe.
configModeType_1(object): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe.value([‘string’, ‘number’], required): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe.
configModeType_2(object): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe.value([‘string’, ‘number’], required): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe.
configCmdSeqs_0(object): [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
configCmdSeqs_1(object): [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
configCmdSeqs_2(object): [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
reserved1(object): [0x02c-0x02f] Reserved for future use.value([‘string’, ‘number’], required): [0x02c-0x02f] Reserved for future use.
configCmdArgs_0(object): [0x030-0x03b] Arguments/Parameters for device Configuration commands.value([‘string’, ‘number’], required): [0x030-0x03b] Arguments/Parameters for device Configuration commands.
configCmdArgs_1(object): [0x030-0x03b] Arguments/Parameters for device Configuration commands.value([‘string’, ‘number’], required): [0x030-0x03b] Arguments/Parameters for device Configuration commands.
configCmdArgs_2(object): [0x030-0x03b] Arguments/Parameters for device Configuration commands.value([‘string’, ‘number’], required): [0x030-0x03b] Arguments/Parameters for device Configuration commands.
reserved2(object): [0x03c-0x03f] Reserved for future use.value([‘string’, ‘number’], required): [0x03c-0x03f] Reserved for future use.
controllerMiscOption(object): [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more details.value([‘string’, ‘number’], required): [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more details.
deviceType(object): [0x044-0x044] Device Type: See Flash Type Definition for more details.value([‘string’, ‘number’], required): [0x044-0x044] Device Type: See Flash Type Definition for more details.
sflashPadType(object): [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal.value([‘string’, ‘number’], required): [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal.
serialClkFreq(object): [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot Chapter for more details.value([‘string’, ‘number’], required): [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot Chapter for more details.
lutCustomSeqEnable(object): [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot be done using 1 LUT sequence, currently, only applicable to HyperFLASH.value([‘string’, ‘number’], required): [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot be done using 1 LUT sequence, currently, only applicable to HyperFLASH.
reserved3_0(object): [0x048-0x04f] Reserved for future use.value([‘string’, ‘number’], required): [0x048-0x04f] Reserved for future use.
reserved3_1(object): [0x048-0x04f] Reserved for future use.value([‘string’, ‘number’], required): [0x048-0x04f] Reserved for future use.
sflashA1Size(object): [0x050-0x053] Size of Flash connected to A1.value([‘string’, ‘number’], required): [0x050-0x053] Size of Flash connected to A1.
sflashA2Size(object): [0x054-0x057] Size of Flash connected to A2.value([‘string’, ‘number’], required): [0x054-0x057] Size of Flash connected to A2.
sflashB1Size(object): [0x058-0x05b] Size of Flash connected to B1.value([‘string’, ‘number’], required): [0x058-0x05b] Size of Flash connected to B1.
sflashB2Size(object): [0x05c-0x05f] Size of Flash connected to B2.value([‘string’, ‘number’], required): [0x05c-0x05f] Size of Flash connected to B2.
csPadSettingOverride(object): [0x060-0x063] CS pad setting override value.value([‘string’, ‘number’], required): [0x060-0x063] CS pad setting override value.
sclkPadSettingOverride(object): [0x064-0x067] SCK pad setting override value.value([‘string’, ‘number’], required): [0x064-0x067] SCK pad setting override value.
dataPadSettingOverride(object): [0x068-0x06b] data pad setting override value.value([‘string’, ‘number’], required): [0x068-0x06b] data pad setting override value.
dqsPadSettingOverride(object): [0x06c-0x06f] DQS pad setting override value.value([‘string’, ‘number’], required): [0x06c-0x06f] DQS pad setting override value.
timeoutInMs(object): [0x070-0x073] Timeout threshold for read status command.value([‘string’, ‘number’], required): [0x070-0x073] Timeout threshold for read status command.
commandInterval(object): [0x074-0x077] CS deselect interval between two commands.value([‘string’, ‘number’], required): [0x074-0x077] CS deselect interval between two commands.
dataValidTime_0(object): [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns.value([‘string’, ‘number’], required): [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns.
dataValidTime_1(object): [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns.value([‘string’, ‘number’], required): [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns.
busyOffset(object): [0x07c-0x07d] Busy offset, valid value: 0-31.value([‘string’, ‘number’], required): [0x07c-0x07d] Busy offset, valid value: 0-31.
busyBitPolarity(object): [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - busy flag is 0 when flash device is busy.value([‘string’, ‘number’], required): [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - busy flag is 0 when flash device is busy.
lookupTable_0(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_1(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_2(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_3(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_4(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_5(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_6(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_7(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_8(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_9(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_10(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_11(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_12(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_13(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_14(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_15(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_16(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_17(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_18(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_19(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_20(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_21(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_22(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_23(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_24(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_25(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_26(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_27(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_28(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_29(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_30(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_31(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_32(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_33(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_34(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_35(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_36(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_37(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_38(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_39(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_40(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_41(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_42(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_43(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_44(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_45(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_46(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_47(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_48(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_49(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_50(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_51(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_52(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_53(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_54(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_55(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_56(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_57(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_58(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_59(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_60(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_61(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_62(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_63(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lutCustomSeq_0(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_1(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_2(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_3(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_4(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_5(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_6(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_7(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_8(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_9(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_10(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_11(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
reserved4_0(object): [0x1b0-0x1bf] Reserved for future use.value([‘string’, ‘number’], required): [0x1b0-0x1bf] Reserved for future use.
reserved4_1(object): [0x1b0-0x1bf] Reserved for future use.value([‘string’, ‘number’], required): [0x1b0-0x1bf] Reserved for future use.
reserved4_2(object): [0x1b0-0x1bf] Reserved for future use.value([‘string’, ‘number’], required): [0x1b0-0x1bf] Reserved for future use.
reserved4_3(object): [0x1b0-0x1bf] Reserved for future use.value([‘string’, ‘number’], required): [0x1b0-0x1bf] Reserved for future use.
pageSize(object): Page size of Serial NOR.value([‘string’, ‘number’], required): Page size of Serial NOR.
sectorSize(object): Sector size of Serial NOR.value([‘string’, ‘number’], required): Sector size of Serial NOR.
ipcmdSerialClkFreq(object): Clock frequency for IP command.value([‘string’, ‘number’], required): Clock frequency for IP command.
isUniformBlockSize(object): Sector/Block size is the same.value([‘string’, ‘number’], required): Sector/Block size is the same.
reserved0_0(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserved0_1(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
serialNorType(object): Serial NOR Flash type: 0/1/2/3.value([‘string’, ‘number’], required): Serial NOR Flash type: 0/1/2/3.
needExitNoCmdMode(object): Need to exit NoCmd mode before other IP command.value([‘string’, ‘number’], required): Need to exit NoCmd mode before other IP command.
halfClkForNonReadCmd(object): Half the Serial Clock for non-read command: true/false.value([‘string’, ‘number’], required): Half the Serial Clock for non-read command: true/false.
needRestoreNoCmdMode(object): Need to Restore NoCmd mode after IP commmand execution.value([‘string’, ‘number’], required): Need to Restore NoCmd mode after IP commmand execution.
blockSize(object): Block size.value([‘string’, ‘number’], required): Block size.
reserve2_0(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_1(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_2(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_3(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_4(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_5(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_6(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_7(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_8(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_9(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_10(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
# =========== FCB template for rt116x and flexspi_nor ===========
# ----------------------------------------------------------------------------------------------------
# == FCB template for rt116x and flexspi_nor ==
# ----------------------------------------------------------------------------------------------------
family: CHOOSE_FROM_TABLE # [Required], MCU family name; Possible options:['lpc55s3x', 'rt101x', 'rt102x', 'rt104x', 'rt105x', 'rt106x', 'rt116x', 'rt117x', 'rt118x', 'rt5xx', 'rt6xx', 'rw61x']
revision: a1 # [Optional], Chip silicon revision; If needed this could be used to specify silicon revision of device; Possible options:['latest']
type: flexspi_nor # [Required], Memory type; Specify type of memory used by FCB description; Possible options:['flexspi_nor']
fcb_settings: # [Required], rt116x
tag: # [Optional], tag; [0x000-0x003] Tag, fixed value 0x42464346UL
value: '0x00000000' # [Required], tag; [0x000-0x003] Tag, fixed value 0x42464346UL
version: # [Optional], version; [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix
value: '0x00000000' # [Required], version; [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix
reserved0: # [Optional], reserved0; [0x008-0x00b] Reserved for future use
value: '0x00000000' # [Required], reserved0; [0x008-0x00b] Reserved for future use
readSampleClkSrc: # [Optional], readSampleClkSrc; [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3
value: '0x00' # [Required], readSampleClkSrc; [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3
csHoldTime: # [Optional], csHoldTime; [0x00d-0x00d] CS hold time, default value: 3
value: '0x00' # [Required], csHoldTime; [0x00d-0x00d] CS hold time, default value: 3
csSetupTime: # [Optional], csSetupTime; [0x00e-0x00e] CS setup time, default value: 3
value: '0x00' # [Required], csSetupTime; [0x00e-0x00e] CS setup time, default value: 3
columnAddressWidth: # [Optional], columnAddressWidth; [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For Serial NAND, need to refer to datasheet
value: '0x00' # [Required], columnAddressWidth; [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For Serial NAND, need to refer to datasheet
deviceModeCfgEnable: # [Optional], deviceModeCfgEnable; [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable
value: '0x00' # [Required], deviceModeCfgEnable; [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable
deviceModeType: # [Optional], deviceModeType; [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, Generic configuration, etc.
value: '0x00' # [Required], deviceModeType; [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, Generic configuration, etc.
waitTimeCfgCommands: # [Optional], waitTimeCfgCommands; [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for DPI/QPI/OPI switch or reset command
value: '0x0000' # [Required], waitTimeCfgCommands; [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for DPI/QPI/OPI switch or reset command
deviceModeSeq: # [Optional], deviceModeSeq; [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt sequence number, [31:16] Reserved
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
deviceModeArg: # [Optional], deviceModeArg; [0x018-0x01b] Argument/Parameter for device configuration
value: '0x00000000' # [Required], deviceModeArg; [0x018-0x01b] Argument/Parameter for device configuration
configCmdEnable: # [Optional], configCmdEnable; [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable
value: '0x00' # [Required], configCmdEnable; [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable
configModeType_0: # [Optional], configModeType_0; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
value: '0x00' # [Required], configModeType_0; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
configModeType_1: # [Optional], configModeType_1; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
value: '0x00' # [Required], configModeType_1; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
configModeType_2: # [Optional], configModeType_2; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
value: '0x00' # [Required], configModeType_2; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
configCmdSeqs_0: # [Optional], configCmdSeqs_0; [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
configCmdSeqs_1: # [Optional], configCmdSeqs_1; [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
configCmdSeqs_2: # [Optional], configCmdSeqs_2; [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
reserved1: # [Optional], reserved1; [0x02c-0x02f] Reserved for future use
value: '0x00000000' # [Required], reserved1; [0x02c-0x02f] Reserved for future use
configCmdArgs_0: # [Optional], configCmdArgs_0; [0x030-0x03b] Arguments/Parameters for device Configuration commands
value: '0x00000000' # [Required], configCmdArgs_0; [0x030-0x03b] Arguments/Parameters for device Configuration commands
configCmdArgs_1: # [Optional], configCmdArgs_1; [0x030-0x03b] Arguments/Parameters for device Configuration commands
value: '0x00000000' # [Required], configCmdArgs_1; [0x030-0x03b] Arguments/Parameters for device Configuration commands
configCmdArgs_2: # [Optional], configCmdArgs_2; [0x030-0x03b] Arguments/Parameters for device Configuration commands
value: '0x00000000' # [Required], configCmdArgs_2; [0x030-0x03b] Arguments/Parameters for device Configuration commands
reserved2: # [Optional], reserved2; [0x03c-0x03f] Reserved for future use
value: '0x00000000' # [Required], reserved2; [0x03c-0x03f] Reserved for future use
controllerMiscOption: # [Optional], controllerMiscOption; [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more details
value: '0x00000000' # [Required], controllerMiscOption; [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more details
deviceType: # [Optional], deviceType; [0x044-0x044] Device Type: See Flash Type Definition for more details
value: '0x00' # [Required], deviceType; [0x044-0x044] Device Type: See Flash Type Definition for more details
sflashPadType: # [Optional], sflashPadType; [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
value: '0x00' # [Required], sflashPadType; [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
serialClkFreq: # [Optional], serialClkFreq; [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot Chapter for more details
value: '0x00' # [Required], serialClkFreq; [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot Chapter for more details
lutCustomSeqEnable: # [Optional], lutCustomSeqEnable; [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot be done using 1 LUT sequence, currently, only applicable to HyperFLASH
value: '0x00' # [Required], lutCustomSeqEnable; [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot be done using 1 LUT sequence, currently, only applicable to HyperFLASH
reserved3_0: # [Optional], reserved3_0; [0x048-0x04f] Reserved for future use
value: '0x00000000' # [Required], reserved3_0; [0x048-0x04f] Reserved for future use
reserved3_1: # [Optional], reserved3_1; [0x048-0x04f] Reserved for future use
value: '0x00000000' # [Required], reserved3_1; [0x048-0x04f] Reserved for future use
sflashA1Size: # [Optional], sflashA1Size; [0x050-0x053] Size of Flash connected to A1
value: '0x00000000' # [Required], sflashA1Size; [0x050-0x053] Size of Flash connected to A1
sflashA2Size: # [Optional], sflashA2Size; [0x054-0x057] Size of Flash connected to A2
value: '0x00000000' # [Required], sflashA2Size; [0x054-0x057] Size of Flash connected to A2
sflashB1Size: # [Optional], sflashB1Size; [0x058-0x05b] Size of Flash connected to B1
value: '0x00000000' # [Required], sflashB1Size; [0x058-0x05b] Size of Flash connected to B1
sflashB2Size: # [Optional], sflashB2Size; [0x05c-0x05f] Size of Flash connected to B2
value: '0x00000000' # [Required], sflashB2Size; [0x05c-0x05f] Size of Flash connected to B2
csPadSettingOverride: # [Optional], csPadSettingOverride; [0x060-0x063] CS pad setting override value
value: '0x00000000' # [Required], csPadSettingOverride; [0x060-0x063] CS pad setting override value
sclkPadSettingOverride: # [Optional], sclkPadSettingOverride; [0x064-0x067] SCK pad setting override value
value: '0x00000000' # [Required], sclkPadSettingOverride; [0x064-0x067] SCK pad setting override value
dataPadSettingOverride: # [Optional], dataPadSettingOverride; [0x068-0x06b] data pad setting override value
value: '0x00000000' # [Required], dataPadSettingOverride; [0x068-0x06b] data pad setting override value
dqsPadSettingOverride: # [Optional], dqsPadSettingOverride; [0x06c-0x06f] DQS pad setting override value
value: '0x00000000' # [Required], dqsPadSettingOverride; [0x06c-0x06f] DQS pad setting override value
timeoutInMs: # [Optional], timeoutInMs; [0x070-0x073] Timeout threshold for read status command
value: '0x00000000' # [Required], timeoutInMs; [0x070-0x073] Timeout threshold for read status command
commandInterval: # [Optional], commandInterval; [0x074-0x077] CS deselect interval between two commands
value: '0x00000000' # [Required], commandInterval; [0x074-0x077] CS deselect interval between two commands
dataValidTime_0: # [Optional], dataValidTime_0; [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
value: '0x0000' # [Required], dataValidTime_0; [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
dataValidTime_1: # [Optional], dataValidTime_1; [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
value: '0x0000' # [Required], dataValidTime_1; [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
busyOffset: # [Optional], busyOffset; [0x07c-0x07d] Busy offset, valid value: 0-31
value: '0x0000' # [Required], busyOffset; [0x07c-0x07d] Busy offset, valid value: 0-31
busyBitPolarity: # [Optional], busyBitPolarity; [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - busy flag is 0 when flash device is busy
value: '0x0000' # [Required], busyBitPolarity; [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - busy flag is 0 when flash device is busy
lookupTable_0: # [Optional], lookupTable_0; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_0; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_1: # [Optional], lookupTable_1; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_1; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_2: # [Optional], lookupTable_2; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_2; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_3: # [Optional], lookupTable_3; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_3; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_4: # [Optional], lookupTable_4; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_4; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_5: # [Optional], lookupTable_5; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_5; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_6: # [Optional], lookupTable_6; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_6; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_7: # [Optional], lookupTable_7; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_7; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_8: # [Optional], lookupTable_8; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_8; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_9: # [Optional], lookupTable_9; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_9; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_10: # [Optional], lookupTable_10; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_10; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_11: # [Optional], lookupTable_11; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_11; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_12: # [Optional], lookupTable_12; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_12; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_13: # [Optional], lookupTable_13; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_13; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_14: # [Optional], lookupTable_14; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_14; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_15: # [Optional], lookupTable_15; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_15; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_16: # [Optional], lookupTable_16; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_16; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_17: # [Optional], lookupTable_17; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_17; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_18: # [Optional], lookupTable_18; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_18; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_19: # [Optional], lookupTable_19; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_19; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_20: # [Optional], lookupTable_20; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_20; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_21: # [Optional], lookupTable_21; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_21; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_22: # [Optional], lookupTable_22; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_22; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_23: # [Optional], lookupTable_23; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_23; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_24: # [Optional], lookupTable_24; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_24; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_25: # [Optional], lookupTable_25; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_25; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_26: # [Optional], lookupTable_26; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_26; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_27: # [Optional], lookupTable_27; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_27; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_28: # [Optional], lookupTable_28; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_28; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_29: # [Optional], lookupTable_29; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_29; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_30: # [Optional], lookupTable_30; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_30; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_31: # [Optional], lookupTable_31; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_31; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_32: # [Optional], lookupTable_32; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_32; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_33: # [Optional], lookupTable_33; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_33; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_34: # [Optional], lookupTable_34; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_34; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_35: # [Optional], lookupTable_35; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_35; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_36: # [Optional], lookupTable_36; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_36; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_37: # [Optional], lookupTable_37; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_37; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_38: # [Optional], lookupTable_38; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_38; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_39: # [Optional], lookupTable_39; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_39; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_40: # [Optional], lookupTable_40; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_40; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_41: # [Optional], lookupTable_41; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_41; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_42: # [Optional], lookupTable_42; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_42; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_43: # [Optional], lookupTable_43; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_43; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_44: # [Optional], lookupTable_44; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_44; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_45: # [Optional], lookupTable_45; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_45; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_46: # [Optional], lookupTable_46; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_46; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_47: # [Optional], lookupTable_47; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_47; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_48: # [Optional], lookupTable_48; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_48; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_49: # [Optional], lookupTable_49; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_49; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_50: # [Optional], lookupTable_50; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_50; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_51: # [Optional], lookupTable_51; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_51; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_52: # [Optional], lookupTable_52; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_52; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_53: # [Optional], lookupTable_53; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_53; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_54: # [Optional], lookupTable_54; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_54; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_55: # [Optional], lookupTable_55; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_55; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_56: # [Optional], lookupTable_56; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_56; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_57: # [Optional], lookupTable_57; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_57; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_58: # [Optional], lookupTable_58; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_58; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_59: # [Optional], lookupTable_59; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_59; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_60: # [Optional], lookupTable_60; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_60; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_61: # [Optional], lookupTable_61; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_61; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_62: # [Optional], lookupTable_62; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_62; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_63: # [Optional], lookupTable_63; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_63; [0x080-0x17f] Lookup table holds Flash command sequences
lutCustomSeq_0: # [Optional], lutCustomSeq_0; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_1: # [Optional], lutCustomSeq_1; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_2: # [Optional], lutCustomSeq_2; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_3: # [Optional], lutCustomSeq_3; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_4: # [Optional], lutCustomSeq_4; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_5: # [Optional], lutCustomSeq_5; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_6: # [Optional], lutCustomSeq_6; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_7: # [Optional], lutCustomSeq_7; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_8: # [Optional], lutCustomSeq_8; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_9: # [Optional], lutCustomSeq_9; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_10: # [Optional], lutCustomSeq_10; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_11: # [Optional], lutCustomSeq_11; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
reserved4_0: # [Optional], reserved4_0; [0x1b0-0x1bf] Reserved for future use
value: '0x00000000' # [Required], reserved4_0; [0x1b0-0x1bf] Reserved for future use
reserved4_1: # [Optional], reserved4_1; [0x1b0-0x1bf] Reserved for future use
value: '0x00000000' # [Required], reserved4_1; [0x1b0-0x1bf] Reserved for future use
reserved4_2: # [Optional], reserved4_2; [0x1b0-0x1bf] Reserved for future use
value: '0x00000000' # [Required], reserved4_2; [0x1b0-0x1bf] Reserved for future use
reserved4_3: # [Optional], reserved4_3; [0x1b0-0x1bf] Reserved for future use
value: '0x00000000' # [Required], reserved4_3; [0x1b0-0x1bf] Reserved for future use
pageSize: # [Optional], pageSize; Page size of Serial NOR
value: '0x00000000' # [Required], pageSize; Page size of Serial NOR
sectorSize: # [Optional], sectorSize; Sector size of Serial NOR
value: '0x00000000' # [Required], sectorSize; Sector size of Serial NOR
ipcmdSerialClkFreq: # [Optional], ipcmdSerialClkFreq; Clock frequency for IP command
value: '0x00' # [Required], ipcmdSerialClkFreq; Clock frequency for IP command
isUniformBlockSize: # [Optional], isUniformBlockSize; Sector/Block size is the same
value: '0x00' # [Required], isUniformBlockSize; Sector/Block size is the same
reserved0_0: # [Optional], reserved0_0; Reserved for future use
value: '0x00' # [Required], reserved0_0; Reserved for future use
reserved0_1: # [Optional], reserved0_1; Reserved for future use
value: '0x00' # [Required], reserved0_1; Reserved for future use
serialNorType: # [Optional], serialNorType; Serial NOR Flash type: 0/1/2/3
value: '0x00' # [Required], serialNorType; Serial NOR Flash type: 0/1/2/3
needExitNoCmdMode: # [Optional], needExitNoCmdMode; Need to exit NoCmd mode before other IP command
value: '0x00' # [Required], needExitNoCmdMode; Need to exit NoCmd mode before other IP command
halfClkForNonReadCmd: # [Optional], halfClkForNonReadCmd; Half the Serial Clock for non-read command: true/false
value: '0x00' # [Required], halfClkForNonReadCmd; Half the Serial Clock for non-read command: true/false
needRestoreNoCmdMode: # [Optional], needRestoreNoCmdMode; Need to Restore NoCmd mode after IP commmand execution
value: '0x00' # [Required], needRestoreNoCmdMode; Need to Restore NoCmd mode after IP commmand execution
blockSize: # [Optional], blockSize; Block size
value: '0x00000000' # [Required], blockSize; Block size
reserve2_0: # [Optional], reserve2_0; Reserved for future use
value: '0x00000000' # [Required], reserve2_0; Reserved for future use
reserve2_1: # [Optional], reserve2_1; Reserved for future use
value: '0x00000000' # [Required], reserve2_1; Reserved for future use
reserve2_2: # [Optional], reserve2_2; Reserved for future use
value: '0x00000000' # [Required], reserve2_2; Reserved for future use
reserve2_3: # [Optional], reserve2_3; Reserved for future use
value: '0x00000000' # [Required], reserve2_3; Reserved for future use
reserve2_4: # [Optional], reserve2_4; Reserved for future use
value: '0x00000000' # [Required], reserve2_4; Reserved for future use
reserve2_5: # [Optional], reserve2_5; Reserved for future use
value: '0x00000000' # [Required], reserve2_5; Reserved for future use
reserve2_6: # [Optional], reserve2_6; Reserved for future use
value: '0x00000000' # [Required], reserve2_6; Reserved for future use
reserve2_7: # [Optional], reserve2_7; Reserved for future use
value: '0x00000000' # [Required], reserve2_7; Reserved for future use
reserve2_8: # [Optional], reserve2_8; Reserved for future use
value: '0x00000000' # [Required], reserve2_8; Reserved for future use
reserve2_9: # [Optional], reserve2_9; Reserved for future use
value: '0x00000000' # [Required], reserve2_9; Reserved for future use
reserve2_10: # [Optional], reserve2_10; Reserved for future use
value: '0x00000000' # [Required], reserve2_10; Reserved for future use
FCB template for rt117x and flexspi_nor
family(string): MCU family name. Must be one of:["lpc55s3x", "rt101x", "rt102x", "rt104x", "rt105x", "rt106x", "rt116x", "rt117x", "rt118x", "rt5xx", "rt6xx", "rw61x"].revision(string): If needed this could be used to specify silicon revision of device. Must be one of:["latest"].type(string): Specify type of memory used by FCB description. Must be one of:["flexspi_nor"].fcb_settings(object)tag(object): [0x000-0x003] Tag, fixed value 0x42464346UL.value([‘string’, ‘number’], required): [0x000-0x003] Tag, fixed value 0x42464346UL.
version(object): [0x004-0x007] Version,[31:24] -‘V’, [23:16] - Major, [15:8] - Minor, [7:0] - bugfix.value([‘string’, ‘number’], required): [0x004-0x007] Version,[31:24] -‘V’, [23:16] - Major, [15:8] - Minor, [7:0] - bugfix.
reserved0(object): [0x008-0x00b] Reserved for future use.value([‘string’, ‘number’], required): [0x008-0x00b] Reserved for future use.
readSampleClkSrc(object): [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3.value([‘string’, ‘number’], required): [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3.
csHoldTime(object): [0x00d-0x00d] CS hold time, default value: 3.value([‘string’, ‘number’], required): [0x00d-0x00d] CS hold time, default value: 3.
csSetupTime(object): [0x00e-0x00e] CS setup time, default value: 3.value([‘string’, ‘number’], required): [0x00e-0x00e] CS setup time, default value: 3.
columnAddressWidth(object): [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For Serial NAND, need to refer to datasheet.value([‘string’, ‘number’], required): [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For Serial NAND, need to refer to datasheet.
deviceModeCfgEnable(object): [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable.value([‘string’, ‘number’], required): [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable.
deviceModeType(object): [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, Generic configuration, etc.value([‘string’, ‘number’], required): [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, Generic configuration, etc.
waitTimeCfgCommands(object): [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for DPI/QPI/OPI switch or reset command.value([‘string’, ‘number’], required): [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for DPI/QPI/OPI switch or reset command.
deviceModeSeq(object): [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt sequence number, [31:16] Reserved.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
deviceModeArg(object): [0x018-0x01b] Argument/Parameter for device configuration.value([‘string’, ‘number’], required): [0x018-0x01b] Argument/Parameter for device configuration.
configCmdEnable(object): [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable.value([‘string’, ‘number’], required): [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable.
configModeType_0(object): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe.value([‘string’, ‘number’], required): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe.
configModeType_1(object): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe.value([‘string’, ‘number’], required): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe.
configModeType_2(object): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe.value([‘string’, ‘number’], required): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe.
configCmdSeqs_0(object): [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
configCmdSeqs_1(object): [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
configCmdSeqs_2(object): [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
reserved1(object): [0x02c-0x02f] Reserved for future use.value([‘string’, ‘number’], required): [0x02c-0x02f] Reserved for future use.
configCmdArgs_0(object): [0x030-0x03b] Arguments/Parameters for device Configuration commands.value([‘string’, ‘number’], required): [0x030-0x03b] Arguments/Parameters for device Configuration commands.
configCmdArgs_1(object): [0x030-0x03b] Arguments/Parameters for device Configuration commands.value([‘string’, ‘number’], required): [0x030-0x03b] Arguments/Parameters for device Configuration commands.
configCmdArgs_2(object): [0x030-0x03b] Arguments/Parameters for device Configuration commands.value([‘string’, ‘number’], required): [0x030-0x03b] Arguments/Parameters for device Configuration commands.
reserved2(object): [0x03c-0x03f] Reserved for future use.value([‘string’, ‘number’], required): [0x03c-0x03f] Reserved for future use.
controllerMiscOption(object): [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more details.value([‘string’, ‘number’], required): [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more details.
deviceType(object): [0x044-0x044] Device Type: See Flash Type Definition for more details.value([‘string’, ‘number’], required): [0x044-0x044] Device Type: See Flash Type Definition for more details.
sflashPadType(object): [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal.value([‘string’, ‘number’], required): [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal.
serialClkFreq(object): [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot Chapter for more details.value([‘string’, ‘number’], required): [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot Chapter for more details.
lutCustomSeqEnable(object): [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot be done using 1 LUT sequence, currently, only applicable to HyperFLASH.value([‘string’, ‘number’], required): [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot be done using 1 LUT sequence, currently, only applicable to HyperFLASH.
reserved3_0(object): [0x048-0x04f] Reserved for future use.value([‘string’, ‘number’], required): [0x048-0x04f] Reserved for future use.
reserved3_1(object): [0x048-0x04f] Reserved for future use.value([‘string’, ‘number’], required): [0x048-0x04f] Reserved for future use.
sflashA1Size(object): [0x050-0x053] Size of Flash connected to A1.value([‘string’, ‘number’], required): [0x050-0x053] Size of Flash connected to A1.
sflashA2Size(object): [0x054-0x057] Size of Flash connected to A2.value([‘string’, ‘number’], required): [0x054-0x057] Size of Flash connected to A2.
sflashB1Size(object): [0x058-0x05b] Size of Flash connected to B1.value([‘string’, ‘number’], required): [0x058-0x05b] Size of Flash connected to B1.
sflashB2Size(object): [0x05c-0x05f] Size of Flash connected to B2.value([‘string’, ‘number’], required): [0x05c-0x05f] Size of Flash connected to B2.
csPadSettingOverride(object): [0x060-0x063] CS pad setting override value.value([‘string’, ‘number’], required): [0x060-0x063] CS pad setting override value.
sclkPadSettingOverride(object): [0x064-0x067] SCK pad setting override value.value([‘string’, ‘number’], required): [0x064-0x067] SCK pad setting override value.
dataPadSettingOverride(object): [0x068-0x06b] data pad setting override value.value([‘string’, ‘number’], required): [0x068-0x06b] data pad setting override value.
dqsPadSettingOverride(object): [0x06c-0x06f] DQS pad setting override value.value([‘string’, ‘number’], required): [0x06c-0x06f] DQS pad setting override value.
timeoutInMs(object): [0x070-0x073] Timeout threshold for read status command.value([‘string’, ‘number’], required): [0x070-0x073] Timeout threshold for read status command.
commandInterval(object): [0x074-0x077] CS deselect interval between two commands.value([‘string’, ‘number’], required): [0x074-0x077] CS deselect interval between two commands.
dataValidTime_0(object): [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns.value([‘string’, ‘number’], required): [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns.
dataValidTime_1(object): [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns.value([‘string’, ‘number’], required): [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns.
busyOffset(object): [0x07c-0x07d] Busy offset, valid value: 0-31.value([‘string’, ‘number’], required): [0x07c-0x07d] Busy offset, valid value: 0-31.
busyBitPolarity(object): [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - busy flag is 0 when flash device is busy.value([‘string’, ‘number’], required): [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - busy flag is 0 when flash device is busy.
lookupTable_0(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_1(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_2(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_3(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_4(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_5(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_6(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_7(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_8(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_9(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_10(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_11(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_12(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_13(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_14(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_15(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_16(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_17(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_18(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_19(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_20(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_21(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_22(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_23(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_24(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_25(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_26(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_27(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_28(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_29(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_30(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_31(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_32(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_33(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_34(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_35(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_36(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_37(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_38(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_39(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_40(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_41(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_42(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_43(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_44(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_45(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_46(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_47(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_48(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_49(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_50(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_51(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_52(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_53(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_54(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_55(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_56(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_57(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_58(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_59(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_60(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_61(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_62(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_63(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lutCustomSeq_0(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_1(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_2(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_3(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_4(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_5(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_6(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_7(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_8(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_9(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_10(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_11(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
reserved4_0(object): [0x1b0-0x1bf] Reserved for future use.value([‘string’, ‘number’], required): [0x1b0-0x1bf] Reserved for future use.
reserved4_1(object): [0x1b0-0x1bf] Reserved for future use.value([‘string’, ‘number’], required): [0x1b0-0x1bf] Reserved for future use.
reserved4_2(object): [0x1b0-0x1bf] Reserved for future use.value([‘string’, ‘number’], required): [0x1b0-0x1bf] Reserved for future use.
reserved4_3(object): [0x1b0-0x1bf] Reserved for future use.value([‘string’, ‘number’], required): [0x1b0-0x1bf] Reserved for future use.
pageSize(object): Page size of Serial NOR.value([‘string’, ‘number’], required): Page size of Serial NOR.
sectorSize(object): Sector size of Serial NOR.value([‘string’, ‘number’], required): Sector size of Serial NOR.
ipcmdSerialClkFreq(object): Clock frequency for IP command.value([‘string’, ‘number’], required): Clock frequency for IP command.
isUniformBlockSize(object): Sector/Block size is the same.value([‘string’, ‘number’], required): Sector/Block size is the same.
reserved0_0(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserved0_1(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
serialNorType(object): Serial NOR Flash type: 0/1/2/3.value([‘string’, ‘number’], required): Serial NOR Flash type: 0/1/2/3.
needExitNoCmdMode(object): Need to exit NoCmd mode before other IP command.value([‘string’, ‘number’], required): Need to exit NoCmd mode before other IP command.
halfClkForNonReadCmd(object): Half the Serial Clock for non-read command: true/false.value([‘string’, ‘number’], required): Half the Serial Clock for non-read command: true/false.
needRestoreNoCmdMode(object): Need to Restore NoCmd mode after IP commmand execution.value([‘string’, ‘number’], required): Need to Restore NoCmd mode after IP commmand execution.
blockSize(object): Block size.value([‘string’, ‘number’], required): Block size.
reserve2_0(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_1(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_2(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_3(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_4(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_5(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_6(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_7(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_8(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_9(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserve2_10(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
# =========== FCB template for rt117x and flexspi_nor ===========
# ----------------------------------------------------------------------------------------------------
# == FCB template for rt117x and flexspi_nor ==
# ----------------------------------------------------------------------------------------------------
family: CHOOSE_FROM_TABLE # [Required], MCU family name; Possible options:['lpc55s3x', 'rt101x', 'rt102x', 'rt104x', 'rt105x', 'rt106x', 'rt116x', 'rt117x', 'rt118x', 'rt5xx', 'rt6xx', 'rw61x']
revision: a1 # [Optional], Chip silicon revision; If needed this could be used to specify silicon revision of device; Possible options:['latest']
type: flexspi_nor # [Required], Memory type; Specify type of memory used by FCB description; Possible options:['flexspi_nor']
fcb_settings: # [Required], rt117x
tag: # [Optional], tag; [0x000-0x003] Tag, fixed value 0x42464346UL
value: '0x00000000' # [Required], tag; [0x000-0x003] Tag, fixed value 0x42464346UL
version: # [Optional], version; [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix
value: '0x00000000' # [Required], version; [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix
reserved0: # [Optional], reserved0; [0x008-0x00b] Reserved for future use
value: '0x00000000' # [Required], reserved0; [0x008-0x00b] Reserved for future use
readSampleClkSrc: # [Optional], readSampleClkSrc; [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3
value: '0x00' # [Required], readSampleClkSrc; [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3
csHoldTime: # [Optional], csHoldTime; [0x00d-0x00d] CS hold time, default value: 3
value: '0x00' # [Required], csHoldTime; [0x00d-0x00d] CS hold time, default value: 3
csSetupTime: # [Optional], csSetupTime; [0x00e-0x00e] CS setup time, default value: 3
value: '0x00' # [Required], csSetupTime; [0x00e-0x00e] CS setup time, default value: 3
columnAddressWidth: # [Optional], columnAddressWidth; [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For Serial NAND, need to refer to datasheet
value: '0x00' # [Required], columnAddressWidth; [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For Serial NAND, need to refer to datasheet
deviceModeCfgEnable: # [Optional], deviceModeCfgEnable; [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable
value: '0x00' # [Required], deviceModeCfgEnable; [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable
deviceModeType: # [Optional], deviceModeType; [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, Generic configuration, etc.
value: '0x00' # [Required], deviceModeType; [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, Generic configuration, etc.
waitTimeCfgCommands: # [Optional], waitTimeCfgCommands; [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for DPI/QPI/OPI switch or reset command
value: '0x0000' # [Required], waitTimeCfgCommands; [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for DPI/QPI/OPI switch or reset command
deviceModeSeq: # [Optional], deviceModeSeq; [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt sequence number, [31:16] Reserved
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
deviceModeArg: # [Optional], deviceModeArg; [0x018-0x01b] Argument/Parameter for device configuration
value: '0x00000000' # [Required], deviceModeArg; [0x018-0x01b] Argument/Parameter for device configuration
configCmdEnable: # [Optional], configCmdEnable; [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable
value: '0x00' # [Required], configCmdEnable; [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable
configModeType_0: # [Optional], configModeType_0; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
value: '0x00' # [Required], configModeType_0; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
configModeType_1: # [Optional], configModeType_1; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
value: '0x00' # [Required], configModeType_1; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
configModeType_2: # [Optional], configModeType_2; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
value: '0x00' # [Required], configModeType_2; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
configCmdSeqs_0: # [Optional], configCmdSeqs_0; [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
configCmdSeqs_1: # [Optional], configCmdSeqs_1; [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
configCmdSeqs_2: # [Optional], configCmdSeqs_2; [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
reserved1: # [Optional], reserved1; [0x02c-0x02f] Reserved for future use
value: '0x00000000' # [Required], reserved1; [0x02c-0x02f] Reserved for future use
configCmdArgs_0: # [Optional], configCmdArgs_0; [0x030-0x03b] Arguments/Parameters for device Configuration commands
value: '0x00000000' # [Required], configCmdArgs_0; [0x030-0x03b] Arguments/Parameters for device Configuration commands
configCmdArgs_1: # [Optional], configCmdArgs_1; [0x030-0x03b] Arguments/Parameters for device Configuration commands
value: '0x00000000' # [Required], configCmdArgs_1; [0x030-0x03b] Arguments/Parameters for device Configuration commands
configCmdArgs_2: # [Optional], configCmdArgs_2; [0x030-0x03b] Arguments/Parameters for device Configuration commands
value: '0x00000000' # [Required], configCmdArgs_2; [0x030-0x03b] Arguments/Parameters for device Configuration commands
reserved2: # [Optional], reserved2; [0x03c-0x03f] Reserved for future use
value: '0x00000000' # [Required], reserved2; [0x03c-0x03f] Reserved for future use
controllerMiscOption: # [Optional], controllerMiscOption; [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more details
value: '0x00000000' # [Required], controllerMiscOption; [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more details
deviceType: # [Optional], deviceType; [0x044-0x044] Device Type: See Flash Type Definition for more details
value: '0x00' # [Required], deviceType; [0x044-0x044] Device Type: See Flash Type Definition for more details
sflashPadType: # [Optional], sflashPadType; [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
value: '0x00' # [Required], sflashPadType; [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
serialClkFreq: # [Optional], serialClkFreq; [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot Chapter for more details
value: '0x00' # [Required], serialClkFreq; [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot Chapter for more details
lutCustomSeqEnable: # [Optional], lutCustomSeqEnable; [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot be done using 1 LUT sequence, currently, only applicable to HyperFLASH
value: '0x00' # [Required], lutCustomSeqEnable; [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot be done using 1 LUT sequence, currently, only applicable to HyperFLASH
reserved3_0: # [Optional], reserved3_0; [0x048-0x04f] Reserved for future use
value: '0x00000000' # [Required], reserved3_0; [0x048-0x04f] Reserved for future use
reserved3_1: # [Optional], reserved3_1; [0x048-0x04f] Reserved for future use
value: '0x00000000' # [Required], reserved3_1; [0x048-0x04f] Reserved for future use
sflashA1Size: # [Optional], sflashA1Size; [0x050-0x053] Size of Flash connected to A1
value: '0x00000000' # [Required], sflashA1Size; [0x050-0x053] Size of Flash connected to A1
sflashA2Size: # [Optional], sflashA2Size; [0x054-0x057] Size of Flash connected to A2
value: '0x00000000' # [Required], sflashA2Size; [0x054-0x057] Size of Flash connected to A2
sflashB1Size: # [Optional], sflashB1Size; [0x058-0x05b] Size of Flash connected to B1
value: '0x00000000' # [Required], sflashB1Size; [0x058-0x05b] Size of Flash connected to B1
sflashB2Size: # [Optional], sflashB2Size; [0x05c-0x05f] Size of Flash connected to B2
value: '0x00000000' # [Required], sflashB2Size; [0x05c-0x05f] Size of Flash connected to B2
csPadSettingOverride: # [Optional], csPadSettingOverride; [0x060-0x063] CS pad setting override value
value: '0x00000000' # [Required], csPadSettingOverride; [0x060-0x063] CS pad setting override value
sclkPadSettingOverride: # [Optional], sclkPadSettingOverride; [0x064-0x067] SCK pad setting override value
value: '0x00000000' # [Required], sclkPadSettingOverride; [0x064-0x067] SCK pad setting override value
dataPadSettingOverride: # [Optional], dataPadSettingOverride; [0x068-0x06b] data pad setting override value
value: '0x00000000' # [Required], dataPadSettingOverride; [0x068-0x06b] data pad setting override value
dqsPadSettingOverride: # [Optional], dqsPadSettingOverride; [0x06c-0x06f] DQS pad setting override value
value: '0x00000000' # [Required], dqsPadSettingOverride; [0x06c-0x06f] DQS pad setting override value
timeoutInMs: # [Optional], timeoutInMs; [0x070-0x073] Timeout threshold for read status command
value: '0x00000000' # [Required], timeoutInMs; [0x070-0x073] Timeout threshold for read status command
commandInterval: # [Optional], commandInterval; [0x074-0x077] CS deselect interval between two commands
value: '0x00000000' # [Required], commandInterval; [0x074-0x077] CS deselect interval between two commands
dataValidTime_0: # [Optional], dataValidTime_0; [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
value: '0x0000' # [Required], dataValidTime_0; [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
dataValidTime_1: # [Optional], dataValidTime_1; [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
value: '0x0000' # [Required], dataValidTime_1; [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
busyOffset: # [Optional], busyOffset; [0x07c-0x07d] Busy offset, valid value: 0-31
value: '0x0000' # [Required], busyOffset; [0x07c-0x07d] Busy offset, valid value: 0-31
busyBitPolarity: # [Optional], busyBitPolarity; [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - busy flag is 0 when flash device is busy
value: '0x0000' # [Required], busyBitPolarity; [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - busy flag is 0 when flash device is busy
lookupTable_0: # [Optional], lookupTable_0; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_0; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_1: # [Optional], lookupTable_1; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_1; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_2: # [Optional], lookupTable_2; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_2; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_3: # [Optional], lookupTable_3; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_3; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_4: # [Optional], lookupTable_4; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_4; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_5: # [Optional], lookupTable_5; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_5; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_6: # [Optional], lookupTable_6; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_6; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_7: # [Optional], lookupTable_7; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_7; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_8: # [Optional], lookupTable_8; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_8; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_9: # [Optional], lookupTable_9; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_9; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_10: # [Optional], lookupTable_10; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_10; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_11: # [Optional], lookupTable_11; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_11; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_12: # [Optional], lookupTable_12; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_12; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_13: # [Optional], lookupTable_13; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_13; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_14: # [Optional], lookupTable_14; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_14; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_15: # [Optional], lookupTable_15; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_15; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_16: # [Optional], lookupTable_16; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_16; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_17: # [Optional], lookupTable_17; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_17; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_18: # [Optional], lookupTable_18; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_18; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_19: # [Optional], lookupTable_19; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_19; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_20: # [Optional], lookupTable_20; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_20; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_21: # [Optional], lookupTable_21; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_21; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_22: # [Optional], lookupTable_22; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_22; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_23: # [Optional], lookupTable_23; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_23; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_24: # [Optional], lookupTable_24; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_24; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_25: # [Optional], lookupTable_25; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_25; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_26: # [Optional], lookupTable_26; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_26; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_27: # [Optional], lookupTable_27; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_27; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_28: # [Optional], lookupTable_28; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_28; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_29: # [Optional], lookupTable_29; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_29; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_30: # [Optional], lookupTable_30; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_30; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_31: # [Optional], lookupTable_31; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_31; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_32: # [Optional], lookupTable_32; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_32; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_33: # [Optional], lookupTable_33; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_33; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_34: # [Optional], lookupTable_34; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_34; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_35: # [Optional], lookupTable_35; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_35; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_36: # [Optional], lookupTable_36; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_36; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_37: # [Optional], lookupTable_37; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_37; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_38: # [Optional], lookupTable_38; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_38; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_39: # [Optional], lookupTable_39; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_39; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_40: # [Optional], lookupTable_40; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_40; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_41: # [Optional], lookupTable_41; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_41; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_42: # [Optional], lookupTable_42; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_42; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_43: # [Optional], lookupTable_43; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_43; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_44: # [Optional], lookupTable_44; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_44; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_45: # [Optional], lookupTable_45; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_45; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_46: # [Optional], lookupTable_46; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_46; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_47: # [Optional], lookupTable_47; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_47; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_48: # [Optional], lookupTable_48; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_48; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_49: # [Optional], lookupTable_49; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_49; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_50: # [Optional], lookupTable_50; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_50; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_51: # [Optional], lookupTable_51; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_51; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_52: # [Optional], lookupTable_52; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_52; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_53: # [Optional], lookupTable_53; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_53; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_54: # [Optional], lookupTable_54; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_54; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_55: # [Optional], lookupTable_55; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_55; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_56: # [Optional], lookupTable_56; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_56; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_57: # [Optional], lookupTable_57; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_57; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_58: # [Optional], lookupTable_58; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_58; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_59: # [Optional], lookupTable_59; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_59; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_60: # [Optional], lookupTable_60; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_60; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_61: # [Optional], lookupTable_61; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_61; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_62: # [Optional], lookupTable_62; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_62; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_63: # [Optional], lookupTable_63; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_63; [0x080-0x17f] Lookup table holds Flash command sequences
lutCustomSeq_0: # [Optional], lutCustomSeq_0; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_1: # [Optional], lutCustomSeq_1; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_2: # [Optional], lutCustomSeq_2; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_3: # [Optional], lutCustomSeq_3; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_4: # [Optional], lutCustomSeq_4; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_5: # [Optional], lutCustomSeq_5; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_6: # [Optional], lutCustomSeq_6; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_7: # [Optional], lutCustomSeq_7; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_8: # [Optional], lutCustomSeq_8; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_9: # [Optional], lutCustomSeq_9; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_10: # [Optional], lutCustomSeq_10; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_11: # [Optional], lutCustomSeq_11; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
reserved4_0: # [Optional], reserved4_0; [0x1b0-0x1bf] Reserved for future use
value: '0x00000000' # [Required], reserved4_0; [0x1b0-0x1bf] Reserved for future use
reserved4_1: # [Optional], reserved4_1; [0x1b0-0x1bf] Reserved for future use
value: '0x00000000' # [Required], reserved4_1; [0x1b0-0x1bf] Reserved for future use
reserved4_2: # [Optional], reserved4_2; [0x1b0-0x1bf] Reserved for future use
value: '0x00000000' # [Required], reserved4_2; [0x1b0-0x1bf] Reserved for future use
reserved4_3: # [Optional], reserved4_3; [0x1b0-0x1bf] Reserved for future use
value: '0x00000000' # [Required], reserved4_3; [0x1b0-0x1bf] Reserved for future use
pageSize: # [Optional], pageSize; Page size of Serial NOR
value: '0x00000000' # [Required], pageSize; Page size of Serial NOR
sectorSize: # [Optional], sectorSize; Sector size of Serial NOR
value: '0x00000000' # [Required], sectorSize; Sector size of Serial NOR
ipcmdSerialClkFreq: # [Optional], ipcmdSerialClkFreq; Clock frequency for IP command
value: '0x00' # [Required], ipcmdSerialClkFreq; Clock frequency for IP command
isUniformBlockSize: # [Optional], isUniformBlockSize; Sector/Block size is the same
value: '0x00' # [Required], isUniformBlockSize; Sector/Block size is the same
reserved0_0: # [Optional], reserved0_0; Reserved for future use
value: '0x00' # [Required], reserved0_0; Reserved for future use
reserved0_1: # [Optional], reserved0_1; Reserved for future use
value: '0x00' # [Required], reserved0_1; Reserved for future use
serialNorType: # [Optional], serialNorType; Serial NOR Flash type: 0/1/2/3
value: '0x00' # [Required], serialNorType; Serial NOR Flash type: 0/1/2/3
needExitNoCmdMode: # [Optional], needExitNoCmdMode; Need to exit NoCmd mode before other IP command
value: '0x00' # [Required], needExitNoCmdMode; Need to exit NoCmd mode before other IP command
halfClkForNonReadCmd: # [Optional], halfClkForNonReadCmd; Half the Serial Clock for non-read command: true/false
value: '0x00' # [Required], halfClkForNonReadCmd; Half the Serial Clock for non-read command: true/false
needRestoreNoCmdMode: # [Optional], needRestoreNoCmdMode; Need to Restore NoCmd mode after IP commmand execution
value: '0x00' # [Required], needRestoreNoCmdMode; Need to Restore NoCmd mode after IP commmand execution
blockSize: # [Optional], blockSize; Block size
value: '0x00000000' # [Required], blockSize; Block size
reserve2_0: # [Optional], reserve2_0; Reserved for future use
value: '0x00000000' # [Required], reserve2_0; Reserved for future use
reserve2_1: # [Optional], reserve2_1; Reserved for future use
value: '0x00000000' # [Required], reserve2_1; Reserved for future use
reserve2_2: # [Optional], reserve2_2; Reserved for future use
value: '0x00000000' # [Required], reserve2_2; Reserved for future use
reserve2_3: # [Optional], reserve2_3; Reserved for future use
value: '0x00000000' # [Required], reserve2_3; Reserved for future use
reserve2_4: # [Optional], reserve2_4; Reserved for future use
value: '0x00000000' # [Required], reserve2_4; Reserved for future use
reserve2_5: # [Optional], reserve2_5; Reserved for future use
value: '0x00000000' # [Required], reserve2_5; Reserved for future use
reserve2_6: # [Optional], reserve2_6; Reserved for future use
value: '0x00000000' # [Required], reserve2_6; Reserved for future use
reserve2_7: # [Optional], reserve2_7; Reserved for future use
value: '0x00000000' # [Required], reserve2_7; Reserved for future use
reserve2_8: # [Optional], reserve2_8; Reserved for future use
value: '0x00000000' # [Required], reserve2_8; Reserved for future use
reserve2_9: # [Optional], reserve2_9; Reserved for future use
value: '0x00000000' # [Required], reserve2_9; Reserved for future use
reserve2_10: # [Optional], reserve2_10; Reserved for future use
value: '0x00000000' # [Required], reserve2_10; Reserved for future use
FCB template for rt118x and flexspi_nor
family(string): MCU family name. Must be one of:["lpc55s3x", "rt101x", "rt102x", "rt104x", "rt105x", "rt106x", "rt116x", "rt117x", "rt118x", "rt5xx", "rt6xx", "rw61x"].revision(string): If needed this could be used to specify silicon revision of device. Must be one of:["latest"].type(string): Specify type of memory used by FCB description. Must be one of:["flexspi_nor"].fcb_settings(object)tag(object): [0x000-0x003] Tag, fixed value 0x42464346UL.value([‘string’, ‘number’], required): [0x000-0x003] Tag, fixed value 0x42464346UL.
version(object): [0x004-0x007] Version,[31:24] -‘V’, [23:16] - Major, [15:8] - Minor, [7:0] - bugfix.bitfields(object, required)bugfix([‘string’, ‘number’]): [07:00] Bugfix - 0.minor([‘string’, ‘number’]): [15:08] Minor.major([‘string’, ‘number’]): [23:16] Major - 1.reserved([‘string’, ‘number’]): [32:24] Ascii ‘V’.
reserved0(object): [0x008-0x00b] Reserved for future use.value([‘string’, ‘number’], required): [0x008-0x00b] Reserved for future use.
readSampleClkSrc(object): [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3.value([‘string’, ‘number’], required): [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3.
csHoldTime(object): [0x00d-0x00d] CS hold time, default value: 3.value([‘string’, ‘number’], required): [0x00d-0x00d] CS hold time, default value: 3.
csSetupTime(object): [0x00e-0x00e] CS setup time, default value: 3.value([‘string’, ‘number’], required): [0x00e-0x00e] CS setup time, default value: 3.
columnAddressWidth(object): [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For Serial NAND, need to refer to datasheet.value([‘string’, ‘number’], required): [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For Serial NAND, need to refer to datasheet.
deviceModeCfgEnable(object): [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable.value([‘string’, ‘number’], required): [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable.
deviceModeType(object): [0x011-0x011] Specify the configuration command type: 0 - Generic, 1 - Quad Enable, 2 - SPI-to-xSPI, 3 - xSPI-to-SPI.value([‘string’, ‘number’], required): [0x011-0x011] Specify the configuration command type: 0 - Generic, 1 - Quad Enable, 2 - SPI-to-xSPI, 3 - xSPI-to-SPI.
waitTimeCfgCommands(object): [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for DPI/QPI/OPI switch or reset command.value([‘string’, ‘number’], required): [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for DPI/QPI/OPI switch or reset command.
deviceModeSeq(object): [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt sequence number, [31:16] Reserved.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
deviceModeArg(object): [0x018-0x01b] Argument/Parameter for device configuration. effective only when deviceModeCfgEnable = 1.value([‘string’, ‘number’], required): [0x018-0x01b] Argument/Parameter for device configuration. effective only when deviceModeCfgEnable = 1.
configCmdEnable(object): [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable.value([‘string’, ‘number’], required): [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable.
reserved1(object): [0x01d-0x019] Reserved for future use.value([‘string’, ‘number’], required): [0x01d-0x019] Reserved for future use.
configCmdSeqs_0(object): [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
configCmdSeqs_1(object): [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
configCmdSeqs_2(object): [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
reserved2(object): [0x02c-0x02f] Reserved for future use.value([‘string’, ‘number’], required): [0x02c-0x02f] Reserved for future use.
configCmdArgs_0(object): [0x030-0x03b] Arguments/Parameters for device Configuration commands.value([‘string’, ‘number’], required): [0x030-0x03b] Arguments/Parameters for device Configuration commands.
configCmdArgs_1(object): [0x030-0x03b] Arguments/Parameters for device Configuration commands.value([‘string’, ‘number’], required): [0x030-0x03b] Arguments/Parameters for device Configuration commands.
configCmdArgs_2(object): [0x030-0x03b] Arguments/Parameters for device Configuration commands.value([‘string’, ‘number’], required): [0x030-0x03b] Arguments/Parameters for device Configuration commands.
reserved3(object): [0x03c-0x03f] Reserved for future use.value([‘string’, ‘number’], required): [0x03c-0x03f] Reserved for future use.
controllerMiscOption(object): [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more details.value([‘string’, ‘number’], required): [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more details.
deviceType(object): [0x044-0x044] Device Type: See Flash Type Definition for more details.value([‘string’, ‘number’], required): [0x044-0x044] Device Type: See Flash Type Definition for more details.
sflashPadType(object): [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal.value([‘string’, ‘number’], required): [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal.
serialClkFreq(object): [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot Chapter for more details.value([‘string’, ‘number’], required): [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot Chapter for more details.
lutCustomSeqEnable(object): [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot be done using 1 LUT sequence, currently, only applicable to HyperFLASH.value([‘string’, ‘number’], required): [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot be done using 1 LUT sequence, currently, only applicable to HyperFLASH.
reserved4(object): [0x048-0x04f] Reserved for future use.value([‘string’, ‘number’], required): [0x048-0x04f] Reserved for future use.
sflashA1Size(object): [0x050-0x053] Size of Flash connected to A1.value([‘string’, ‘number’], required): [0x050-0x053] Size of Flash connected to A1.
sflashA2Size(object): [0x054-0x057] Size of Flash connected to A2.value([‘string’, ‘number’], required): [0x054-0x057] Size of Flash connected to A2.
sflashB1Size(object): [0x058-0x05b] Size of Flash connected to B1.value([‘string’, ‘number’], required): [0x058-0x05b] Size of Flash connected to B1.
sflashB2Size(object): [0x05c-0x05f] Size of Flash connected to B2.value([‘string’, ‘number’], required): [0x05c-0x05f] Size of Flash connected to B2.
csPadSettingOverrideEn(object): [0x060-0x060] Set to 0 if it is not supported.value([‘string’, ‘number’], required): [0x060-0x060] Set to 0 if it is not supported.
csPadSettingOverride(object): [0x061-0x061] Overriding pad setting of CS.value([‘string’, ‘number’], required): [0x061-0x061] Overriding pad setting of CS.
reserved5(object): [0x062-0x063] Reserved for future use.value([‘string’, ‘number’], required): [0x062-0x063] Reserved for future use.
sclkPadSettingOverrideEn(object): [0x064-0x064] Set to 0 if it is not supported.value([‘string’, ‘number’], required): [0x064-0x064] Set to 0 if it is not supported.
sclkPadSettingOverride(object): [0x065-0x065] Overriding pad setting of SCLK.value([‘string’, ‘number’], required): [0x065-0x065] Overriding pad setting of SCLK.
reserved6(object): [0x066-0x067] Reserved for future use.value([‘string’, ‘number’], required): [0x066-0x067] Reserved for future use.
dataPadSettingOverrideEn(object): [0x068-0x068] Set to 0 if it is not supported.value([‘string’, ‘number’], required): [0x068-0x068] Set to 0 if it is not supported.
dataPadSettingOverride(object): [0x069-0x069] Overriding pad setting of data signals.value([‘string’, ‘number’], required): [0x069-0x069] Overriding pad setting of data signals.
reserved7(object): [0x06a-0x06b] Reserved for future use.value([‘string’, ‘number’], required): [0x06a-0x06b] Reserved for future use.
dqsPadSettingOverrideEn(object): [0x06c-0x06c] Set to 0 if it is not supported.value([‘string’, ‘number’], required): [0x06c-0x06c] Set to 0 if it is not supported.
dqsPadSettingOverride(object): [0x06d-0x06d] Overriding pad setting of DQS.value([‘string’, ‘number’], required): [0x06d-0x06d] Overriding pad setting of DQS.
reserved8(object): [0x06e-0x06f] Reserved for future use.value([‘string’, ‘number’], required): [0x06e-0x06f] Reserved for future use.
timeoutInMs(object): [0x070-0x073] Timeout threshold for read status command.value([‘string’, ‘number’], required): [0x070-0x073] Timeout threshold for read status command.
commandInterval(object): [0x074-0x077] CS deselect interval between two commands.value([‘string’, ‘number’], required): [0x074-0x077] CS deselect interval between two commands.
dataValidTime(object): [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns.bitfields(object, required)dllAValidTime([‘string’, ‘number’]): Data valid time for DLLA in terms of 0.1 ns.dllBValidTime([‘string’, ‘number’]): Data valid time for DLLB in terms of 0.1 ns.
busyOffset(object): [0x07c-0x07d] Busy offset, valid value: 0-31.value([‘string’, ‘number’], required): [0x07c-0x07d] Busy offset, valid value: 0-31.
busyBitPolarity(object): [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - busy flag is 0 when flash device is busy.value([‘string’, ‘number’], required): [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - busy flag is 0 when flash device is busy.
lookupTable_0(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_1(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_2(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_3(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_4(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_5(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_6(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_7(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_8(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_9(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_10(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_11(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_12(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_13(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_14(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_15(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_16(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_17(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_18(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_19(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_20(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_21(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_22(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_23(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_24(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_25(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_26(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_27(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_28(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_29(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_30(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_31(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_32(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_33(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_34(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_35(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_36(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_37(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_38(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_39(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_40(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_41(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_42(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_43(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_44(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_45(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_46(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_47(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_48(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_49(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_50(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_51(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_52(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_53(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_54(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_55(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_56(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_57(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_58(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_59(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_60(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_61(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_62(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lookupTable_63(object): [0x080-0x17f] Lookup table holds Flash command sequences.value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences.
lutCustomSeq_0(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_1(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_2(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_3(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_4(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_5(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_6(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_7(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_8(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_9(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_10(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_11(object): [0x180-0x1af] Customizable LUT Sequences.bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16.seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15.reserved([‘string’, ‘number’]): N/A.
reserved9_0(object): [0x1b0-0x1bf] Reserved for future use.value([‘string’, ‘number’], required): [0x1b0-0x1bf] Reserved for future use.
reserved9_1(object): [0x1b0-0x1bf] Reserved for future use.value([‘string’, ‘number’], required): [0x1b0-0x1bf] Reserved for future use.
reserved9_2(object): [0x1b0-0x1bf] Reserved for future use.value([‘string’, ‘number’], required): [0x1b0-0x1bf] Reserved for future use.
reserved9_3(object): [0x1b0-0x1bf] Reserved for future use.value([‘string’, ‘number’], required): [0x1b0-0x1bf] Reserved for future use.
pageSize(object): Page size of Serial NOR.value([‘string’, ‘number’], required): Page size of Serial NOR.
sectorSize(object): Sector size of Serial NOR.value([‘string’, ‘number’], required): Sector size of Serial NOR.
ipcmdSerialClkFreq(object): Clock frequency for IP command.value([‘string’, ‘number’], required): Clock frequency for IP command.
isUniformBlockSize(object): Sector/Block size is the same.value([‘string’, ‘number’], required): Sector/Block size is the same.
isDataOrderSwapped(object): The data order is swapped in OPI DDR mode.value([‘string’, ‘number’], required): The data order is swapped in OPI DDR mode.
reserved10_0(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserved10_1(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserved10_2(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserved10_3(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserved10_4(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
blockSize(object): Block size.value([‘string’, ‘number’], required): Block size.
flashStateCtx(object): Flash State Context after being configured.bitfields(object, required)flashPorMode([‘string’, ‘number’]): Flash POR Mode.flashCurrentMode([‘string’, ‘number’]): Sequence Number, valid number: 1-16.reserved([‘string’, ‘number’]): Sequence Number, valid number: 1-16.flashRestoringSequence([‘string’, ‘number’]): Sequence Number, valid number: 1-16.
reserved11_0(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserved11_1(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserved11_2(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserved11_3(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserved11_4(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserved11_5(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserved11_6(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserved11_7(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserved11_8(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
reserved11_9(object): Reserved for future use.value([‘string’, ‘number’], required): Reserved for future use.
# =========== FCB template for rt118x and flexspi_nor ===========
# ----------------------------------------------------------------------------------------------------
# == FCB template for rt118x and flexspi_nor ==
# ----------------------------------------------------------------------------------------------------
family: CHOOSE_FROM_TABLE # [Required], MCU family name; Possible options:['lpc55s3x', 'rt101x', 'rt102x', 'rt104x', 'rt105x', 'rt106x', 'rt116x', 'rt117x', 'rt118x', 'rt5xx', 'rt6xx', 'rw61x']
revision: a1 # [Optional], Chip silicon revision; If needed this could be used to specify silicon revision of device; Possible options:['latest']
type: flexspi_nor # [Required], Memory type; Specify type of memory used by FCB description; Possible options:['flexspi_nor']
fcb_settings: # [Required], rt118x
tag: # [Optional], tag; [0x000-0x003] Tag, fixed value 0x42464346UL
value: '0x00000000' # [Required], tag; [0x000-0x003] Tag, fixed value 0x42464346UL
version: # [Optional], version; [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix
bitfields: # [Required]
bugfix: 0 # [Optional], bugfix; [07:00] Bugfix - 0
minor: 0 # [Optional], minor; [15:08] Minor
major: 1 # [Optional], major; [23:16] Major - 1
reserved: 86 # [Optional], reserved; [32:24] Ascii 'V'
reserved0: # [Optional], reserved0; [0x008-0x00b] Reserved for future use
value: '0x00000000' # [Required], reserved0; [0x008-0x00b] Reserved for future use
readSampleClkSrc: # [Optional], readSampleClkSrc; [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3
value: '0x00' # [Required], readSampleClkSrc; [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3
csHoldTime: # [Optional], csHoldTime; [0x00d-0x00d] CS hold time, default value: 3
value: '0x00' # [Required], csHoldTime; [0x00d-0x00d] CS hold time, default value: 3
csSetupTime: # [Optional], csSetupTime; [0x00e-0x00e] CS setup time, default value: 3
value: '0x00' # [Required], csSetupTime; [0x00e-0x00e] CS setup time, default value: 3
columnAddressWidth: # [Optional], columnAddressWidth; [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For Serial NAND, need to refer to datasheet
value: '0x00' # [Required], columnAddressWidth; [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For Serial NAND, need to refer to datasheet
deviceModeCfgEnable: # [Optional], deviceModeCfgEnable; [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable
value: '0x00' # [Required], deviceModeCfgEnable; [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable
deviceModeType: # [Optional], deviceModeType; [0x011-0x011] Specify the configuration command type: 0 - Generic, 1 - Quad Enable, 2 - SPI-to-xSPI, 3 - xSPI-to-SPI
value: '0x00' # [Required], deviceModeType; [0x011-0x011] Specify the configuration command type: 0 - Generic, 1 - Quad Enable, 2 - SPI-to-xSPI, 3 - xSPI-to-SPI
waitTimeCfgCommands: # [Optional], waitTimeCfgCommands; [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for DPI/QPI/OPI switch or reset command
value: '0x0000' # [Required], waitTimeCfgCommands; [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for DPI/QPI/OPI switch or reset command
deviceModeSeq: # [Optional], deviceModeSeq; [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt sequence number, [31:16] Reserved
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
deviceModeArg: # [Optional], deviceModeArg; [0x018-0x01b] Argument/Parameter for device configuration. effective only when deviceModeCfgEnable = 1
value: '0x00000000' # [Required], deviceModeArg; [0x018-0x01b] Argument/Parameter for device configuration. effective only when deviceModeCfgEnable = 1
configCmdEnable: # [Optional], configCmdEnable; [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable
value: '0x00' # [Required], configCmdEnable; [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable
reserved1: # [Optional], reserved1; [0x01d-0x019] Reserved for future use
value: '0x000000' # [Required], reserved1; [0x01d-0x019] Reserved for future use
configCmdSeqs_0: # [Optional], configCmdSeqs_0; [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
configCmdSeqs_1: # [Optional], configCmdSeqs_1; [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
configCmdSeqs_2: # [Optional], configCmdSeqs_2; [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
reserved2: # [Optional], reserved2; [0x02c-0x02f] Reserved for future use
value: '0x00000000' # [Required], reserved2; [0x02c-0x02f] Reserved for future use
configCmdArgs_0: # [Optional], configCmdArgs_0; [0x030-0x03b] Arguments/Parameters for device Configuration commands
value: '0x00000000' # [Required], configCmdArgs_0; [0x030-0x03b] Arguments/Parameters for device Configuration commands
configCmdArgs_1: # [Optional], configCmdArgs_1; [0x030-0x03b] Arguments/Parameters for device Configuration commands
value: '0x00000000' # [Required], configCmdArgs_1; [0x030-0x03b] Arguments/Parameters for device Configuration commands
configCmdArgs_2: # [Optional], configCmdArgs_2; [0x030-0x03b] Arguments/Parameters for device Configuration commands
value: '0x00000000' # [Required], configCmdArgs_2; [0x030-0x03b] Arguments/Parameters for device Configuration commands
reserved3: # [Optional], reserved3; [0x03c-0x03f] Reserved for future use
value: '0x00000000' # [Required], reserved3; [0x03c-0x03f] Reserved for future use
controllerMiscOption: # [Optional], controllerMiscOption; [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more details
value: '0x00000000' # [Required], controllerMiscOption; [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more details
deviceType: # [Optional], deviceType; [0x044-0x044] Device Type: See Flash Type Definition for more details
value: '0x00' # [Required], deviceType; [0x044-0x044] Device Type: See Flash Type Definition for more details
sflashPadType: # [Optional], sflashPadType; [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
value: '0x00' # [Required], sflashPadType; [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
serialClkFreq: # [Optional], serialClkFreq; [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot Chapter for more details
value: '0x00' # [Required], serialClkFreq; [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot Chapter for more details
lutCustomSeqEnable: # [Optional], lutCustomSeqEnable; [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot be done using 1 LUT sequence, currently, only applicable to HyperFLASH
value: '0x00' # [Required], lutCustomSeqEnable; [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot be done using 1 LUT sequence, currently, only applicable to HyperFLASH
reserved4: # [Optional], reserved4; [0x048-0x04f] Reserved for future use
value: '0x0000000000000000' # [Required], reserved4; [0x048-0x04f] Reserved for future use
sflashA1Size: # [Optional], sflashA1Size; [0x050-0x053] Size of Flash connected to A1
value: '0x00000000' # [Required], sflashA1Size; [0x050-0x053] Size of Flash connected to A1
sflashA2Size: # [Optional], sflashA2Size; [0x054-0x057] Size of Flash connected to A2
value: '0x00000000' # [Required], sflashA2Size; [0x054-0x057] Size of Flash connected to A2
sflashB1Size: # [Optional], sflashB1Size; [0x058-0x05b] Size of Flash connected to B1
value: '0x00000000' # [Required], sflashB1Size; [0x058-0x05b] Size of Flash connected to B1
sflashB2Size: # [Optional], sflashB2Size; [0x05c-0x05f] Size of Flash connected to B2
value: '0x00000000' # [Required], sflashB2Size; [0x05c-0x05f] Size of Flash connected to B2
csPadSettingOverrideEn: # [Optional], csPadSettingOverrideEn; [0x060-0x060] Set to 0 if it is not supported
value: '0x00' # [Required], csPadSettingOverrideEn; [0x060-0x060] Set to 0 if it is not supported
csPadSettingOverride: # [Optional], csPadSettingOverride; [0x061-0x061] Overriding pad setting of CS
value: '0x00' # [Required], csPadSettingOverride; [0x061-0x061] Overriding pad setting of CS
reserved5: # [Optional], reserved5; [0x062-0x063] Reserved for future use
value: '0x0000' # [Required], reserved5; [0x062-0x063] Reserved for future use
sclkPadSettingOverrideEn: # [Optional], sclkPadSettingOverrideEn; [0x064-0x064] Set to 0 if it is not supported
value: '0x00' # [Required], sclkPadSettingOverrideEn; [0x064-0x064] Set to 0 if it is not supported
sclkPadSettingOverride: # [Optional], sclkPadSettingOverride; [0x065-0x065] Overriding pad setting of SCLK
value: '0x00' # [Required], sclkPadSettingOverride; [0x065-0x065] Overriding pad setting of SCLK
reserved6: # [Optional], reserved6; [0x066-0x067] Reserved for future use
value: '0x0000' # [Required], reserved6; [0x066-0x067] Reserved for future use
dataPadSettingOverrideEn: # [Optional], dataPadSettingOverrideEn; [0x068-0x068] Set to 0 if it is not supported
value: '0x00' # [Required], dataPadSettingOverrideEn; [0x068-0x068] Set to 0 if it is not supported
dataPadSettingOverride: # [Optional], dataPadSettingOverride; [0x069-0x069] Overriding pad setting of data signals
value: '0x00' # [Required], dataPadSettingOverride; [0x069-0x069] Overriding pad setting of data signals
reserved7: # [Optional], reserved7; [0x06a-0x06b] Reserved for future use
value: '0x0000' # [Required], reserved7; [0x06a-0x06b] Reserved for future use
dqsPadSettingOverrideEn: # [Optional], dqsPadSettingOverrideEn; [0x06c-0x06c] Set to 0 if it is not supported
value: '0x00' # [Required], dqsPadSettingOverrideEn; [0x06c-0x06c] Set to 0 if it is not supported
dqsPadSettingOverride: # [Optional], dqsPadSettingOverride; [0x06d-0x06d] Overriding pad setting of DQS
value: '0x00' # [Required], dqsPadSettingOverride; [0x06d-0x06d] Overriding pad setting of DQS
reserved8: # [Optional], reserved8; [0x06e-0x06f] Reserved for future use
value: '0x0000' # [Required], reserved8; [0x06e-0x06f] Reserved for future use
timeoutInMs: # [Optional], timeoutInMs; [0x070-0x073] Timeout threshold for read status command
value: '0x00000000' # [Required], timeoutInMs; [0x070-0x073] Timeout threshold for read status command
commandInterval: # [Optional], commandInterval; [0x074-0x077] CS deselect interval between two commands
value: '0x00000000' # [Required], commandInterval; [0x074-0x077] CS deselect interval between two commands
dataValidTime: # [Optional], dataValidTime; [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
bitfields: # [Required]
dllAValidTime: 0 # [Optional], dllAValidTime; Data valid time for DLLA in terms of 0.1 ns
dllBValidTime: 0 # [Optional], dllBValidTime; Data valid time for DLLB in terms of 0.1 ns
busyOffset: # [Optional], busyOffset; [0x07c-0x07d] Busy offset, valid value: 0-31
value: '0x0000' # [Required], busyOffset; [0x07c-0x07d] Busy offset, valid value: 0-31
busyBitPolarity: # [Optional], busyBitPolarity; [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - busy flag is 0 when flash device is busy
value: '0x0000' # [Required], busyBitPolarity; [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - busy flag is 0 when flash device is busy
lookupTable_0: # [Optional], lookupTable_0; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_0; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_1: # [Optional], lookupTable_1; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_1; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_2: # [Optional], lookupTable_2; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_2; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_3: # [Optional], lookupTable_3; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_3; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_4: # [Optional], lookupTable_4; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_4; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_5: # [Optional], lookupTable_5; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_5; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_6: # [Optional], lookupTable_6; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_6; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_7: # [Optional], lookupTable_7; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_7; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_8: # [Optional], lookupTable_8; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_8; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_9: # [Optional], lookupTable_9; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_9; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_10: # [Optional], lookupTable_10; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_10; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_11: # [Optional], lookupTable_11; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_11; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_12: # [Optional], lookupTable_12; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_12; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_13: # [Optional], lookupTable_13; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_13; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_14: # [Optional], lookupTable_14; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_14; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_15: # [Optional], lookupTable_15; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_15; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_16: # [Optional], lookupTable_16; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_16; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_17: # [Optional], lookupTable_17; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_17; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_18: # [Optional], lookupTable_18; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_18; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_19: # [Optional], lookupTable_19; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_19; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_20: # [Optional], lookupTable_20; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_20; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_21: # [Optional], lookupTable_21; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_21; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_22: # [Optional], lookupTable_22; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_22; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_23: # [Optional], lookupTable_23; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_23; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_24: # [Optional], lookupTable_24; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_24; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_25: # [Optional], lookupTable_25; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_25; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_26: # [Optional], lookupTable_26; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_26; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_27: # [Optional], lookupTable_27; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_27; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_28: # [Optional], lookupTable_28; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_28; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_29: # [Optional], lookupTable_29; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_29; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_30: # [Optional], lookupTable_30; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_30; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_31: # [Optional], lookupTable_31; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_31; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_32: # [Optional], lookupTable_32; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_32; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_33: # [Optional], lookupTable_33; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_33; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_34: # [Optional], lookupTable_34; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_34; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_35: # [Optional], lookupTable_35; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_35; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_36: # [Optional], lookupTable_36; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_36; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_37: # [Optional], lookupTable_37; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_37; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_38: # [Optional], lookupTable_38; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_38; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_39: # [Optional], lookupTable_39; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_39; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_40: # [Optional], lookupTable_40; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_40; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_41: # [Optional], lookupTable_41; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_41; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_42: # [Optional], lookupTable_42; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_42; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_43: # [Optional], lookupTable_43; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_43; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_44: # [Optional], lookupTable_44; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_44; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_45: # [Optional], lookupTable_45; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_45; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_46: # [Optional], lookupTable_46; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_46; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_47: # [Optional], lookupTable_47; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_47; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_48: # [Optional], lookupTable_48; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_48; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_49: # [Optional], lookupTable_49; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_49; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_50: # [Optional], lookupTable_50; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_50; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_51: # [Optional], lookupTable_51; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_51; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_52: # [Optional], lookupTable_52; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_52; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_53: # [Optional], lookupTable_53; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_53; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_54: # [Optional], lookupTable_54; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_54; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_55: # [Optional], lookupTable_55; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_55; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_56: # [Optional], lookupTable_56; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_56; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_57: # [Optional], lookupTable_57; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_57; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_58: # [Optional], lookupTable_58; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_58; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_59: # [Optional], lookupTable_59; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_59; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_60: # [Optional], lookupTable_60; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_60; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_61: # [Optional], lookupTable_61; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_61; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_62: # [Optional], lookupTable_62; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_62; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_63: # [Optional], lookupTable_63; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_63; [0x080-0x17f] Lookup table holds Flash command sequences
lutCustomSeq_0: # [Optional], lutCustomSeq_0; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_1: # [Optional], lutCustomSeq_1; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_2: # [Optional], lutCustomSeq_2; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_3: # [Optional], lutCustomSeq_3; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_4: # [Optional], lutCustomSeq_4; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_5: # [Optional], lutCustomSeq_5; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_6: # [Optional], lutCustomSeq_6; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_7: # [Optional], lutCustomSeq_7; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_8: # [Optional], lutCustomSeq_8; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_9: # [Optional], lutCustomSeq_9; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_10: # [Optional], lutCustomSeq_10; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_11: # [Optional], lutCustomSeq_11; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
reserved9_0: # [Optional], reserved9_0; [0x1b0-0x1bf] Reserved for future use
value: '0x00000000' # [Required], reserved9_0; [0x1b0-0x1bf] Reserved for future use
reserved9_1: # [Optional], reserved9_1; [0x1b0-0x1bf] Reserved for future use
value: '0x00000000' # [Required], reserved9_1; [0x1b0-0x1bf] Reserved for future use
reserved9_2: # [Optional], reserved9_2; [0x1b0-0x1bf] Reserved for future use
value: '0x00000000' # [Required], reserved9_2; [0x1b0-0x1bf] Reserved for future use
reserved9_3: # [Optional], reserved9_3; [0x1b0-0x1bf] Reserved for future use
value: '0x00000000' # [Required], reserved9_3; [0x1b0-0x1bf] Reserved for future use
pageSize: # [Optional], pageSize; Page size of Serial NOR
value: '0x00000000' # [Required], pageSize; Page size of Serial NOR
sectorSize: # [Optional], sectorSize; Sector size of Serial NOR
value: '0x00000000' # [Required], sectorSize; Sector size of Serial NOR
ipcmdSerialClkFreq: # [Optional], ipcmdSerialClkFreq; Clock frequency for IP command
value: '0x00' # [Required], ipcmdSerialClkFreq; Clock frequency for IP command
isUniformBlockSize: # [Optional], isUniformBlockSize; Sector/Block size is the same
value: '0x00' # [Required], isUniformBlockSize; Sector/Block size is the same
isDataOrderSwapped: # [Optional], isDataOrderSwapped; The data order is swapped in OPI DDR mode
value: '0x00' # [Required], isDataOrderSwapped; The data order is swapped in OPI DDR mode
reserved10_0: # [Optional], reserved10_0; Reserved for future use
value: '0x00' # [Required], reserved10_0; Reserved for future use
reserved10_1: # [Optional], reserved10_1; Reserved for future use
value: '0x00' # [Required], reserved10_1; Reserved for future use
reserved10_2: # [Optional], reserved10_2; Reserved for future use
value: '0x00' # [Required], reserved10_2; Reserved for future use
reserved10_3: # [Optional], reserved10_3; Reserved for future use
value: '0x00' # [Required], reserved10_3; Reserved for future use
reserved10_4: # [Optional], reserved10_4; Reserved for future use
value: '0x00' # [Required], reserved10_4; Reserved for future use
blockSize: # [Optional], blockSize; Block size
value: '0x00000000' # [Required], blockSize; Block size
flashStateCtx: # [Optional], flashStateCtx; Flash State Context after being configured
bitfields: # [Required]
flashPorMode: 0 # [Optional], flashPorMode; Flash POR Mode
flashCurrentMode: 0 # [Optional], flashCurrentMode; Sequence Number, valid number: 1-16
reserved: 0 # [Optional], reserved; Sequence Number, valid number: 1-16
flashRestoringSequence: 0 # [Optional], flashRestoringSequence; Sequence Number, valid number: 1-16
reserved11_0: # [Optional], reserved11_0; Reserved for future use
value: '0x00000000' # [Required], reserved11_0; Reserved for future use
reserved11_1: # [Optional], reserved11_1; Reserved for future use
value: '0x00000000' # [Required], reserved11_1; Reserved for future use
reserved11_2: # [Optional], reserved11_2; Reserved for future use
value: '0x00000000' # [Required], reserved11_2; Reserved for future use
reserved11_3: # [Optional], reserved11_3; Reserved for future use
value: '0x00000000' # [Required], reserved11_3; Reserved for future use
reserved11_4: # [Optional], reserved11_4; Reserved for future use
value: '0x00000000' # [Required], reserved11_4; Reserved for future use
reserved11_5: # [Optional], reserved11_5; Reserved for future use
value: '0x00000000' # [Required], reserved11_5; Reserved for future use
reserved11_6: # [Optional], reserved11_6; Reserved for future use
value: '0x00000000' # [Required], reserved11_6; Reserved for future use
reserved11_7: # [Optional], reserved11_7; Reserved for future use
value: '0x00000000' # [Required], reserved11_7; Reserved for future use
reserved11_8: # [Optional], reserved11_8; Reserved for future use
value: '0x00000000' # [Required], reserved11_8; Reserved for future use
reserved11_9: # [Optional], reserved11_9; Reserved for future use
value: '0x00000000' # [Required], reserved11_9; Reserved for future use
FCB template for rt5xx and flexspi_nor
family(string): MCU family name. Must be one of:["lpc55s3x", "rt101x", "rt102x", "rt104x", "rt105x", "rt106x", "rt116x", "rt117x", "rt118x", "rt5xx", "rt6xx", "rw61x"].revision(string): If needed this could be used to specify silicon revision of device. Must be one of:["latest"].type(string): Specify type of memory used by FCB description. Must be one of:["flexspi_nor"].fcb_settings(object)tag(object): [0x000-0x003] Tag, fixed value 0x42464346UL .value([‘string’, ‘number’], required): [0x000-0x003] Tag, fixed value 0x42464346UL .
version(object): [0x004-0x007] Version,[31:24] -‘V’, [23:16] - Major, [15:8] - Minor, [7:0] - bugfix .value([‘string’, ‘number’], required): [0x004-0x007] Version,[31:24] -‘V’, [23:16] - Major, [15:8] - Minor, [7:0] - bugfix .
reserved0(object): [0x008-0x00b] Reserved for future use .value([‘string’, ‘number’], required): [0x008-0x00b] Reserved for future use .
readSampleClkSrc(object): [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3 .value([‘string’, ‘number’], required): [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3 .
csHoldTime(object): [0x00d-0x00d] CS hold time, default value: 3 .value([‘string’, ‘number’], required): [0x00d-0x00d] CS hold time, default value: 3 .
csSetupTime(object): [0x00e-0x00e] CS setup time, default value: 3 .value([‘string’, ‘number’], required): [0x00e-0x00e] CS setup time, default value: 3 .
columnAddressWidth(object): [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For Serial NAND, need to refer to datasheet .value([‘string’, ‘number’], required): [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For Serial NAND, need to refer to datasheet .
deviceModeCfgEnable(object): [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable .value([‘string’, ‘number’], required): [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable .
deviceModeType(object): [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, Generic configuration, etc. .value([‘string’, ‘number’], required): [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, Generic configuration, etc. .
waitTimeCfgCommands(object): [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for DPI/QPI/OPI switch or reset command .value([‘string’, ‘number’], required): [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for DPI/QPI/OPI switch or reset command .
deviceModeSeq(object): [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt sequence number, [31:16] Reserved .bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16 .seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15 .reserved([‘string’, ‘number’]): N/A.
deviceModeArg(object): [0x018-0x01b] Argument/Parameter for device configuration .value([‘string’, ‘number’], required): [0x018-0x01b] Argument/Parameter for device configuration .
configCmdEnable(object): [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable .value([‘string’, ‘number’], required): [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable .
configModeType_0(object): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe .value([‘string’, ‘number’], required): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe .
configModeType_1(object): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe .value([‘string’, ‘number’], required): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe .
configModeType_2(object): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe .value([‘string’, ‘number’], required): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe .
configCmdSeqs_0(object): [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq .bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16 .seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15 .reserved([‘string’, ‘number’]): N/A.
configCmdSeqs_1(object): [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq .bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16 .seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15 .reserved([‘string’, ‘number’]): N/A.
configCmdSeqs_2(object): [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq .bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16 .seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15 .reserved([‘string’, ‘number’]): N/A.
reserved1(object): [0x02c-0x02f] Reserved for future use .value([‘string’, ‘number’], required): [0x02c-0x02f] Reserved for future use .
configCmdArgs_0(object): [0x030-0x03b] Arguments/Parameters for device Configuration commands .value([‘string’, ‘number’], required): [0x030-0x03b] Arguments/Parameters for device Configuration commands .
configCmdArgs_1(object): [0x030-0x03b] Arguments/Parameters for device Configuration commands .value([‘string’, ‘number’], required): [0x030-0x03b] Arguments/Parameters for device Configuration commands .
configCmdArgs_2(object): [0x030-0x03b] Arguments/Parameters for device Configuration commands .value([‘string’, ‘number’], required): [0x030-0x03b] Arguments/Parameters for device Configuration commands .
reserved2(object): [0x03c-0x03f] Reserved for future use .value([‘string’, ‘number’], required): [0x03c-0x03f] Reserved for future use .
controllerMiscOption(object): [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more details .value([‘string’, ‘number’], required): [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more details .
deviceType(object): [0x044-0x044] Device Type: See Flash Type Definition for more details .value([‘string’, ‘number’], required): [0x044-0x044] Device Type: See Flash Type Definition for more details .
sflashPadType(object): [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal .value([‘string’, ‘number’], required): [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal .
serialClkFreq(object): [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot Chapter for more details .value([‘string’, ‘number’], required): [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot Chapter for more details .
lutCustomSeqEnable(object): [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot be done using 1 LUT sequence, currently, only applicable to HyperFLASH .value([‘string’, ‘number’], required): [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot be done using 1 LUT sequence, currently, only applicable to HyperFLASH .
reserved3_0(object): [0x048-0x04f] Reserved for future use .value([‘string’, ‘number’], required): [0x048-0x04f] Reserved for future use .
reserved3_1(object): [0x048-0x04f] Reserved for future use .value([‘string’, ‘number’], required): [0x048-0x04f] Reserved for future use .
sflashA1Size(object): [0x050-0x053] Size of Flash connected to A1 .value([‘string’, ‘number’], required): [0x050-0x053] Size of Flash connected to A1 .
sflashA2Size(object): [0x054-0x057] Size of Flash connected to A2 .value([‘string’, ‘number’], required): [0x054-0x057] Size of Flash connected to A2 .
sflashB1Size(object): [0x058-0x05b] Size of Flash connected to B1 .value([‘string’, ‘number’], required): [0x058-0x05b] Size of Flash connected to B1 .
sflashB2Size(object): [0x05c-0x05f] Size of Flash connected to B2 .value([‘string’, ‘number’], required): [0x05c-0x05f] Size of Flash connected to B2 .
csPadSettingOverride(object): [0x060-0x063] CS pad setting override value .value([‘string’, ‘number’], required): [0x060-0x063] CS pad setting override value .
sclkPadSettingOverride(object): [0x064-0x067] SCK pad setting override value .value([‘string’, ‘number’], required): [0x064-0x067] SCK pad setting override value .
dataPadSettingOverride(object): [0x068-0x06b] data pad setting override value .value([‘string’, ‘number’], required): [0x068-0x06b] data pad setting override value .
dqsPadSettingOverride(object): [0x06c-0x06f] DQS pad setting override value .value([‘string’, ‘number’], required): [0x06c-0x06f] DQS pad setting override value .
timeoutInMs(object): [0x070-0x073] Timeout threshold for read status command .value([‘string’, ‘number’], required): [0x070-0x073] Timeout threshold for read status command .
commandInterval(object): [0x074-0x077] CS deselect interval between two commands .value([‘string’, ‘number’], required): [0x074-0x077] CS deselect interval between two commands .
dataValidTime_0(object): [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B .bitfields(object, required)time_100ps([‘string’, ‘number’]): Data valid time, in terms of 100ps .delay_cells([‘string’, ‘number’]): Data valid time, in terms of delay cells .
dataValidTime_1(object): [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B .bitfields(object, required)time_100ps([‘string’, ‘number’]): Data valid time, in terms of 100ps .delay_cells([‘string’, ‘number’]): Data valid time, in terms of delay cells .
busyOffset(object): [0x07c-0x07d] Busy offset, valid value: 0-31 .value([‘string’, ‘number’], required): [0x07c-0x07d] Busy offset, valid value: 0-31 .
busyBitPolarity(object): [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - busy flag is 0 when flash device is busy .value([‘string’, ‘number’], required): [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - busy flag is 0 when flash device is busy .
lookupTable_0(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_1(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_2(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_3(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_4(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_5(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_6(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_7(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_8(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_9(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_10(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_11(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_12(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_13(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_14(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_15(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_16(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_17(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_18(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_19(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_20(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_21(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_22(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_23(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_24(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_25(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_26(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_27(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_28(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_29(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_30(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_31(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_32(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_33(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_34(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_35(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_36(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_37(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_38(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_39(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_40(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_41(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_42(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_43(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_44(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_45(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_46(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_47(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_48(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_49(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_50(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_51(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_52(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_53(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_54(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_55(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_56(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_57(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_58(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_59(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_60(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_61(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_62(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_63(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lutCustomSeq_0(object): [0x180-0x1af] Customizable LUT Sequences .bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16 .seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15 .reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_1(object): [0x180-0x1af] Customizable LUT Sequences .bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16 .seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15 .reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_2(object): [0x180-0x1af] Customizable LUT Sequences .bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16 .seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15 .reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_3(object): [0x180-0x1af] Customizable LUT Sequences .bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16 .seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15 .reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_4(object): [0x180-0x1af] Customizable LUT Sequences .bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16 .seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15 .reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_5(object): [0x180-0x1af] Customizable LUT Sequences .bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16 .seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15 .reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_6(object): [0x180-0x1af] Customizable LUT Sequences .bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16 .seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15 .reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_7(object): [0x180-0x1af] Customizable LUT Sequences .bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16 .seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15 .reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_8(object): [0x180-0x1af] Customizable LUT Sequences .bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16 .seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15 .reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_9(object): [0x180-0x1af] Customizable LUT Sequences .bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16 .seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15 .reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_10(object): [0x180-0x1af] Customizable LUT Sequences .bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16 .seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15 .reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_11(object): [0x180-0x1af] Customizable LUT Sequences .bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16 .seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15 .reserved([‘string’, ‘number’]): N/A.
reserved4_0(object): [0x1b0-0x1bf] Reserved for future use .value([‘string’, ‘number’], required): [0x1b0-0x1bf] Reserved for future use .
reserved4_1(object): [0x1b0-0x1bf] Reserved for future use .value([‘string’, ‘number’], required): [0x1b0-0x1bf] Reserved for future use .
reserved4_2(object): [0x1b0-0x1bf] Reserved for future use .value([‘string’, ‘number’], required): [0x1b0-0x1bf] Reserved for future use .
reserved4_3(object): [0x1b0-0x1bf] Reserved for future use .value([‘string’, ‘number’], required): [0x1b0-0x1bf] Reserved for future use .
pageSize(object): Page size of Serial NOR .value([‘string’, ‘number’], required): Page size of Serial NOR .
sectorSize(object): Sector size of Serial NOR .value([‘string’, ‘number’], required): Sector size of Serial NOR .
ipcmdSerialClkFreq(object): Clock frequency for IP command .value([‘string’, ‘number’], required): Clock frequency for IP command .
isUniformBlockSize(object): Sector/Block size is the same .value([‘string’, ‘number’], required): Sector/Block size is the same .
isDataOrderSwapped(object): Data order (D0, D1, D2, D3) is swapped (D1,D0, D3, D2) .value([‘string’, ‘number’], required): Data order (D0, D1, D2, D3) is swapped (D1,D0, D3, D2) .
reserved0_0(object): Reserved for future use .value([‘string’, ‘number’], required): Reserved for future use .
serialNorType(object): Serial NOR Flash type: 0/1/2/3 .value([‘string’, ‘number’], required): Serial NOR Flash type: 0/1/2/3 .
needExitNoCmdMode(object): Need to exit NoCmd mode before other IP command .value([‘string’, ‘number’], required): Need to exit NoCmd mode before other IP command .
halfClkForNonReadCmd(object): Half the Serial Clock for non-read command: true/false .value([‘string’, ‘number’], required): Half the Serial Clock for non-read command: true/false .
needRestoreNoCmdMode(object): Need to Restore NoCmd mode after IP commmand execution .value([‘string’, ‘number’], required): Need to Restore NoCmd mode after IP commmand execution .
blockSize(object): Block size .value([‘string’, ‘number’], required): Block size .
flashStateCtx(object): Flash State Context .value([‘string’, ‘number’], required): Flash State Context .
reserve2_0(object): Reserved for future use .value([‘string’, ‘number’], required): Reserved for future use .
reserve2_1(object): Reserved for future use .value([‘string’, ‘number’], required): Reserved for future use .
reserve2_2(object): Reserved for future use .value([‘string’, ‘number’], required): Reserved for future use .
reserve2_3(object): Reserved for future use .value([‘string’, ‘number’], required): Reserved for future use .
reserve2_4(object): Reserved for future use .value([‘string’, ‘number’], required): Reserved for future use .
reserve2_5(object): Reserved for future use .value([‘string’, ‘number’], required): Reserved for future use .
reserve2_6(object): Reserved for future use .value([‘string’, ‘number’], required): Reserved for future use .
reserve2_7(object): Reserved for future use .value([‘string’, ‘number’], required): Reserved for future use .
reserve2_8(object): Reserved for future use .value([‘string’, ‘number’], required): Reserved for future use .
reserve2_9(object): Reserved for future use .value([‘string’, ‘number’], required): Reserved for future use .
# =========== FCB template for rt5xx and flexspi_nor ===========
# ----------------------------------------------------------------------------------------------------
# == FCB template for rt5xx and flexspi_nor ==
# ----------------------------------------------------------------------------------------------------
family: CHOOSE_FROM_TABLE # [Required], MCU family name; Possible options:['lpc55s3x', 'rt101x', 'rt102x', 'rt104x', 'rt105x', 'rt106x', 'rt116x', 'rt117x', 'rt118x', 'rt5xx', 'rt6xx', 'rw61x']
revision: a1 # [Optional], Chip silicon revision; If needed this could be used to specify silicon revision of device; Possible options:['latest']
type: flexspi_nor # [Required], Memory type; Specify type of memory used by FCB description; Possible options:['flexspi_nor']
fcb_settings: # [Required], rt5xx
tag: # [Optional], tag; [0x000-0x003] Tag, fixed value 0x42464346UL
value: '0x00000000' # [Required], tag; [0x000-0x003] Tag, fixed value 0x42464346UL
version: # [Optional], version; [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix
value: '0x00000000' # [Required], version; [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix
reserved0: # [Optional], reserved0; [0x008-0x00b] Reserved for future use
value: '0x00000000' # [Required], reserved0; [0x008-0x00b] Reserved for future use
readSampleClkSrc: # [Optional], readSampleClkSrc; [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3
value: '0x00' # [Required], readSampleClkSrc; [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3
csHoldTime: # [Optional], csHoldTime; [0x00d-0x00d] CS hold time, default value: 3
value: '0x00' # [Required], csHoldTime; [0x00d-0x00d] CS hold time, default value: 3
csSetupTime: # [Optional], csSetupTime; [0x00e-0x00e] CS setup time, default value: 3
value: '0x00' # [Required], csSetupTime; [0x00e-0x00e] CS setup time, default value: 3
columnAddressWidth: # [Optional], columnAddressWidth; [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For Serial NAND, need to refer to datasheet
value: '0x00' # [Required], columnAddressWidth; [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For Serial NAND, need to refer to datasheet
deviceModeCfgEnable: # [Optional], deviceModeCfgEnable; [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable
value: '0x00' # [Required], deviceModeCfgEnable; [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable
deviceModeType: # [Optional], deviceModeType; [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, Generic configuration, etc.
value: '0x00' # [Required], deviceModeType; [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, Generic configuration, etc.
waitTimeCfgCommands: # [Optional], waitTimeCfgCommands; [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for DPI/QPI/OPI switch or reset command
value: '0x0000' # [Required], waitTimeCfgCommands; [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for DPI/QPI/OPI switch or reset command
deviceModeSeq: # [Optional], deviceModeSeq; [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt sequence number, [31:16] Reserved
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
deviceModeArg: # [Optional], deviceModeArg; [0x018-0x01b] Argument/Parameter for device configuration
value: '0x00000000' # [Required], deviceModeArg; [0x018-0x01b] Argument/Parameter for device configuration
configCmdEnable: # [Optional], configCmdEnable; [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable
value: '0x00' # [Required], configCmdEnable; [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable
configModeType_0: # [Optional], configModeType_0; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
value: '0x00' # [Required], configModeType_0; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
configModeType_1: # [Optional], configModeType_1; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
value: '0x00' # [Required], configModeType_1; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
configModeType_2: # [Optional], configModeType_2; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
value: '0x00' # [Required], configModeType_2; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
configCmdSeqs_0: # [Optional], configCmdSeqs_0; [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
configCmdSeqs_1: # [Optional], configCmdSeqs_1; [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
configCmdSeqs_2: # [Optional], configCmdSeqs_2; [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
reserved1: # [Optional], reserved1; [0x02c-0x02f] Reserved for future use
value: '0x00000000' # [Required], reserved1; [0x02c-0x02f] Reserved for future use
configCmdArgs_0: # [Optional], configCmdArgs_0; [0x030-0x03b] Arguments/Parameters for device Configuration commands
value: '0x00000000' # [Required], configCmdArgs_0; [0x030-0x03b] Arguments/Parameters for device Configuration commands
configCmdArgs_1: # [Optional], configCmdArgs_1; [0x030-0x03b] Arguments/Parameters for device Configuration commands
value: '0x00000000' # [Required], configCmdArgs_1; [0x030-0x03b] Arguments/Parameters for device Configuration commands
configCmdArgs_2: # [Optional], configCmdArgs_2; [0x030-0x03b] Arguments/Parameters for device Configuration commands
value: '0x00000000' # [Required], configCmdArgs_2; [0x030-0x03b] Arguments/Parameters for device Configuration commands
reserved2: # [Optional], reserved2; [0x03c-0x03f] Reserved for future use
value: '0x00000000' # [Required], reserved2; [0x03c-0x03f] Reserved for future use
controllerMiscOption: # [Optional], controllerMiscOption; [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more details
value: '0x00000000' # [Required], controllerMiscOption; [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more details
deviceType: # [Optional], deviceType; [0x044-0x044] Device Type: See Flash Type Definition for more details
value: '0x00' # [Required], deviceType; [0x044-0x044] Device Type: See Flash Type Definition for more details
sflashPadType: # [Optional], sflashPadType; [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
value: '0x00' # [Required], sflashPadType; [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
serialClkFreq: # [Optional], serialClkFreq; [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot Chapter for more details
value: '0x00' # [Required], serialClkFreq; [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot Chapter for more details
lutCustomSeqEnable: # [Optional], lutCustomSeqEnable; [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot be done using 1 LUT sequence, currently, only applicable to HyperFLASH
value: '0x00' # [Required], lutCustomSeqEnable; [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot be done using 1 LUT sequence, currently, only applicable to HyperFLASH
reserved3_0: # [Optional], reserved3_0; [0x048-0x04f] Reserved for future use
value: '0x00000000' # [Required], reserved3_0; [0x048-0x04f] Reserved for future use
reserved3_1: # [Optional], reserved3_1; [0x048-0x04f] Reserved for future use
value: '0x00000000' # [Required], reserved3_1; [0x048-0x04f] Reserved for future use
sflashA1Size: # [Optional], sflashA1Size; [0x050-0x053] Size of Flash connected to A1
value: '0x00000000' # [Required], sflashA1Size; [0x050-0x053] Size of Flash connected to A1
sflashA2Size: # [Optional], sflashA2Size; [0x054-0x057] Size of Flash connected to A2
value: '0x00000000' # [Required], sflashA2Size; [0x054-0x057] Size of Flash connected to A2
sflashB1Size: # [Optional], sflashB1Size; [0x058-0x05b] Size of Flash connected to B1
value: '0x00000000' # [Required], sflashB1Size; [0x058-0x05b] Size of Flash connected to B1
sflashB2Size: # [Optional], sflashB2Size; [0x05c-0x05f] Size of Flash connected to B2
value: '0x00000000' # [Required], sflashB2Size; [0x05c-0x05f] Size of Flash connected to B2
csPadSettingOverride: # [Optional], csPadSettingOverride; [0x060-0x063] CS pad setting override value
value: '0x00000000' # [Required], csPadSettingOverride; [0x060-0x063] CS pad setting override value
sclkPadSettingOverride: # [Optional], sclkPadSettingOverride; [0x064-0x067] SCK pad setting override value
value: '0x00000000' # [Required], sclkPadSettingOverride; [0x064-0x067] SCK pad setting override value
dataPadSettingOverride: # [Optional], dataPadSettingOverride; [0x068-0x06b] data pad setting override value
value: '0x00000000' # [Required], dataPadSettingOverride; [0x068-0x06b] data pad setting override value
dqsPadSettingOverride: # [Optional], dqsPadSettingOverride; [0x06c-0x06f] DQS pad setting override value
value: '0x00000000' # [Required], dqsPadSettingOverride; [0x06c-0x06f] DQS pad setting override value
timeoutInMs: # [Optional], timeoutInMs; [0x070-0x073] Timeout threshold for read status command
value: '0x00000000' # [Required], timeoutInMs; [0x070-0x073] Timeout threshold for read status command
commandInterval: # [Optional], commandInterval; [0x074-0x077] CS deselect interval between two commands
value: '0x00000000' # [Required], commandInterval; [0x074-0x077] CS deselect interval between two commands
dataValidTime_0: # [Optional], dataValidTime_0; [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B
bitfields: # [Required]
time_100ps: 0 # [Optional], time_100ps; Data valid time, in terms of 100ps
delay_cells: 0 # [Optional], delay_cells; Data valid time, in terms of delay cells
dataValidTime_1: # [Optional], dataValidTime_1; [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B
bitfields: # [Required]
time_100ps: 0 # [Optional], time_100ps; Data valid time, in terms of 100ps
delay_cells: 0 # [Optional], delay_cells; Data valid time, in terms of delay cells
busyOffset: # [Optional], busyOffset; [0x07c-0x07d] Busy offset, valid value: 0-31
value: '0x0000' # [Required], busyOffset; [0x07c-0x07d] Busy offset, valid value: 0-31
busyBitPolarity: # [Optional], busyBitPolarity; [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - busy flag is 0 when flash device is busy
value: '0x0000' # [Required], busyBitPolarity; [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - busy flag is 0 when flash device is busy
lookupTable_0: # [Optional], lookupTable_0; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_0; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_1: # [Optional], lookupTable_1; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_1; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_2: # [Optional], lookupTable_2; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_2; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_3: # [Optional], lookupTable_3; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_3; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_4: # [Optional], lookupTable_4; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_4; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_5: # [Optional], lookupTable_5; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_5; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_6: # [Optional], lookupTable_6; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_6; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_7: # [Optional], lookupTable_7; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_7; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_8: # [Optional], lookupTable_8; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_8; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_9: # [Optional], lookupTable_9; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_9; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_10: # [Optional], lookupTable_10; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_10; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_11: # [Optional], lookupTable_11; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_11; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_12: # [Optional], lookupTable_12; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_12; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_13: # [Optional], lookupTable_13; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_13; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_14: # [Optional], lookupTable_14; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_14; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_15: # [Optional], lookupTable_15; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_15; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_16: # [Optional], lookupTable_16; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_16; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_17: # [Optional], lookupTable_17; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_17; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_18: # [Optional], lookupTable_18; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_18; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_19: # [Optional], lookupTable_19; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_19; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_20: # [Optional], lookupTable_20; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_20; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_21: # [Optional], lookupTable_21; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_21; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_22: # [Optional], lookupTable_22; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_22; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_23: # [Optional], lookupTable_23; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_23; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_24: # [Optional], lookupTable_24; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_24; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_25: # [Optional], lookupTable_25; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_25; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_26: # [Optional], lookupTable_26; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_26; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_27: # [Optional], lookupTable_27; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_27; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_28: # [Optional], lookupTable_28; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_28; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_29: # [Optional], lookupTable_29; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_29; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_30: # [Optional], lookupTable_30; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_30; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_31: # [Optional], lookupTable_31; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_31; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_32: # [Optional], lookupTable_32; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_32; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_33: # [Optional], lookupTable_33; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_33; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_34: # [Optional], lookupTable_34; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_34; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_35: # [Optional], lookupTable_35; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_35; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_36: # [Optional], lookupTable_36; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_36; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_37: # [Optional], lookupTable_37; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_37; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_38: # [Optional], lookupTable_38; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_38; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_39: # [Optional], lookupTable_39; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_39; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_40: # [Optional], lookupTable_40; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_40; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_41: # [Optional], lookupTable_41; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_41; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_42: # [Optional], lookupTable_42; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_42; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_43: # [Optional], lookupTable_43; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_43; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_44: # [Optional], lookupTable_44; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_44; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_45: # [Optional], lookupTable_45; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_45; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_46: # [Optional], lookupTable_46; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_46; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_47: # [Optional], lookupTable_47; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_47; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_48: # [Optional], lookupTable_48; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_48; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_49: # [Optional], lookupTable_49; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_49; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_50: # [Optional], lookupTable_50; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_50; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_51: # [Optional], lookupTable_51; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_51; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_52: # [Optional], lookupTable_52; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_52; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_53: # [Optional], lookupTable_53; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_53; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_54: # [Optional], lookupTable_54; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_54; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_55: # [Optional], lookupTable_55; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_55; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_56: # [Optional], lookupTable_56; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_56; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_57: # [Optional], lookupTable_57; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_57; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_58: # [Optional], lookupTable_58; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_58; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_59: # [Optional], lookupTable_59; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_59; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_60: # [Optional], lookupTable_60; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_60; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_61: # [Optional], lookupTable_61; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_61; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_62: # [Optional], lookupTable_62; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_62; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_63: # [Optional], lookupTable_63; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_63; [0x080-0x17f] Lookup table holds Flash command sequences
lutCustomSeq_0: # [Optional], lutCustomSeq_0; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_1: # [Optional], lutCustomSeq_1; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_2: # [Optional], lutCustomSeq_2; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_3: # [Optional], lutCustomSeq_3; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_4: # [Optional], lutCustomSeq_4; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_5: # [Optional], lutCustomSeq_5; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_6: # [Optional], lutCustomSeq_6; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_7: # [Optional], lutCustomSeq_7; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_8: # [Optional], lutCustomSeq_8; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_9: # [Optional], lutCustomSeq_9; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_10: # [Optional], lutCustomSeq_10; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_11: # [Optional], lutCustomSeq_11; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
reserved4_0: # [Optional], reserved4_0; [0x1b0-0x1bf] Reserved for future use
value: '0x00000000' # [Required], reserved4_0; [0x1b0-0x1bf] Reserved for future use
reserved4_1: # [Optional], reserved4_1; [0x1b0-0x1bf] Reserved for future use
value: '0x00000000' # [Required], reserved4_1; [0x1b0-0x1bf] Reserved for future use
reserved4_2: # [Optional], reserved4_2; [0x1b0-0x1bf] Reserved for future use
value: '0x00000000' # [Required], reserved4_2; [0x1b0-0x1bf] Reserved for future use
reserved4_3: # [Optional], reserved4_3; [0x1b0-0x1bf] Reserved for future use
value: '0x00000000' # [Required], reserved4_3; [0x1b0-0x1bf] Reserved for future use
pageSize: # [Optional], pageSize; Page size of Serial NOR
value: '0x00000000' # [Required], pageSize; Page size of Serial NOR
sectorSize: # [Optional], sectorSize; Sector size of Serial NOR
value: '0x00000000' # [Required], sectorSize; Sector size of Serial NOR
ipcmdSerialClkFreq: # [Optional], ipcmdSerialClkFreq; Clock frequency for IP command
value: '0x00' # [Required], ipcmdSerialClkFreq; Clock frequency for IP command
isUniformBlockSize: # [Optional], isUniformBlockSize; Sector/Block size is the same
value: '0x00' # [Required], isUniformBlockSize; Sector/Block size is the same
isDataOrderSwapped: # [Optional], isDataOrderSwapped; Data order (D0, D1, D2, D3) is swapped (D1,D0, D3, D2)
value: '0x00' # [Required], isDataOrderSwapped; Data order (D0, D1, D2, D3) is swapped (D1,D0, D3, D2)
reserved0_0: # [Optional], reserved0_0; Reserved for future use
value: '0x00' # [Required], reserved0_0; Reserved for future use
serialNorType: # [Optional], serialNorType; Serial NOR Flash type: 0/1/2/3
value: '0x00' # [Required], serialNorType; Serial NOR Flash type: 0/1/2/3
needExitNoCmdMode: # [Optional], needExitNoCmdMode; Need to exit NoCmd mode before other IP command
value: '0x00' # [Required], needExitNoCmdMode; Need to exit NoCmd mode before other IP command
halfClkForNonReadCmd: # [Optional], halfClkForNonReadCmd; Half the Serial Clock for non-read command: true/false
value: '0x00' # [Required], halfClkForNonReadCmd; Half the Serial Clock for non-read command: true/false
needRestoreNoCmdMode: # [Optional], needRestoreNoCmdMode; Need to Restore NoCmd mode after IP commmand execution
value: '0x00' # [Required], needRestoreNoCmdMode; Need to Restore NoCmd mode after IP commmand execution
blockSize: # [Optional], blockSize; Block size
value: '0x00000000' # [Required], blockSize; Block size
flashStateCtx: # [Optional], flashStateCtx; Flash State Context
value: '0x00000000' # [Required], flashStateCtx; Flash State Context
reserve2_0: # [Optional], reserve2_0; Reserved for future use
value: '0x00000000' # [Required], reserve2_0; Reserved for future use
reserve2_1: # [Optional], reserve2_1; Reserved for future use
value: '0x00000000' # [Required], reserve2_1; Reserved for future use
reserve2_2: # [Optional], reserve2_2; Reserved for future use
value: '0x00000000' # [Required], reserve2_2; Reserved for future use
reserve2_3: # [Optional], reserve2_3; Reserved for future use
value: '0x00000000' # [Required], reserve2_3; Reserved for future use
reserve2_4: # [Optional], reserve2_4; Reserved for future use
value: '0x00000000' # [Required], reserve2_4; Reserved for future use
reserve2_5: # [Optional], reserve2_5; Reserved for future use
value: '0x00000000' # [Required], reserve2_5; Reserved for future use
reserve2_6: # [Optional], reserve2_6; Reserved for future use
value: '0x00000000' # [Required], reserve2_6; Reserved for future use
reserve2_7: # [Optional], reserve2_7; Reserved for future use
value: '0x00000000' # [Required], reserve2_7; Reserved for future use
reserve2_8: # [Optional], reserve2_8; Reserved for future use
value: '0x00000000' # [Required], reserve2_8; Reserved for future use
reserve2_9: # [Optional], reserve2_9; Reserved for future use
value: '0x00000000' # [Required], reserve2_9; Reserved for future use
FCB template for rt6xx and flexspi_nor
family(string): MCU family name. Must be one of:["lpc55s3x", "rt101x", "rt102x", "rt104x", "rt105x", "rt106x", "rt116x", "rt117x", "rt118x", "rt5xx", "rt6xx", "rw61x"].revision(string): If needed this could be used to specify silicon revision of device. Must be one of:["latest"].type(string): Specify type of memory used by FCB description. Must be one of:["flexspi_nor"].fcb_settings(object)tag(object): [0x000-0x003] Tag, fixed value 0x42464346UL .value([‘string’, ‘number’], required): [0x000-0x003] Tag, fixed value 0x42464346UL .
version(object): [0x004-0x007] Version,[31:24] -‘V’, [23:16] - Major, [15:8] - Minor, [7:0] - bugfix .value([‘string’, ‘number’], required): [0x004-0x007] Version,[31:24] -‘V’, [23:16] - Major, [15:8] - Minor, [7:0] - bugfix .
reserved0(object): [0x008-0x00b] Reserved for future use .value([‘string’, ‘number’], required): [0x008-0x00b] Reserved for future use .
readSampleClkSrc(object): [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3 .value([‘string’, ‘number’], required): [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3 .
csHoldTime(object): [0x00d-0x00d] CS hold time, default value: 3 .value([‘string’, ‘number’], required): [0x00d-0x00d] CS hold time, default value: 3 .
csSetupTime(object): [0x00e-0x00e] CS setup time, default value: 3 .value([‘string’, ‘number’], required): [0x00e-0x00e] CS setup time, default value: 3 .
columnAddressWidth(object): [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For Serial NAND, need to refer to datasheet .value([‘string’, ‘number’], required): [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For Serial NAND, need to refer to datasheet .
deviceModeCfgEnable(object): [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable .value([‘string’, ‘number’], required): [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable .
deviceModeType(object): [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, Generic configuration, etc. .value([‘string’, ‘number’], required): [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, Generic configuration, etc. .
waitTimeCfgCommands(object): [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for DPI/QPI/OPI switch or reset command .value([‘string’, ‘number’], required): [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for DPI/QPI/OPI switch or reset command .
deviceModeSeq(object): [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt sequence number, [31:16] Reserved .bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16 .seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15 .reserved([‘string’, ‘number’]): N/A.
deviceModeArg(object): [0x018-0x01b] Argument/Parameter for device configuration .value([‘string’, ‘number’], required): [0x018-0x01b] Argument/Parameter for device configuration .
configCmdEnable(object): [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable .value([‘string’, ‘number’], required): [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable .
configModeType_0(object): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe .value([‘string’, ‘number’], required): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe .
configModeType_1(object): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe .value([‘string’, ‘number’], required): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe .
configModeType_2(object): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe .value([‘string’, ‘number’], required): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe .
configCmdSeqs_0(object): [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq .bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16 .seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15 .reserved([‘string’, ‘number’]): N/A.
configCmdSeqs_1(object): [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq .bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16 .seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15 .reserved([‘string’, ‘number’]): N/A.
configCmdSeqs_2(object): [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq .bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16 .seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15 .reserved([‘string’, ‘number’]): N/A.
reserved1(object): [0x02c-0x02f] Reserved for future use .value([‘string’, ‘number’], required): [0x02c-0x02f] Reserved for future use .
configCmdArgs_0(object): [0x030-0x03b] Arguments/Parameters for device Configuration commands .value([‘string’, ‘number’], required): [0x030-0x03b] Arguments/Parameters for device Configuration commands .
configCmdArgs_1(object): [0x030-0x03b] Arguments/Parameters for device Configuration commands .value([‘string’, ‘number’], required): [0x030-0x03b] Arguments/Parameters for device Configuration commands .
configCmdArgs_2(object): [0x030-0x03b] Arguments/Parameters for device Configuration commands .value([‘string’, ‘number’], required): [0x030-0x03b] Arguments/Parameters for device Configuration commands .
reserved2(object): [0x03c-0x03f] Reserved for future use .value([‘string’, ‘number’], required): [0x03c-0x03f] Reserved for future use .
controllerMiscOption(object): [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more details .value([‘string’, ‘number’], required): [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more details .
deviceType(object): [0x044-0x044] Device Type: See Flash Type Definition for more details .value([‘string’, ‘number’], required): [0x044-0x044] Device Type: See Flash Type Definition for more details .
sflashPadType(object): [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal .value([‘string’, ‘number’], required): [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal .
serialClkFreq(object): [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot Chapter for more details .value([‘string’, ‘number’], required): [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot Chapter for more details .
lutCustomSeqEnable(object): [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot be done using 1 LUT sequence, currently, only applicable to HyperFLASH .value([‘string’, ‘number’], required): [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot be done using 1 LUT sequence, currently, only applicable to HyperFLASH .
reserved3_0(object): [0x048-0x04f] Reserved for future use .value([‘string’, ‘number’], required): [0x048-0x04f] Reserved for future use .
reserved3_1(object): [0x048-0x04f] Reserved for future use .value([‘string’, ‘number’], required): [0x048-0x04f] Reserved for future use .
sflashA1Size(object): [0x050-0x053] Size of Flash connected to A1 .value([‘string’, ‘number’], required): [0x050-0x053] Size of Flash connected to A1 .
sflashA2Size(object): [0x054-0x057] Size of Flash connected to A2 .value([‘string’, ‘number’], required): [0x054-0x057] Size of Flash connected to A2 .
sflashB1Size(object): [0x058-0x05b] Size of Flash connected to B1 .value([‘string’, ‘number’], required): [0x058-0x05b] Size of Flash connected to B1 .
sflashB2Size(object): [0x05c-0x05f] Size of Flash connected to B2 .value([‘string’, ‘number’], required): [0x05c-0x05f] Size of Flash connected to B2 .
csPadSettingOverride(object): [0x060-0x063] CS pad setting override value .value([‘string’, ‘number’], required): [0x060-0x063] CS pad setting override value .
sclkPadSettingOverride(object): [0x064-0x067] SCK pad setting override value .value([‘string’, ‘number’], required): [0x064-0x067] SCK pad setting override value .
dataPadSettingOverride(object): [0x068-0x06b] data pad setting override value .value([‘string’, ‘number’], required): [0x068-0x06b] data pad setting override value .
dqsPadSettingOverride(object): [0x06c-0x06f] DQS pad setting override value .value([‘string’, ‘number’], required): [0x06c-0x06f] DQS pad setting override value .
timeoutInMs(object): [0x070-0x073] Timeout threshold for read status command .value([‘string’, ‘number’], required): [0x070-0x073] Timeout threshold for read status command .
commandInterval(object): [0x074-0x077] CS deselect interval between two commands .value([‘string’, ‘number’], required): [0x074-0x077] CS deselect interval between two commands .
dataValidTime_0(object): [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B .bitfields(object, required)time_100ps([‘string’, ‘number’]): Data valid time, in terms of 100ps .delay_cells([‘string’, ‘number’]): Data valid time, in terms of delay cells .
dataValidTime_1(object): [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B .bitfields(object, required)time_100ps([‘string’, ‘number’]): Data valid time, in terms of 100ps .delay_cells([‘string’, ‘number’]): Data valid time, in terms of delay cells .
busyOffset(object): [0x07c-0x07d] Busy offset, valid value: 0-31 .value([‘string’, ‘number’], required): [0x07c-0x07d] Busy offset, valid value: 0-31 .
busyBitPolarity(object): [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - busy flag is 0 when flash device is busy .value([‘string’, ‘number’], required): [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - busy flag is 0 when flash device is busy .
lookupTable_0(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_1(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_2(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_3(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_4(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_5(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_6(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_7(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_8(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_9(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_10(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_11(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_12(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_13(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_14(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_15(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_16(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_17(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_18(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_19(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_20(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_21(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_22(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_23(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_24(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_25(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_26(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_27(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_28(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_29(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_30(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_31(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_32(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_33(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_34(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_35(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_36(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_37(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_38(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_39(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_40(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_41(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_42(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_43(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_44(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_45(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_46(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_47(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_48(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_49(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_50(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_51(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_52(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_53(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_54(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_55(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_56(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_57(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_58(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_59(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_60(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_61(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_62(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_63(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lutCustomSeq_0(object): [0x180-0x1af] Customizable LUT Sequences .bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16 .seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15 .reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_1(object): [0x180-0x1af] Customizable LUT Sequences .bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16 .seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15 .reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_2(object): [0x180-0x1af] Customizable LUT Sequences .bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16 .seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15 .reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_3(object): [0x180-0x1af] Customizable LUT Sequences .bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16 .seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15 .reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_4(object): [0x180-0x1af] Customizable LUT Sequences .bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16 .seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15 .reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_5(object): [0x180-0x1af] Customizable LUT Sequences .bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16 .seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15 .reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_6(object): [0x180-0x1af] Customizable LUT Sequences .bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16 .seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15 .reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_7(object): [0x180-0x1af] Customizable LUT Sequences .bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16 .seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15 .reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_8(object): [0x180-0x1af] Customizable LUT Sequences .bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16 .seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15 .reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_9(object): [0x180-0x1af] Customizable LUT Sequences .bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16 .seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15 .reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_10(object): [0x180-0x1af] Customizable LUT Sequences .bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16 .seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15 .reserved([‘string’, ‘number’]): N/A.
lutCustomSeq_11(object): [0x180-0x1af] Customizable LUT Sequences .bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16 .seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15 .reserved([‘string’, ‘number’]): N/A.
reserved4_0(object): [0x1b0-0x1bf] Reserved for future use .value([‘string’, ‘number’], required): [0x1b0-0x1bf] Reserved for future use .
reserved4_1(object): [0x1b0-0x1bf] Reserved for future use .value([‘string’, ‘number’], required): [0x1b0-0x1bf] Reserved for future use .
reserved4_2(object): [0x1b0-0x1bf] Reserved for future use .value([‘string’, ‘number’], required): [0x1b0-0x1bf] Reserved for future use .
reserved4_3(object): [0x1b0-0x1bf] Reserved for future use .value([‘string’, ‘number’], required): [0x1b0-0x1bf] Reserved for future use .
pageSize(object): Page size of Serial NOR .value([‘string’, ‘number’], required): Page size of Serial NOR .
sectorSize(object): Sector size of Serial NOR .value([‘string’, ‘number’], required): Sector size of Serial NOR .
ipcmdSerialClkFreq(object): Clock frequency for IP command .value([‘string’, ‘number’], required): Clock frequency for IP command .
isUniformBlockSize(object): Sector/Block size is the same .value([‘string’, ‘number’], required): Sector/Block size is the same .
isDataOrderSwapped(object): Data order (D0, D1, D2, D3) is swapped (D1,D0, D3, D2) .value([‘string’, ‘number’], required): Data order (D0, D1, D2, D3) is swapped (D1,D0, D3, D2) .
reserved0_0(object): Reserved for future use .value([‘string’, ‘number’], required): Reserved for future use .
serialNorType(object): Serial NOR Flash type: 0/1/2/3 .value([‘string’, ‘number’], required): Serial NOR Flash type: 0/1/2/3 .
needExitNoCmdMode(object): Need to exit NoCmd mode before other IP command .value([‘string’, ‘number’], required): Need to exit NoCmd mode before other IP command .
halfClkForNonReadCmd(object): Half the Serial Clock for non-read command: true/false .value([‘string’, ‘number’], required): Half the Serial Clock for non-read command: true/false .
needRestoreNoCmdMode(object): Need to Restore NoCmd mode after IP commmand execution .value([‘string’, ‘number’], required): Need to Restore NoCmd mode after IP commmand execution .
blockSize(object): Block size .value([‘string’, ‘number’], required): Block size .
flashStateCtx(object): Flash State Context .value([‘string’, ‘number’], required): Flash State Context .
reserve2_0(object): Reserved for future use .value([‘string’, ‘number’], required): Reserved for future use .
reserve2_1(object): Reserved for future use .value([‘string’, ‘number’], required): Reserved for future use .
reserve2_2(object): Reserved for future use .value([‘string’, ‘number’], required): Reserved for future use .
reserve2_3(object): Reserved for future use .value([‘string’, ‘number’], required): Reserved for future use .
reserve2_4(object): Reserved for future use .value([‘string’, ‘number’], required): Reserved for future use .
reserve2_5(object): Reserved for future use .value([‘string’, ‘number’], required): Reserved for future use .
reserve2_6(object): Reserved for future use .value([‘string’, ‘number’], required): Reserved for future use .
reserve2_7(object): Reserved for future use .value([‘string’, ‘number’], required): Reserved for future use .
reserve2_8(object): Reserved for future use .value([‘string’, ‘number’], required): Reserved for future use .
reserve2_9(object): Reserved for future use .value([‘string’, ‘number’], required): Reserved for future use .
# =========== FCB template for rt6xx and flexspi_nor ===========
# ----------------------------------------------------------------------------------------------------
# == FCB template for rt6xx and flexspi_nor ==
# ----------------------------------------------------------------------------------------------------
family: CHOOSE_FROM_TABLE # [Required], MCU family name; Possible options:['lpc55s3x', 'rt101x', 'rt102x', 'rt104x', 'rt105x', 'rt106x', 'rt116x', 'rt117x', 'rt118x', 'rt5xx', 'rt6xx', 'rw61x']
revision: a1 # [Optional], Chip silicon revision; If needed this could be used to specify silicon revision of device; Possible options:['latest']
type: flexspi_nor # [Required], Memory type; Specify type of memory used by FCB description; Possible options:['flexspi_nor']
fcb_settings: # [Required], rt6xx
tag: # [Optional], tag; [0x000-0x003] Tag, fixed value 0x42464346UL
value: '0x00000000' # [Required], tag; [0x000-0x003] Tag, fixed value 0x42464346UL
version: # [Optional], version; [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix
value: '0x00000000' # [Required], version; [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix
reserved0: # [Optional], reserved0; [0x008-0x00b] Reserved for future use
value: '0x00000000' # [Required], reserved0; [0x008-0x00b] Reserved for future use
readSampleClkSrc: # [Optional], readSampleClkSrc; [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3
value: '0x00' # [Required], readSampleClkSrc; [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3
csHoldTime: # [Optional], csHoldTime; [0x00d-0x00d] CS hold time, default value: 3
value: '0x00' # [Required], csHoldTime; [0x00d-0x00d] CS hold time, default value: 3
csSetupTime: # [Optional], csSetupTime; [0x00e-0x00e] CS setup time, default value: 3
value: '0x00' # [Required], csSetupTime; [0x00e-0x00e] CS setup time, default value: 3
columnAddressWidth: # [Optional], columnAddressWidth; [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For Serial NAND, need to refer to datasheet
value: '0x00' # [Required], columnAddressWidth; [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For Serial NAND, need to refer to datasheet
deviceModeCfgEnable: # [Optional], deviceModeCfgEnable; [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable
value: '0x00' # [Required], deviceModeCfgEnable; [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable
deviceModeType: # [Optional], deviceModeType; [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, Generic configuration, etc.
value: '0x00' # [Required], deviceModeType; [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, Generic configuration, etc.
waitTimeCfgCommands: # [Optional], waitTimeCfgCommands; [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for DPI/QPI/OPI switch or reset command
value: '0x0000' # [Required], waitTimeCfgCommands; [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for DPI/QPI/OPI switch or reset command
deviceModeSeq: # [Optional], deviceModeSeq; [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt sequence number, [31:16] Reserved
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
deviceModeArg: # [Optional], deviceModeArg; [0x018-0x01b] Argument/Parameter for device configuration
value: '0x00000000' # [Required], deviceModeArg; [0x018-0x01b] Argument/Parameter for device configuration
configCmdEnable: # [Optional], configCmdEnable; [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable
value: '0x00' # [Required], configCmdEnable; [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable
configModeType_0: # [Optional], configModeType_0; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
value: '0x00' # [Required], configModeType_0; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
configModeType_1: # [Optional], configModeType_1; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
value: '0x00' # [Required], configModeType_1; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
configModeType_2: # [Optional], configModeType_2; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
value: '0x00' # [Required], configModeType_2; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
configCmdSeqs_0: # [Optional], configCmdSeqs_0; [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
configCmdSeqs_1: # [Optional], configCmdSeqs_1; [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
configCmdSeqs_2: # [Optional], configCmdSeqs_2; [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
reserved1: # [Optional], reserved1; [0x02c-0x02f] Reserved for future use
value: '0x00000000' # [Required], reserved1; [0x02c-0x02f] Reserved for future use
configCmdArgs_0: # [Optional], configCmdArgs_0; [0x030-0x03b] Arguments/Parameters for device Configuration commands
value: '0x00000000' # [Required], configCmdArgs_0; [0x030-0x03b] Arguments/Parameters for device Configuration commands
configCmdArgs_1: # [Optional], configCmdArgs_1; [0x030-0x03b] Arguments/Parameters for device Configuration commands
value: '0x00000000' # [Required], configCmdArgs_1; [0x030-0x03b] Arguments/Parameters for device Configuration commands
configCmdArgs_2: # [Optional], configCmdArgs_2; [0x030-0x03b] Arguments/Parameters for device Configuration commands
value: '0x00000000' # [Required], configCmdArgs_2; [0x030-0x03b] Arguments/Parameters for device Configuration commands
reserved2: # [Optional], reserved2; [0x03c-0x03f] Reserved for future use
value: '0x00000000' # [Required], reserved2; [0x03c-0x03f] Reserved for future use
controllerMiscOption: # [Optional], controllerMiscOption; [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more details
value: '0x00000000' # [Required], controllerMiscOption; [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more details
deviceType: # [Optional], deviceType; [0x044-0x044] Device Type: See Flash Type Definition for more details
value: '0x00' # [Required], deviceType; [0x044-0x044] Device Type: See Flash Type Definition for more details
sflashPadType: # [Optional], sflashPadType; [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
value: '0x00' # [Required], sflashPadType; [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
serialClkFreq: # [Optional], serialClkFreq; [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot Chapter for more details
value: '0x00' # [Required], serialClkFreq; [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot Chapter for more details
lutCustomSeqEnable: # [Optional], lutCustomSeqEnable; [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot be done using 1 LUT sequence, currently, only applicable to HyperFLASH
value: '0x00' # [Required], lutCustomSeqEnable; [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot be done using 1 LUT sequence, currently, only applicable to HyperFLASH
reserved3_0: # [Optional], reserved3_0; [0x048-0x04f] Reserved for future use
value: '0x00000000' # [Required], reserved3_0; [0x048-0x04f] Reserved for future use
reserved3_1: # [Optional], reserved3_1; [0x048-0x04f] Reserved for future use
value: '0x00000000' # [Required], reserved3_1; [0x048-0x04f] Reserved for future use
sflashA1Size: # [Optional], sflashA1Size; [0x050-0x053] Size of Flash connected to A1
value: '0x00000000' # [Required], sflashA1Size; [0x050-0x053] Size of Flash connected to A1
sflashA2Size: # [Optional], sflashA2Size; [0x054-0x057] Size of Flash connected to A2
value: '0x00000000' # [Required], sflashA2Size; [0x054-0x057] Size of Flash connected to A2
sflashB1Size: # [Optional], sflashB1Size; [0x058-0x05b] Size of Flash connected to B1
value: '0x00000000' # [Required], sflashB1Size; [0x058-0x05b] Size of Flash connected to B1
sflashB2Size: # [Optional], sflashB2Size; [0x05c-0x05f] Size of Flash connected to B2
value: '0x00000000' # [Required], sflashB2Size; [0x05c-0x05f] Size of Flash connected to B2
csPadSettingOverride: # [Optional], csPadSettingOverride; [0x060-0x063] CS pad setting override value
value: '0x00000000' # [Required], csPadSettingOverride; [0x060-0x063] CS pad setting override value
sclkPadSettingOverride: # [Optional], sclkPadSettingOverride; [0x064-0x067] SCK pad setting override value
value: '0x00000000' # [Required], sclkPadSettingOverride; [0x064-0x067] SCK pad setting override value
dataPadSettingOverride: # [Optional], dataPadSettingOverride; [0x068-0x06b] data pad setting override value
value: '0x00000000' # [Required], dataPadSettingOverride; [0x068-0x06b] data pad setting override value
dqsPadSettingOverride: # [Optional], dqsPadSettingOverride; [0x06c-0x06f] DQS pad setting override value
value: '0x00000000' # [Required], dqsPadSettingOverride; [0x06c-0x06f] DQS pad setting override value
timeoutInMs: # [Optional], timeoutInMs; [0x070-0x073] Timeout threshold for read status command
value: '0x00000000' # [Required], timeoutInMs; [0x070-0x073] Timeout threshold for read status command
commandInterval: # [Optional], commandInterval; [0x074-0x077] CS deselect interval between two commands
value: '0x00000000' # [Required], commandInterval; [0x074-0x077] CS deselect interval between two commands
dataValidTime_0: # [Optional], dataValidTime_0; [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B
bitfields: # [Required]
time_100ps: 0 # [Optional], time_100ps; Data valid time, in terms of 100ps
delay_cells: 0 # [Optional], delay_cells; Data valid time, in terms of delay cells
dataValidTime_1: # [Optional], dataValidTime_1; [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B
bitfields: # [Required]
time_100ps: 0 # [Optional], time_100ps; Data valid time, in terms of 100ps
delay_cells: 0 # [Optional], delay_cells; Data valid time, in terms of delay cells
busyOffset: # [Optional], busyOffset; [0x07c-0x07d] Busy offset, valid value: 0-31
value: '0x0000' # [Required], busyOffset; [0x07c-0x07d] Busy offset, valid value: 0-31
busyBitPolarity: # [Optional], busyBitPolarity; [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - busy flag is 0 when flash device is busy
value: '0x0000' # [Required], busyBitPolarity; [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - busy flag is 0 when flash device is busy
lookupTable_0: # [Optional], lookupTable_0; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_0; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_1: # [Optional], lookupTable_1; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_1; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_2: # [Optional], lookupTable_2; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_2; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_3: # [Optional], lookupTable_3; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_3; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_4: # [Optional], lookupTable_4; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_4; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_5: # [Optional], lookupTable_5; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_5; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_6: # [Optional], lookupTable_6; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_6; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_7: # [Optional], lookupTable_7; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_7; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_8: # [Optional], lookupTable_8; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_8; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_9: # [Optional], lookupTable_9; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_9; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_10: # [Optional], lookupTable_10; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_10; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_11: # [Optional], lookupTable_11; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_11; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_12: # [Optional], lookupTable_12; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_12; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_13: # [Optional], lookupTable_13; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_13; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_14: # [Optional], lookupTable_14; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_14; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_15: # [Optional], lookupTable_15; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_15; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_16: # [Optional], lookupTable_16; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_16; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_17: # [Optional], lookupTable_17; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_17; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_18: # [Optional], lookupTable_18; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_18; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_19: # [Optional], lookupTable_19; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_19; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_20: # [Optional], lookupTable_20; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_20; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_21: # [Optional], lookupTable_21; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_21; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_22: # [Optional], lookupTable_22; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_22; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_23: # [Optional], lookupTable_23; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_23; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_24: # [Optional], lookupTable_24; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_24; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_25: # [Optional], lookupTable_25; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_25; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_26: # [Optional], lookupTable_26; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_26; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_27: # [Optional], lookupTable_27; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_27; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_28: # [Optional], lookupTable_28; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_28; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_29: # [Optional], lookupTable_29; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_29; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_30: # [Optional], lookupTable_30; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_30; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_31: # [Optional], lookupTable_31; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_31; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_32: # [Optional], lookupTable_32; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_32; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_33: # [Optional], lookupTable_33; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_33; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_34: # [Optional], lookupTable_34; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_34; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_35: # [Optional], lookupTable_35; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_35; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_36: # [Optional], lookupTable_36; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_36; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_37: # [Optional], lookupTable_37; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_37; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_38: # [Optional], lookupTable_38; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_38; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_39: # [Optional], lookupTable_39; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_39; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_40: # [Optional], lookupTable_40; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_40; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_41: # [Optional], lookupTable_41; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_41; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_42: # [Optional], lookupTable_42; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_42; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_43: # [Optional], lookupTable_43; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_43; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_44: # [Optional], lookupTable_44; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_44; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_45: # [Optional], lookupTable_45; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_45; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_46: # [Optional], lookupTable_46; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_46; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_47: # [Optional], lookupTable_47; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_47; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_48: # [Optional], lookupTable_48; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_48; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_49: # [Optional], lookupTable_49; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_49; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_50: # [Optional], lookupTable_50; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_50; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_51: # [Optional], lookupTable_51; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_51; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_52: # [Optional], lookupTable_52; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_52; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_53: # [Optional], lookupTable_53; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_53; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_54: # [Optional], lookupTable_54; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_54; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_55: # [Optional], lookupTable_55; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_55; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_56: # [Optional], lookupTable_56; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_56; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_57: # [Optional], lookupTable_57; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_57; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_58: # [Optional], lookupTable_58; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_58; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_59: # [Optional], lookupTable_59; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_59; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_60: # [Optional], lookupTable_60; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_60; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_61: # [Optional], lookupTable_61; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_61; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_62: # [Optional], lookupTable_62; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_62; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_63: # [Optional], lookupTable_63; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_63; [0x080-0x17f] Lookup table holds Flash command sequences
lutCustomSeq_0: # [Optional], lutCustomSeq_0; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_1: # [Optional], lutCustomSeq_1; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_2: # [Optional], lutCustomSeq_2; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_3: # [Optional], lutCustomSeq_3; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_4: # [Optional], lutCustomSeq_4; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_5: # [Optional], lutCustomSeq_5; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_6: # [Optional], lutCustomSeq_6; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_7: # [Optional], lutCustomSeq_7; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_8: # [Optional], lutCustomSeq_8; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_9: # [Optional], lutCustomSeq_9; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_10: # [Optional], lutCustomSeq_10; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
lutCustomSeq_11: # [Optional], lutCustomSeq_11; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; N/A
reserved4_0: # [Optional], reserved4_0; [0x1b0-0x1bf] Reserved for future use
value: '0x00000000' # [Required], reserved4_0; [0x1b0-0x1bf] Reserved for future use
reserved4_1: # [Optional], reserved4_1; [0x1b0-0x1bf] Reserved for future use
value: '0x00000000' # [Required], reserved4_1; [0x1b0-0x1bf] Reserved for future use
reserved4_2: # [Optional], reserved4_2; [0x1b0-0x1bf] Reserved for future use
value: '0x00000000' # [Required], reserved4_2; [0x1b0-0x1bf] Reserved for future use
reserved4_3: # [Optional], reserved4_3; [0x1b0-0x1bf] Reserved for future use
value: '0x00000000' # [Required], reserved4_3; [0x1b0-0x1bf] Reserved for future use
pageSize: # [Optional], pageSize; Page size of Serial NOR
value: '0x00000000' # [Required], pageSize; Page size of Serial NOR
sectorSize: # [Optional], sectorSize; Sector size of Serial NOR
value: '0x00000000' # [Required], sectorSize; Sector size of Serial NOR
ipcmdSerialClkFreq: # [Optional], ipcmdSerialClkFreq; Clock frequency for IP command
value: '0x00' # [Required], ipcmdSerialClkFreq; Clock frequency for IP command
isUniformBlockSize: # [Optional], isUniformBlockSize; Sector/Block size is the same
value: '0x00' # [Required], isUniformBlockSize; Sector/Block size is the same
isDataOrderSwapped: # [Optional], isDataOrderSwapped; Data order (D0, D1, D2, D3) is swapped (D1,D0, D3, D2)
value: '0x00' # [Required], isDataOrderSwapped; Data order (D0, D1, D2, D3) is swapped (D1,D0, D3, D2)
reserved0_0: # [Optional], reserved0_0; Reserved for future use
value: '0x00' # [Required], reserved0_0; Reserved for future use
serialNorType: # [Optional], serialNorType; Serial NOR Flash type: 0/1/2/3
value: '0x00' # [Required], serialNorType; Serial NOR Flash type: 0/1/2/3
needExitNoCmdMode: # [Optional], needExitNoCmdMode; Need to exit NoCmd mode before other IP command
value: '0x00' # [Required], needExitNoCmdMode; Need to exit NoCmd mode before other IP command
halfClkForNonReadCmd: # [Optional], halfClkForNonReadCmd; Half the Serial Clock for non-read command: true/false
value: '0x00' # [Required], halfClkForNonReadCmd; Half the Serial Clock for non-read command: true/false
needRestoreNoCmdMode: # [Optional], needRestoreNoCmdMode; Need to Restore NoCmd mode after IP commmand execution
value: '0x00' # [Required], needRestoreNoCmdMode; Need to Restore NoCmd mode after IP commmand execution
blockSize: # [Optional], blockSize; Block size
value: '0x00000000' # [Required], blockSize; Block size
flashStateCtx: # [Optional], flashStateCtx; Flash State Context
value: '0x00000000' # [Required], flashStateCtx; Flash State Context
reserve2_0: # [Optional], reserve2_0; Reserved for future use
value: '0x00000000' # [Required], reserve2_0; Reserved for future use
reserve2_1: # [Optional], reserve2_1; Reserved for future use
value: '0x00000000' # [Required], reserve2_1; Reserved for future use
reserve2_2: # [Optional], reserve2_2; Reserved for future use
value: '0x00000000' # [Required], reserve2_2; Reserved for future use
reserve2_3: # [Optional], reserve2_3; Reserved for future use
value: '0x00000000' # [Required], reserve2_3; Reserved for future use
reserve2_4: # [Optional], reserve2_4; Reserved for future use
value: '0x00000000' # [Required], reserve2_4; Reserved for future use
reserve2_5: # [Optional], reserve2_5; Reserved for future use
value: '0x00000000' # [Required], reserve2_5; Reserved for future use
reserve2_6: # [Optional], reserve2_6; Reserved for future use
value: '0x00000000' # [Required], reserve2_6; Reserved for future use
reserve2_7: # [Optional], reserve2_7; Reserved for future use
value: '0x00000000' # [Required], reserve2_7; Reserved for future use
reserve2_8: # [Optional], reserve2_8; Reserved for future use
value: '0x00000000' # [Required], reserve2_8; Reserved for future use
reserve2_9: # [Optional], reserve2_9; Reserved for future use
value: '0x00000000' # [Required], reserve2_9; Reserved for future use
FCB template for rw61x and flexspi_nor
family(string): MCU family name. Must be one of:["lpc55s3x", "rt101x", "rt102x", "rt104x", "rt105x", "rt106x", "rt116x", "rt117x", "rt118x", "rt5xx", "rt6xx", "rw61x"].revision(string): If needed this could be used to specify silicon revision of device. Must be one of:["latest"].type(string): Specify type of memory used by FCB description. Must be one of:["flexspi_nor"].fcb_settings(object)tag(object): [0x000-0x003] Tag, fixed value 0x42464346UL .value([‘string’, ‘number’], required): [0x000-0x003] Tag, fixed value 0x42464346UL .
version(object): [0x004-0x007] Version,[31:24] -‘V’, [23:16] - Major, [15:8] - Minor, [7:0] - bugfix .value([‘string’, ‘number’], required): [0x004-0x007] Version,[31:24] -‘V’, [23:16] - Major, [15:8] - Minor, [7:0] - bugfix .
reserved0(object): [0x008-0x00b] Reserved for future use .value([‘string’, ‘number’], required): [0x008-0x00b] Reserved for future use .
readSampleClkSrc(object): [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3 .value([‘string’, ‘number’], required): [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3 .
csHoldTime(object): [0x00d-0x00d] CS hold time, default value: 3 .value([‘string’, ‘number’], required): [0x00d-0x00d] CS hold time, default value: 3 .
csSetupTime(object): [0x00e-0x00e] CS setup time, default value: 3 .value([‘string’, ‘number’], required): [0x00e-0x00e] CS setup time, default value: 3 .
columnAddressWidth(object): [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For Serial NAND, need to refer to datasheet .value([‘string’, ‘number’], required): [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For Serial NAND, need to refer to datasheet .
deviceModeCfgEnable(object): [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable .value([‘string’, ‘number’], required): [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable .
deviceModeType(object): [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, Generic configuration, etc. .value([‘string’, ‘number’], required): [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, Generic configuration, etc. .
waitTimeCfgCommands(object): [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for DPI/QPI/OPI switch or reset command .value([‘string’, ‘number’], required): [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for DPI/QPI/OPI switch or reset command .
deviceModeSeq(object): [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt sequence number, [31:16] Reserved .bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16 .seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15 .reserved([‘string’, ‘number’]): Reserved .
deviceModeArg(object): [0x018-0x01b] Argument/Parameter for device configuration .value([‘string’, ‘number’], required): [0x018-0x01b] Argument/Parameter for device configuration .
configCmdEnable(object): [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable .value([‘string’, ‘number’], required): [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable .
configModeType_0(object): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe .value([‘string’, ‘number’], required): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe .
configModeType_1(object): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe .value([‘string’, ‘number’], required): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe .
configModeType_2(object): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe .value([‘string’, ‘number’], required): [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe .
configCmdSeqs_0(object): [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq .bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16 .seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15 .reserved([‘string’, ‘number’]): Reserved .
configCmdSeqs_1(object): [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq .bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16 .seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15 .reserved([‘string’, ‘number’]): Reserved .
configCmdSeqs_2(object): [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq .bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16 .seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15 .reserved([‘string’, ‘number’]): Reserved .
reserved1(object): [0x02c-0x02f] Reserved for future use .value([‘string’, ‘number’], required): [0x02c-0x02f] Reserved for future use .
configCmdArgs_0(object): [0x030-0x03b] Arguments/Parameters for device Configuration commands .value([‘string’, ‘number’], required): [0x030-0x03b] Arguments/Parameters for device Configuration commands .
configCmdArgs_1(object): [0x030-0x03b] Arguments/Parameters for device Configuration commands .value([‘string’, ‘number’], required): [0x030-0x03b] Arguments/Parameters for device Configuration commands .
configCmdArgs_2(object): [0x030-0x03b] Arguments/Parameters for device Configuration commands .value([‘string’, ‘number’], required): [0x030-0x03b] Arguments/Parameters for device Configuration commands .
reserved2(object): [0x03c-0x03f] Reserved for future use .value([‘string’, ‘number’], required): [0x03c-0x03f] Reserved for future use .
controllerMiscOption(object): [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more details .value([‘string’, ‘number’], required): [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more details .
deviceType(object): [0x044-0x044] Device Type: See Flash Type Definition for more details .value([‘string’, ‘number’], required): [0x044-0x044] Device Type: See Flash Type Definition for more details .
sflashPadType(object): [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal .value([‘string’, ‘number’], required): [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal .
serialClkFreq(object): [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot Chapter for more details .value([‘string’, ‘number’], required): [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot Chapter for more details .
lutCustomSeqEnable(object): [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot be done using 1 LUT sequence, currently, only applicable to HyperFLASH .value([‘string’, ‘number’], required): [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot be done using 1 LUT sequence, currently, only applicable to HyperFLASH .
reserved3_0(object): [0x048-0x04f] Reserved for future use .value([‘string’, ‘number’], required): [0x048-0x04f] Reserved for future use .
reserved3_1(object): [0x048-0x04f] Reserved for future use .value([‘string’, ‘number’], required): [0x048-0x04f] Reserved for future use .
sflashA1Size(object): [0x050-0x053] Size of Flash connected to A1 .value([‘string’, ‘number’], required): [0x050-0x053] Size of Flash connected to A1 .
sflashA2Size(object): [0x054-0x057] Size of Flash connected to A2 .value([‘string’, ‘number’], required): [0x054-0x057] Size of Flash connected to A2 .
sflashB1Size(object): [0x058-0x05b] Size of Flash connected to B1 .value([‘string’, ‘number’], required): [0x058-0x05b] Size of Flash connected to B1 .
sflashB2Size(object): [0x05c-0x05f] Size of Flash connected to B2 .value([‘string’, ‘number’], required): [0x05c-0x05f] Size of Flash connected to B2 .
csPadSettingOverride(object): [0x060-0x063] CS pad setting override value .value([‘string’, ‘number’], required): [0x060-0x063] CS pad setting override value .
sclkPadSettingOverride(object): [0x064-0x067] SCK pad setting override value .value([‘string’, ‘number’], required): [0x064-0x067] SCK pad setting override value .
dataPadSettingOverride(object): [0x068-0x06b] data pad setting override value .value([‘string’, ‘number’], required): [0x068-0x06b] data pad setting override value .
dqsPadSettingOverride(object): [0x06c-0x06f] DQS pad setting override value .value([‘string’, ‘number’], required): [0x06c-0x06f] DQS pad setting override value .
timeoutInMs(object): [0x070-0x073] Timeout threshold for read status command .value([‘string’, ‘number’], required): [0x070-0x073] Timeout threshold for read status command .
commandInterval(object): [0x074-0x077] CS deselect interval between two commands .value([‘string’, ‘number’], required): [0x074-0x077] CS deselect interval between two commands .
dataValidTime_0(object): [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B .bitfields(object, required)time_100ps([‘string’, ‘number’]): Data valid time, in terms of 100ps .delay_cells([‘string’, ‘number’]): Data valid time, in terms of delay cells .
dataValidTime_1(object): [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B .bitfields(object, required)time_100ps([‘string’, ‘number’]): Data valid time, in terms of 100ps .delay_cells([‘string’, ‘number’]): Data valid time, in terms of delay cells .
busyOffset(object): [0x07c-0x07d] Busy offset, valid value: 0-31 .value([‘string’, ‘number’], required): [0x07c-0x07d] Busy offset, valid value: 0-31 .
busyBitPolarity(object): [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - busy flag is 0 when flash device is busy .value([‘string’, ‘number’], required): [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - busy flag is 0 when flash device is busy .
lookupTable_0(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_1(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_2(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_3(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_4(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_5(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_6(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_7(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_8(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_9(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_10(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_11(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_12(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_13(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_14(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_15(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_16(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_17(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_18(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_19(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_20(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_21(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_22(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_23(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_24(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_25(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_26(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_27(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_28(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_29(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_30(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_31(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_32(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_33(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_34(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_35(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_36(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_37(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_38(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_39(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_40(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_41(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_42(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_43(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_44(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_45(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_46(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_47(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_48(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_49(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_50(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_51(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_52(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_53(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_54(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_55(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_56(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_57(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_58(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_59(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_60(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_61(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_62(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lookupTable_63(object): [0x080-0x17f] Lookup table holds Flash command sequences .value([‘string’, ‘number’], required): [0x080-0x17f] Lookup table holds Flash command sequences .
lutCustomSeq_0(object): [0x180-0x1af] Customizable LUT Sequences .bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16 .seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15 .reserved([‘string’, ‘number’]): Reserved .
lutCustomSeq_1(object): [0x180-0x1af] Customizable LUT Sequences .bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16 .seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15 .reserved([‘string’, ‘number’]): Reserved .
lutCustomSeq_2(object): [0x180-0x1af] Customizable LUT Sequences .bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16 .seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15 .reserved([‘string’, ‘number’]): Reserved .
lutCustomSeq_3(object): [0x180-0x1af] Customizable LUT Sequences .bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16 .seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15 .reserved([‘string’, ‘number’]): Reserved .
lutCustomSeq_4(object): [0x180-0x1af] Customizable LUT Sequences .bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16 .seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15 .reserved([‘string’, ‘number’]): Reserved .
lutCustomSeq_5(object): [0x180-0x1af] Customizable LUT Sequences .bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16 .seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15 .reserved([‘string’, ‘number’]): Reserved .
lutCustomSeq_6(object): [0x180-0x1af] Customizable LUT Sequences .bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16 .seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15 .reserved([‘string’, ‘number’]): Reserved .
lutCustomSeq_7(object): [0x180-0x1af] Customizable LUT Sequences .bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16 .seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15 .reserved([‘string’, ‘number’]): Reserved .
lutCustomSeq_8(object): [0x180-0x1af] Customizable LUT Sequences .bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16 .seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15 .reserved([‘string’, ‘number’]): Reserved .
lutCustomSeq_9(object): [0x180-0x1af] Customizable LUT Sequences .bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16 .seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15 .reserved([‘string’, ‘number’]): Reserved .
lutCustomSeq_10(object): [0x180-0x1af] Customizable LUT Sequences .bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16 .seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15 .reserved([‘string’, ‘number’]): Reserved .
lutCustomSeq_11(object): [0x180-0x1af] Customizable LUT Sequences .bitfields(object, required)seqNum([‘string’, ‘number’]): Sequence Number, valid number: 1-16 .seqId([‘string’, ‘number’]): Sequence Index, valid number: 0-15 .reserved([‘string’, ‘number’]): Reserved .
reserved4_0(object): [0x1b0-0x1bf] Reserved for future use .value([‘string’, ‘number’], required): [0x1b0-0x1bf] Reserved for future use .
reserved4_1(object): [0x1b0-0x1bf] Reserved for future use .value([‘string’, ‘number’], required): [0x1b0-0x1bf] Reserved for future use .
reserved4_2(object): [0x1b0-0x1bf] Reserved for future use .value([‘string’, ‘number’], required): [0x1b0-0x1bf] Reserved for future use .
reserved4_3(object): [0x1b0-0x1bf] Reserved for future use .value([‘string’, ‘number’], required): [0x1b0-0x1bf] Reserved for future use .
pageSize(object): Page size of Serial NOR .value([‘string’, ‘number’], required): Page size of Serial NOR .
sectorSize(object): Sector size of Serial NOR .value([‘string’, ‘number’], required): Sector size of Serial NOR .
ipcmdSerialClkFreq(object): Clock frequency for IP command .value([‘string’, ‘number’], required): Clock frequency for IP command .
isUniformBlockSize(object): Sector/Block size is the same .value([‘string’, ‘number’], required): Sector/Block size is the same .
isDataOrderSwapped(object): Data order (D0, D1, D2, D3) is swapped (D1,D0, D3, D2) .value([‘string’, ‘number’], required): Data order (D0, D1, D2, D3) is swapped (D1,D0, D3, D2) .
reserved0_0(object): Reserved for future use .value([‘string’, ‘number’], required): Reserved for future use .
serialNorType(object): Serial NOR Flash type: 0/1/2/3 .value([‘string’, ‘number’], required): Serial NOR Flash type: 0/1/2/3 .
needExitNoCmdMode(object): Need to exit NoCmd mode before other IP command .value([‘string’, ‘number’], required): Need to exit NoCmd mode before other IP command .
halfClkForNonReadCmd(object): Half the Serial Clock for non-read command: true/false .value([‘string’, ‘number’], required): Half the Serial Clock for non-read command: true/false .
needRestoreNoCmdMode(object): Need to Restore NoCmd mode after IP commmand execution .value([‘string’, ‘number’], required): Need to Restore NoCmd mode after IP commmand execution .
blockSize(object): Block size .value([‘string’, ‘number’], required): Block size .
flashStateCtx(object): Flash State Context .value([‘string’, ‘number’], required): Flash State Context .
reserve2_0(object): Reserved for future use .value([‘string’, ‘number’], required): Reserved for future use .
reserve2_1(object): Reserved for future use .value([‘string’, ‘number’], required): Reserved for future use .
reserve2_2(object): Reserved for future use .value([‘string’, ‘number’], required): Reserved for future use .
reserve2_3(object): Reserved for future use .value([‘string’, ‘number’], required): Reserved for future use .
reserve2_4(object): Reserved for future use .value([‘string’, ‘number’], required): Reserved for future use .
reserve2_5(object): Reserved for future use .value([‘string’, ‘number’], required): Reserved for future use .
reserve2_6(object): Reserved for future use .value([‘string’, ‘number’], required): Reserved for future use .
reserve2_7(object): Reserved for future use .value([‘string’, ‘number’], required): Reserved for future use .
reserve2_8(object): Reserved for future use .value([‘string’, ‘number’], required): Reserved for future use .
reserve2_9(object): Reserved for future use .value([‘string’, ‘number’], required): Reserved for future use .
# =========== FCB template for rw61x and flexspi_nor ===========
# ----------------------------------------------------------------------------------------------------
# == FCB template for rw61x and flexspi_nor ==
# ----------------------------------------------------------------------------------------------------
family: CHOOSE_FROM_TABLE # [Required], MCU family name; Possible options:['lpc55s3x', 'rt101x', 'rt102x', 'rt104x', 'rt105x', 'rt106x', 'rt116x', 'rt117x', 'rt118x', 'rt5xx', 'rt6xx', 'rw61x']
revision: a1 # [Optional], Chip silicon revision; If needed this could be used to specify silicon revision of device; Possible options:['latest']
type: flexspi_nor # [Required], Memory type; Specify type of memory used by FCB description; Possible options:['flexspi_nor']
fcb_settings: # [Required], rw61x
tag: # [Optional], tag; [0x000-0x003] Tag, fixed value 0x42464346UL
value: '0x00000000' # [Required], tag; [0x000-0x003] Tag, fixed value 0x42464346UL
version: # [Optional], version; [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix
value: '0x00000000' # [Required], version; [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix
reserved0: # [Optional], reserved0; [0x008-0x00b] Reserved for future use
value: '0x00000000' # [Required], reserved0; [0x008-0x00b] Reserved for future use
readSampleClkSrc: # [Optional], readSampleClkSrc; [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3
value: '0x00' # [Required], readSampleClkSrc; [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3
csHoldTime: # [Optional], csHoldTime; [0x00d-0x00d] CS hold time, default value: 3
value: '0x00' # [Required], csHoldTime; [0x00d-0x00d] CS hold time, default value: 3
csSetupTime: # [Optional], csSetupTime; [0x00e-0x00e] CS setup time, default value: 3
value: '0x00' # [Required], csSetupTime; [0x00e-0x00e] CS setup time, default value: 3
columnAddressWidth: # [Optional], columnAddressWidth; [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For Serial NAND, need to refer to datasheet
value: '0x00' # [Required], columnAddressWidth; [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For Serial NAND, need to refer to datasheet
deviceModeCfgEnable: # [Optional], deviceModeCfgEnable; [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable
value: '0x00' # [Required], deviceModeCfgEnable; [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable
deviceModeType: # [Optional], deviceModeType; [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, Generic configuration, etc.
value: '0x00' # [Required], deviceModeType; [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, Generic configuration, etc.
waitTimeCfgCommands: # [Optional], waitTimeCfgCommands; [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for DPI/QPI/OPI switch or reset command
value: '0x0000' # [Required], waitTimeCfgCommands; [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for DPI/QPI/OPI switch or reset command
deviceModeSeq: # [Optional], deviceModeSeq; [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt sequence number, [31:16] Reserved
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; Reserved
deviceModeArg: # [Optional], deviceModeArg; [0x018-0x01b] Argument/Parameter for device configuration
value: '0x00000000' # [Required], deviceModeArg; [0x018-0x01b] Argument/Parameter for device configuration
configCmdEnable: # [Optional], configCmdEnable; [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable
value: '0x00' # [Required], configCmdEnable; [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable
configModeType_0: # [Optional], configModeType_0; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
value: '0x00' # [Required], configModeType_0; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
configModeType_1: # [Optional], configModeType_1; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
value: '0x00' # [Required], configModeType_1; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
configModeType_2: # [Optional], configModeType_2; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
value: '0x00' # [Required], configModeType_2; [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
configCmdSeqs_0: # [Optional], configCmdSeqs_0; [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; Reserved
configCmdSeqs_1: # [Optional], configCmdSeqs_1; [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; Reserved
configCmdSeqs_2: # [Optional], configCmdSeqs_2; [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; Reserved
reserved1: # [Optional], reserved1; [0x02c-0x02f] Reserved for future use
value: '0x00000000' # [Required], reserved1; [0x02c-0x02f] Reserved for future use
configCmdArgs_0: # [Optional], configCmdArgs_0; [0x030-0x03b] Arguments/Parameters for device Configuration commands
value: '0x00000000' # [Required], configCmdArgs_0; [0x030-0x03b] Arguments/Parameters for device Configuration commands
configCmdArgs_1: # [Optional], configCmdArgs_1; [0x030-0x03b] Arguments/Parameters for device Configuration commands
value: '0x00000000' # [Required], configCmdArgs_1; [0x030-0x03b] Arguments/Parameters for device Configuration commands
configCmdArgs_2: # [Optional], configCmdArgs_2; [0x030-0x03b] Arguments/Parameters for device Configuration commands
value: '0x00000000' # [Required], configCmdArgs_2; [0x030-0x03b] Arguments/Parameters for device Configuration commands
reserved2: # [Optional], reserved2; [0x03c-0x03f] Reserved for future use
value: '0x00000000' # [Required], reserved2; [0x03c-0x03f] Reserved for future use
controllerMiscOption: # [Optional], controllerMiscOption; [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more details
value: '0x00000000' # [Required], controllerMiscOption; [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more details
deviceType: # [Optional], deviceType; [0x044-0x044] Device Type: See Flash Type Definition for more details
value: '0x00' # [Required], deviceType; [0x044-0x044] Device Type: See Flash Type Definition for more details
sflashPadType: # [Optional], sflashPadType; [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
value: '0x00' # [Required], sflashPadType; [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
serialClkFreq: # [Optional], serialClkFreq; [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot Chapter for more details
value: '0x00' # [Required], serialClkFreq; [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot Chapter for more details
lutCustomSeqEnable: # [Optional], lutCustomSeqEnable; [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot be done using 1 LUT sequence, currently, only applicable to HyperFLASH
value: '0x00' # [Required], lutCustomSeqEnable; [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot be done using 1 LUT sequence, currently, only applicable to HyperFLASH
reserved3_0: # [Optional], reserved3_0; [0x048-0x04f] Reserved for future use
value: '0x00000000' # [Required], reserved3_0; [0x048-0x04f] Reserved for future use
reserved3_1: # [Optional], reserved3_1; [0x048-0x04f] Reserved for future use
value: '0x00000000' # [Required], reserved3_1; [0x048-0x04f] Reserved for future use
sflashA1Size: # [Optional], sflashA1Size; [0x050-0x053] Size of Flash connected to A1
value: '0x00000000' # [Required], sflashA1Size; [0x050-0x053] Size of Flash connected to A1
sflashA2Size: # [Optional], sflashA2Size; [0x054-0x057] Size of Flash connected to A2
value: '0x00000000' # [Required], sflashA2Size; [0x054-0x057] Size of Flash connected to A2
sflashB1Size: # [Optional], sflashB1Size; [0x058-0x05b] Size of Flash connected to B1
value: '0x00000000' # [Required], sflashB1Size; [0x058-0x05b] Size of Flash connected to B1
sflashB2Size: # [Optional], sflashB2Size; [0x05c-0x05f] Size of Flash connected to B2
value: '0x00000000' # [Required], sflashB2Size; [0x05c-0x05f] Size of Flash connected to B2
csPadSettingOverride: # [Optional], csPadSettingOverride; [0x060-0x063] CS pad setting override value
value: '0x00000000' # [Required], csPadSettingOverride; [0x060-0x063] CS pad setting override value
sclkPadSettingOverride: # [Optional], sclkPadSettingOverride; [0x064-0x067] SCK pad setting override value
value: '0x00000000' # [Required], sclkPadSettingOverride; [0x064-0x067] SCK pad setting override value
dataPadSettingOverride: # [Optional], dataPadSettingOverride; [0x068-0x06b] data pad setting override value
value: '0x00000000' # [Required], dataPadSettingOverride; [0x068-0x06b] data pad setting override value
dqsPadSettingOverride: # [Optional], dqsPadSettingOverride; [0x06c-0x06f] DQS pad setting override value
value: '0x00000000' # [Required], dqsPadSettingOverride; [0x06c-0x06f] DQS pad setting override value
timeoutInMs: # [Optional], timeoutInMs; [0x070-0x073] Timeout threshold for read status command
value: '0x00000000' # [Required], timeoutInMs; [0x070-0x073] Timeout threshold for read status command
commandInterval: # [Optional], commandInterval; [0x074-0x077] CS deselect interval between two commands
value: '0x00000000' # [Required], commandInterval; [0x074-0x077] CS deselect interval between two commands
dataValidTime_0: # [Optional], dataValidTime_0; [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B
bitfields: # [Required]
time_100ps: 0 # [Optional], time_100ps; Data valid time, in terms of 100ps
delay_cells: 0 # [Optional], delay_cells; Data valid time, in terms of delay cells
dataValidTime_1: # [Optional], dataValidTime_1; [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B
bitfields: # [Required]
time_100ps: 0 # [Optional], time_100ps; Data valid time, in terms of 100ps
delay_cells: 0 # [Optional], delay_cells; Data valid time, in terms of delay cells
busyOffset: # [Optional], busyOffset; [0x07c-0x07d] Busy offset, valid value: 0-31
value: '0x0000' # [Required], busyOffset; [0x07c-0x07d] Busy offset, valid value: 0-31
busyBitPolarity: # [Optional], busyBitPolarity; [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - busy flag is 0 when flash device is busy
value: '0x0000' # [Required], busyBitPolarity; [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - busy flag is 0 when flash device is busy
lookupTable_0: # [Optional], lookupTable_0; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_0; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_1: # [Optional], lookupTable_1; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_1; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_2: # [Optional], lookupTable_2; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_2; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_3: # [Optional], lookupTable_3; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_3; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_4: # [Optional], lookupTable_4; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_4; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_5: # [Optional], lookupTable_5; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_5; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_6: # [Optional], lookupTable_6; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_6; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_7: # [Optional], lookupTable_7; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_7; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_8: # [Optional], lookupTable_8; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_8; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_9: # [Optional], lookupTable_9; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_9; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_10: # [Optional], lookupTable_10; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_10; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_11: # [Optional], lookupTable_11; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_11; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_12: # [Optional], lookupTable_12; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_12; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_13: # [Optional], lookupTable_13; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_13; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_14: # [Optional], lookupTable_14; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_14; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_15: # [Optional], lookupTable_15; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_15; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_16: # [Optional], lookupTable_16; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_16; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_17: # [Optional], lookupTable_17; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_17; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_18: # [Optional], lookupTable_18; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_18; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_19: # [Optional], lookupTable_19; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_19; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_20: # [Optional], lookupTable_20; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_20; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_21: # [Optional], lookupTable_21; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_21; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_22: # [Optional], lookupTable_22; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_22; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_23: # [Optional], lookupTable_23; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_23; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_24: # [Optional], lookupTable_24; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_24; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_25: # [Optional], lookupTable_25; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_25; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_26: # [Optional], lookupTable_26; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_26; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_27: # [Optional], lookupTable_27; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_27; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_28: # [Optional], lookupTable_28; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_28; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_29: # [Optional], lookupTable_29; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_29; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_30: # [Optional], lookupTable_30; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_30; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_31: # [Optional], lookupTable_31; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_31; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_32: # [Optional], lookupTable_32; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_32; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_33: # [Optional], lookupTable_33; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_33; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_34: # [Optional], lookupTable_34; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_34; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_35: # [Optional], lookupTable_35; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_35; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_36: # [Optional], lookupTable_36; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_36; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_37: # [Optional], lookupTable_37; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_37; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_38: # [Optional], lookupTable_38; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_38; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_39: # [Optional], lookupTable_39; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_39; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_40: # [Optional], lookupTable_40; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_40; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_41: # [Optional], lookupTable_41; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_41; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_42: # [Optional], lookupTable_42; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_42; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_43: # [Optional], lookupTable_43; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_43; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_44: # [Optional], lookupTable_44; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_44; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_45: # [Optional], lookupTable_45; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_45; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_46: # [Optional], lookupTable_46; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_46; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_47: # [Optional], lookupTable_47; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_47; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_48: # [Optional], lookupTable_48; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_48; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_49: # [Optional], lookupTable_49; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_49; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_50: # [Optional], lookupTable_50; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_50; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_51: # [Optional], lookupTable_51; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_51; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_52: # [Optional], lookupTable_52; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_52; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_53: # [Optional], lookupTable_53; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_53; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_54: # [Optional], lookupTable_54; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_54; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_55: # [Optional], lookupTable_55; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_55; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_56: # [Optional], lookupTable_56; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_56; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_57: # [Optional], lookupTable_57; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_57; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_58: # [Optional], lookupTable_58; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_58; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_59: # [Optional], lookupTable_59; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_59; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_60: # [Optional], lookupTable_60; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_60; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_61: # [Optional], lookupTable_61; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_61; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_62: # [Optional], lookupTable_62; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_62; [0x080-0x17f] Lookup table holds Flash command sequences
lookupTable_63: # [Optional], lookupTable_63; [0x080-0x17f] Lookup table holds Flash command sequences
value: '0x00000000' # [Required], lookupTable_63; [0x080-0x17f] Lookup table holds Flash command sequences
lutCustomSeq_0: # [Optional], lutCustomSeq_0; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; Reserved
lutCustomSeq_1: # [Optional], lutCustomSeq_1; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; Reserved
lutCustomSeq_2: # [Optional], lutCustomSeq_2; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; Reserved
lutCustomSeq_3: # [Optional], lutCustomSeq_3; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; Reserved
lutCustomSeq_4: # [Optional], lutCustomSeq_4; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; Reserved
lutCustomSeq_5: # [Optional], lutCustomSeq_5; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; Reserved
lutCustomSeq_6: # [Optional], lutCustomSeq_6; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; Reserved
lutCustomSeq_7: # [Optional], lutCustomSeq_7; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; Reserved
lutCustomSeq_8: # [Optional], lutCustomSeq_8; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; Reserved
lutCustomSeq_9: # [Optional], lutCustomSeq_9; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; Reserved
lutCustomSeq_10: # [Optional], lutCustomSeq_10; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; Reserved
lutCustomSeq_11: # [Optional], lutCustomSeq_11; [0x180-0x1af] Customizable LUT Sequences
bitfields: # [Required]
seqNum: 0 # [Optional], seqNum; Sequence Number, valid number: 1-16
seqId: 0 # [Optional], seqId; Sequence Index, valid number: 0-15
reserved: 0 # [Optional], reserved; Reserved
reserved4_0: # [Optional], reserved4_0; [0x1b0-0x1bf] Reserved for future use
value: '0x00000000' # [Required], reserved4_0; [0x1b0-0x1bf] Reserved for future use
reserved4_1: # [Optional], reserved4_1; [0x1b0-0x1bf] Reserved for future use
value: '0x00000000' # [Required], reserved4_1; [0x1b0-0x1bf] Reserved for future use
reserved4_2: # [Optional], reserved4_2; [0x1b0-0x1bf] Reserved for future use
value: '0x00000000' # [Required], reserved4_2; [0x1b0-0x1bf] Reserved for future use
reserved4_3: # [Optional], reserved4_3; [0x1b0-0x1bf] Reserved for future use
value: '0x00000000' # [Required], reserved4_3; [0x1b0-0x1bf] Reserved for future use
pageSize: # [Optional], pageSize; Page size of Serial NOR
value: '0x00000000' # [Required], pageSize; Page size of Serial NOR
sectorSize: # [Optional], sectorSize; Sector size of Serial NOR
value: '0x00000000' # [Required], sectorSize; Sector size of Serial NOR
ipcmdSerialClkFreq: # [Optional], ipcmdSerialClkFreq; Clock frequency for IP command
value: '0x00' # [Required], ipcmdSerialClkFreq; Clock frequency for IP command
isUniformBlockSize: # [Optional], isUniformBlockSize; Sector/Block size is the same
value: '0x00' # [Required], isUniformBlockSize; Sector/Block size is the same
isDataOrderSwapped: # [Optional], isDataOrderSwapped; Data order (D0, D1, D2, D3) is swapped (D1,D0, D3, D2)
value: '0x00' # [Required], isDataOrderSwapped; Data order (D0, D1, D2, D3) is swapped (D1,D0, D3, D2)
reserved0_0: # [Optional], reserved0_0; Reserved for future use
value: '0x00' # [Required], reserved0_0; Reserved for future use
serialNorType: # [Optional], serialNorType; Serial NOR Flash type: 0/1/2/3
value: '0x00' # [Required], serialNorType; Serial NOR Flash type: 0/1/2/3
needExitNoCmdMode: # [Optional], needExitNoCmdMode; Need to exit NoCmd mode before other IP command
value: '0x00' # [Required], needExitNoCmdMode; Need to exit NoCmd mode before other IP command
halfClkForNonReadCmd: # [Optional], halfClkForNonReadCmd; Half the Serial Clock for non-read command: true/false
value: '0x00' # [Required], halfClkForNonReadCmd; Half the Serial Clock for non-read command: true/false
needRestoreNoCmdMode: # [Optional], needRestoreNoCmdMode; Need to Restore NoCmd mode after IP commmand execution
value: '0x00' # [Required], needRestoreNoCmdMode; Need to Restore NoCmd mode after IP commmand execution
blockSize: # [Optional], blockSize; Block size
value: '0x00000000' # [Required], blockSize; Block size
flashStateCtx: # [Optional], flashStateCtx; Flash State Context
value: '0x00000000' # [Required], flashStateCtx; Flash State Context
reserve2_0: # [Optional], reserve2_0; Reserved for future use
value: '0x00000000' # [Required], reserve2_0; Reserved for future use
reserve2_1: # [Optional], reserve2_1; Reserved for future use
value: '0x00000000' # [Required], reserve2_1; Reserved for future use
reserve2_2: # [Optional], reserve2_2; Reserved for future use
value: '0x00000000' # [Required], reserve2_2; Reserved for future use
reserve2_3: # [Optional], reserve2_3; Reserved for future use
value: '0x00000000' # [Required], reserve2_3; Reserved for future use
reserve2_4: # [Optional], reserve2_4; Reserved for future use
value: '0x00000000' # [Required], reserve2_4; Reserved for future use
reserve2_5: # [Optional], reserve2_5; Reserved for future use
value: '0x00000000' # [Required], reserve2_5; Reserved for future use
reserve2_6: # [Optional], reserve2_6; Reserved for future use
value: '0x00000000' # [Required], reserve2_6; Reserved for future use
reserve2_7: # [Optional], reserve2_7; Reserved for future use
value: '0x00000000' # [Required], reserve2_7; Reserved for future use
reserve2_8: # [Optional], reserve2_8; Reserved for future use
value: '0x00000000' # [Required], reserve2_8; Reserved for future use
reserve2_9: # [Optional], reserve2_9; Reserved for future use
value: '0x00000000' # [Required], reserve2_9; Reserved for future use